For future product return or exchange, this LOT number
is required. Please keep it for your reference.
04-1046B
LOT Number Part Number
1
Page 2
Key Features and Benefits
•Dual-mode wired and wireless operations use as a wireless mouse with the included
USB wireless receiver or wired mouse when
connected to a USB port using the included
USB cable
•8 function buttons including scroll wheel
enhances controllability while playing
games or surfing the internet
•Selectable 250Hz and 500Hz polling rates
enhance signal response plus the 4-level
adjustable DPI optical sensor (1000/1600/
2000/2400DPI) provides smooth and
precise movement
•Integrated 1200mAh Lithium Polymer
rechargeable battery provides hours of use,
dual-color power LED indicates battery
charge status
•Automatic power saving design with power
on-off switch further prolongs battery life
•LED backlight enhances the gaming
experience
2
Page 3
Specifications
Sensor TechnologyOptical
Connectivity T echnolo gyWireless / Wired
Wireless Technology2.4GHz
Wireless Operating Distance 10m
Wired Length4.92ft (1.5m)
Number of Buttons8-button
Supported ModeGaming / Mu ltimedia
DPI Resolu tio n1000 / 1600 / 2000 / 2400
Battery TypeLithium polymer battery
Battery Ca paci ty1200mAh
Operating Voltage3V
Operating: < 4mA
Current Consu mption
Charging Ti me6 hou rs
Colo rBlack
Dimensions4.53" (W) x 1.50" (H) x 3.07" (D)
Weight0.21 lbs
Operating Temperature-13 to 113 degrees F
Stand by: 1.3mA
Sleep mode: 50uA
System Requirements
•PC system with an available USB port
3
Page 4
Layout
In Gaming* or Multimedia** mode, some buttons
change function, refer to the layout images for
details.
Left button
Triple click*/Play or Pause**
Backward /Forward
buttons
Backlight (R-G-B)
Note: In multimedia mode, click Media Player's play/pause button (playback indicator) first and
the Mouse's Play, Pause, Backward and Forward functions will be available.
Right button
Scroll*/Volume (+/-)**
DPI*/Screen Off-On**
Screen Off-On*/Disabled**
Battery indicator: blinks
when battery recharge
is needed
Figure 1: Top Layout
Mode switch
- Multimedia
- Gaming (500Hz)***
- Gaming (250Hz)***
USB wireless receiver
storage compartment
*** Polling rate
USB Micro-B port
Power switch: See Figure 3
on page 5 for more details
Figure 2: Bottom Layout
4
Page 5
•Light: Power on for both modes
and light on
•ON: Power on for both modes
but light off
•OFF: Power on the wired mode
but light off. Power off the
wireless mode
Figure 3: Power Switch
Light
ON
OFF
Charging the Lithium Polymer Battery
1.Plug the Mouse into a USB port of your
computer using the included USB cable.
2.The battery indicator will be on during
charging. When fully charged the battery
indicator is off.
Note: When charging the battery while in
Wireless mode, the Mouse will
automatically switch to Wired mode. To
return to Wireless mode, simply unplug
the USB cable when charging is complete.
Installation
1.Power on the Mouse.
5
Page 6
2.Wireless mode: Remove the USB Wireless
Receiver from USB receiver storage
compartment and plug it into an available
USB port of your computer. Note: The Mouse
will automatically switch to Wired mode
when charging the Lithium Polymer battery.
See page 5 for more details.
Wired mode: Connect the Mouse to an
available USB port of your computer using
the included USB cable. Important: Remove
the USB wireless receiver from the storagecompartment for smooth operation.
3.Choose either Gaming or Multimedia mode
by sliding the Mode Switch into position.
Note: Some mouse buttons have different
functions in Gaming or Multimedia mode,
refer to page 4 for details.
- In wired mode, the polling rate is set as
500Hz for optimal performance.
- In wireless gaming mode, choose a higher
polling rate when using higher DPI
resolution for the best user experience.
6
Page 7
Technical Support and Warranty
QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with
new drivers and solutions. Answers to your questions could be just a few clicks away. You
can also submit questions online and a technical support analyst will promptly respond.
SIIG offers a 1-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for one (1) year from the date of purchase of the product. This warranty is
not transferable and is available only to the original purchaser of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product having
similar features and functionality) the product if defective in materials or workmanship.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request
will be processed, if the product is determined to be defective, an RMA number will
be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came with the
original package must be included
• Include a copy of your original sales receipt inside the package with date of
purchase and place of purchase circled and clearly visible
• Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping carton
• You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer
7
Page 8
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions
(including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy
I/O adapters) that bridge the connection between Desktop/Notebook systems
and external peripherals. SIIG continues to grow by adding A/V and Digital
Signage connectivity solutions to our extensive portfolio.
SIIG products offer comprehensive user manuals, many user-friendly features,
and are backed by an extensive manufacturer warranty. High quality control
standards are evident by the overall ease of installation and compatibility of
our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs,
through major distributors, system integrators, VARs and through e-commerce
sites.
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
Dual-Mode Wired/Wireless Rechargeable Backlit Mouse-8-Button is a trademark of SIIG,
Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in
this publication are for identification only and may be trademarks of their respective owners.