SIIG Hi-Speed USB 4-Port PCI, Dual Profile Hi-Speed 4-Port PCI Quick Installation Manual

Dual Profile Hi-Speed
USB 4-Port PCI

Quick Installation Guide

Introduction

SIIG's Dual Profile Hi-Speed USB 4-Port PCI adapter is
designed to adds 4 High-Speed USB 2.0 ports (three
external and one internal) to connect up to four additional
USB devices to your desktop computer.

Features and Benefits

• Compliant with USB specifications revision 2.0

• Conforms to PCI specifications revision 2.2

• Supports simultaneous operation of multiple
high-speed USB 2.0 and USB 1.1 devices

• Supports high-speed (480 Mbps), full-speed (12
Mbps), and low-speed (1.5 Mbps) data transfer
modes

• User friendly hot-swapping feature allows you to
attach/remove USB devices without turning off
your system

04-0469D

1

System Requirements

PC:

®

• Pentium
PCI slot

• Windows
(32-/64-bit) / XP SP1 or later (32-bit) / XP (64-bit)
/ Server 2003 & 2008 (32-/64-bit) / Server 2008 R2
/ 2000 SP4

®

Mac

:

• Power Mac® G3 (blue & white) or later with an
available PCI slot

• Mac OS

or equivalent computer with an available

®

8 (32-/64-bit) / 7 (32-/64-bit) / Vista

®

10.2.8 or later

Package Contents

• Dual Profile Hi-Speed USB 4-Port PCI

• Spare enhanced low profile bracket

• Quick installation guide

2

Layout

External ports

Internal port

Figure 1: Board Layout

Hardware Installation

Note: For Low Profile systems, replace the currently
mounted bracket with the included Low Profile bracket.

General instructions for installing the card are provided
below. Since the design of computer cases and
motherboards vary, refer to your computer’s reference
manual for further information, if needed.

Static Electricity Discharge may permanently damage your
system. Discharge any static electricity build up in your
body by touching your computer's case for a few seconds.
Avoid any contact with internal parts and handle card only
by their external edges.

3