SIIG HDMI 4K HDBaseT Extender Over Single Cat5e/6 Cable with IR Control - 70m User Reference Manual
2
• Bi-directional IR sensors allow you to remotely
control the HDMI source device from the
remote display side or control the remote
display from the source device side
• High quality metal housing with ventilation
panels better promote the heat dissipation and
system stability during long hours of operation
Package Contents
• HDMI 4K HDBaseT Extender Over Single Cat5e/6
Cable with IR Control - 70m (TX & RX)
• Power adapter
• IR Blaster extension cable & IR Receiver
extension cable
• Mounting ears & screw kits
• User Reference Guide
7
Important Note: Incorrect placement of IR
Receiverand IR Blaster cables may result in
cable failures. Please check carefully before
plugging in the IR cables to proper IR sockets.
The IR Receiver cable always plugs into an IR
In port & IR Blaster cable always plugs into an
IR Out port.
• IR Blaster cable: Plug into the Transmitter's or
Receiver's IR Out to emit IR signals
• IR Receiver cable: Plug into the Receiver's or
Transmitter's IR In to receive IR signals
Control your media player (such as DVD) at the TV
side using the media player's remote controller
• Plug the IR Receiver cable to the Receiver's
IR In port
• Plug the IR Blaster cable to the Transmitter's
IR Out port.
Control your TV at the media player side using the
TV's remote controller
• Plug the IR Receiver cable to the Transmitter's
IR In port.
• Plug the IR Blaster cable to the Receiver's
IR Out port.
8
Hardware Installation
Note: To achieve optimal performance, a CAT6 cable
is recommended.
1. Power off all devices including your HDMI source
and display.
2. Connect your HDMI source to the Transmitter's
HDMI IN connector with an HDMI cable (not
included).
3. Optional: Connect the IR Receiver or Blaster
extension able according to the instructions on
page 6-7.
4. Connect your HDMI display to the Receiver's HDMI
OUT connector with an HDMI cable (not included).
5. Optional:Connect the IR Receiver or Blaster
extension cable according to the instructions on
page 6-7.
6. Connect and link the Transmitter and Receiver by
a CAT5e/6 cable.
7. Plug the included power adapter into the
Transmitter's or Receiver's Power Jack, then plug
the power adapter into a reliable power outlet.
(Note: It's recommended to connect it to the
Transmitter)
8. Power on your HDMI device and HDMI display.
9. The HDMI Extender is ready for use.
9
Application
Extends HDMI signals such as game consoles,
DVD players or computers up to 70m (230ft) and
supports bi-directional IR.
Figure 7: Application
DVD
IR OUT
IR OUT
IR IN
IR IN
ReceiverTransmitter
TV
* When using the remote control, please make sure its distance to the IR
Receiver extension cable is within 5 meters (16.4 ft) and without obstructions.
10
FAQ & Solutions
Q: The HDMI display doesn't display images:
A: Check the LED indicators' status to make sure all
connections are connected properly.
If the status is abnormal, check the followings:
1) Whether the power adapter is connected to
theTransmitter (TX) or Receiver (RX) securely.
2) Make sure the Network cable (CAT5e/6) is
rmlyconnected between TX and RX.
3) Make sure the HDMI cables are securely
connected.
- Between the HDMI source and the TX.
- Between the HDMI display and the RX.
Q: The LED Indicator (3) is ashing and there is no
image on the HDMI display:
A: Check if the HDMI display has been switched to
the right HDMI input channel.
Q: The Link LED (2) is flashing and LED Indicator (3) is
off:
A: 1) Check whether there is HDMI signal from HDMI
source.
2) Check whether the HDMI cable is securely
connected between the RX and HDMI display.
Q: The HDMI display is ashing and having
disturbance.
A: Try other HDMI cables to connect the HDMI source
to the TX.
11
Technical Support and Warranty
QUESTIONS?
SIIG’s
Online Support
has answers! Simply visit our web site at
www.
siig.com
and click
Support
. Our online support database is updated daily with new
drivers and solutions. Answers to your questions could be just a few clicks away. You
can also submit questions online and a technical support analyst will promptly respond.
SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for two (2) years from the date of purchase of the product. This warranty is
not transferable and is available only to the original purchaser of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product having
similar features and functionality) the product if defective in materials or workmanship.
This warranty gives you specic legal rights, and you may also have other rights which
vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1:
Submit your RMA request.
Go to
www.siig.com
, click
Support
, then
REQUEST A PRODUCT
REPLACEMENT
to submit a request to SIIG RMA or fax a request to 510-657-5962.
Your RMA request will be processed, if the product is determined to be defective, an
RMA number will be issued.
Step 2:
After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came with the
original package must be included
• Include a copy of your original sales receipt inside the package with date of
purchase and place of purchase circled and clearly visible
• Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping carton
• You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer
PRODUCT NAME
HDMI 4K HDBaseT Extender Over Single Cat5e/6 Cable with IR Control - 70m
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebook systems and external peripherals. SIIG continues to grow by
adding A/V and Digital Signage connectivity solutions to our extensive
portfolio. SIIG products offer comprehensive user manuals, many userfriendly features, and are backed by an extensive manufacturer warranty.
High quality control standards are evident by the overall ease of installation
and compatibility of our products, as well as one of the lowest defective
return rates in the industry. SIIG products can be found in computer retail
stores, mail order catalogs, through major distributors, system integrators,
VARs and through e-commerce sites.
HDMI 4K HDBaseT Extender Over Single Cat5e/6 Cable with IR Control - 70m is a
trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All
other names used in this publication are for identication only and may be trademarks of
their respective owners.
April, 2018 Copyright © 2018 by SIIG, Inc. All rights reserved.
Loading...