Page 1
1
ExpressCard/54 CF R/W
Quick Installation Guide
04-0470A
Features and Benefits
• Support CF Type I , CF Type II, MicroDrive, PIO
mode 0-6, and UDMA mode 0-4 (CF 3.0)
• Compliant with ExpressCard™ standard
• Suitable for desktop or laptop equipped with
ExpressCard™ /54 slot
• Extreme high speed: Transfer files up to
33MB/sec.
Note: Actual throughput may vary based on the
computer configuration.
Serial # Sticker
For future product return or exchange, this serial # is
required. Please keep it for your reference.
Page 2
2
System Requirements
• Notebook or desktop computer with an available
ExpressCard slot
• Windows® 2000/XP/Server 2003/Vista
Package Contents
• ExpressCard/54 CF R/W
• This quick installation guide
Layout
Figure 1. ExpressCard/54 CF R/W
Page 3
3
Installation
Hardware Installation
General instructions for installing the ExpressCard/54
CF R/W are provided below. Since the design of computers
vary, refer to your system’s reference manual for further
information, if needed.
1. Insert the ExpressCard/54 CF R/W into the
ExpressCard slot of the computer with it's Express
Card Connector facing the slot. Push the card into
the slot gently, yet firmly for a solid connection.
Note: Some ExpressCard slots will click when
the ExpressCard is fully inserted into the slot.
2. If your system was powered off when you plugged
in the ExpressCard, turn it on and go to Driver
Installation on page 3. Otherwise, go directly to
Driver Installation on page 3.
Driver Installation
Windows 2000, XP, Server 2003 and Vista automatically
detects and installs the correct driver for the
ExpressCard/54 CF R/W. No driver installation is needed.
Page 4
4
Verify Windows Installation
1. Check Device Manager to verify successful driver
installation.
For 2000/XP/Server 2003: Right click My Computer,
click Manage
For Windows Vista™: Right click Computer,
click Manage, click Continue.
2. Click Device Manager.
3. Click on the + (plus sign) in front of Disk Drives,
Generic STORAGE DEVICE USB Device should
be displayed.
Inserting Memory Card
CompactFlash memory cards are keyed for proper easy
insertion into the card reader with minimum
pressure. Make sure the CompactFlash label is facing up
when inserted.
Note: In some systems, CompactFlash memory card
will not go in properly when the ExpressCard/54 CF
R/W is inserted. In this case, the ExpressCard/54 CF
R/W must be remove from the ExpressCard slot
before inserting the CompactFlash memory card.
Page 5
5
Removing Memory Cards
Memory cards can be removed at any time. Gently pull
the memory card from the ExpressCard/54 CF R/W.
Accessing Memory Cards
When the reader/writer is successfully installed, a
Removable Disk icon will appear in My Computer. To
access the memory card, double click the disk icon.
Removing the ExpressCard
Before ejecting the ExpressCard/54 CF R/W from the
ExpressCard slot, first use the Safely Remove Hardware
utility to stop it. Not following the steps below could lead
to system crashes, data corruption or data loss. Follow the
steps below for your version of Windows.
For Windows 2000
1. Click the Unplug or Eject Hardware icon located
in the taskbar by the system clock.
2. Click Stop USB Mass StorageDevice.....
3. At the Safe To Remove Hardware box, click
OK. The ExpressCard/54 CF R/W can be ejected.
3. When Safe to Remove Hardware box pops up,
the ExpressCard/54 CF R/W can be ejected.
Page 6
6
For Windows XP/Server 2003/Vista
1. Click the Safely Remove Hardware icon located
in the taskbar by the system clock.
2. Click Safely remove USB Mass Storage
Device.....
3. When Safe to Remove Hardware box pops up,
the ExpressCard/54 CF R/W can be ejected.
Page 7
7
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily
with new drivers and solutions. Answers to your questions could be just a few
clicks away. You can also submit questions online and a technical support
analysts will promptly respond.
SIIG offers a 5-year manufacturer warranty with this product. Please see our web
site for more warranty details. If you encounter any problems with this product,
please follow the procedures below.
If it is within the store's return policy period, please return the
product to the store where you purchased from. If your purchase has passed the
store's return policy period, please follow these steps to have the product repaired
or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to submit a
request to
SIIG RMA. If the product is determined to be
defective, an RMA number will be issued. SIIG RMA department can also be
reached at (510) 413-5333.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came with
the original package must be included.
• Clearly write your RMA number on the top of the returned package. SIIG
will refuse to accept any shipping package, and will not be responsible
for a product returned without an RMA number posted on the outside of
the shipping carton.
• You are responsible for the cost of shipping. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #: ________________
• SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
Page 8
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O
connectivity products, including PCI & ISA serial and parallel ports, USB, Serial
ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards,
and other accessories. SIIG is the premier one-stop source of upgrades.
SIIG products offer comprehensive user manuals, many user-friendly features,
and are backed by an extensive manufacturer warranty. High-quality control
standards are evident by the overall ease of installation and compatibility of
our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs,
through major distributors, system integrators, and VARs in the Americas and
the UK, and through e-commerce sites.
ExpressCard/54 CF R/W is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are registered trademarks
of Microsoft Corporation. Other names used in this publication are for identification only
and may be trademarks of their respective companies.
October, 2007 Copyright © 2007 by SIIG, Inc. All rights reserved.
PRODUCT NAME
ExpressCard/54 CF R/W
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Loading...