Page 1
USB Compact Multimedia
Keyboard
Quick Installation Guide
Introduction
The USB Compact Multimedia Keyboard is a USB
wired multimedia keyboard and requires no driver
installation. Simply plug the keyboard into an
available USB port of your computer and it is
ready to use.
Key Features and Benefits
• Space saving QWERTY keyboard design
with numeric keypad provides more efficient
work space
• 10 hot keys provides instant access to
internet, sleep mode, and multimedia
control
• Adjustable tilt legs for the perfect ergonomic
fit
• Durable laser printed keys can last up to 10
million keystrokes
04-0888A
1
Page 2
Package Contents
• USB Compact Multimedia Keyboard
System Requirements
• PC computer with an available USB port
• Windows
®
8 (32-/64-bit) / 7 (32-/64-bit) /
Vista (32-/64-bit) / XP (32-/64-bit) / Server
2003 & 2008 (32-/64-bit) / Server 2008 R2
/ Server 2012
Specifications
• Keyboard type: USB wired multimedia
keyboard
• Compliant with USB 1.1 specification
• Number of keys:
multimedia hot keys
102 keys, including 10
• Wired USB cable length: up to 5 ft
• Key press force: 53g +/- 7g
• Key switch life: ~ 10 million cycles
• Working Voltage: 5V
• Working Current: 55mA
• Dimensions: 17.2"(L) x 6.3"(W) x 1.08"(H)
2
Page 3
Layout
14
1-10
15
Figure 1: Front Layout
11-13
16
16
Figure 2: Rear Layout
3
Page 4
Hotkey Applications
Refer to the image below for the position and
definition of each hotkey. Simply press the hotkey
to enable the function.
Hotkeys
1 2 3 4 5 6 7 8 9 10
1. Sleep mode: Places the system into sleep
mode. Press the Sleep mode hotkey again to
resume from sleep mode
2. Web back: Return to previous webpage
3. Web forward: Go to the next webpage
4. Home page: Starts your default Web browser
and loads the home page
5. Mute: Mutes system sound
4
Page 5
6. Play/Pause: Switches between playing and
pausing the media player
7. Next: Switch to the next media track
8. Previous: Switch to the previous media track
9. Volume up: Increases system sound
10. Volume down: Decreases system sound
NOTE: Sleep mode hotkey has no function
in Windows Server 2003 & 2008 (32-/64bit)/2008 R2/Server 2012.
LED Indicators
LED indicators
11 12 13
5
Page 6
11. Num Lock LED indicator: Num Lock LED is
on the numeric keys are enabled; LED off
the numeric keys are disabled
12. Caps Lock LED indicator: Caps Lock LED on
letters will be typed uppercase; LED off
letters will be typed lowercase
13. Scroll Lock LED indicator: Scroll Lock LED on
all scrolling features are locked
Others
14. Windows key: Same as clicking Start button
on the Windows tool bar
15. Menu key: Same as right mouse button
16. Snap open legs: Adjusts tilt angle of the
keyboard for the best ergonomic fit
6
Page 7
Technical Support and Warranty
QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with
new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analysts will promptly
respond.
SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for two (2) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA or
fax a request to 510-657-5962. Your RMA request will be processed, if the product
is determined to be defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came with the
original package must be included.
• Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping
carton.
• You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.
7
Page 8
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions
(including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/
O adapters) that bridge the connection between Desktop/Notebook systems and
external peripherals. SIIG continues to grow by adding A/V and Digital
Signage connectivity solutions to our extensive portfolio.
SIIG products offer comprehensive user manuals, many user-friendly features,
and are backed by an extensive manufacturer warranty. High quality control
standards are evident by the overall ease of installation and compatibility of
our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs,
through major distributors, system integrators, and VARs in the Americas and
the UK, and through e-commerce sites.
PRODUCT NAME
USB Compact Multimedia Keyboard
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
USB Compact Multimedia Keyboard is a trademark of SIIG, Inc. SIIG and the SIIG logo are
registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of
Microsoft Corporation. All other names used in this publication are for identification only and
may be trademarks of their respective owners.
July, 2013 Copyright © 2013 by SIIG, Inc. All rights reserved
Loading...