SIIG Digital to Analog Audio Converter, 3-in-1 USB Power Bank Charger Quick Installation Manual

1

Digital to Analog Audio
Converter
Quick Installation Guide

04-0750A

Introduction

The Digital to Analog Audio Converter allows you
to convert digital audio to analog L/R stereo.

Key Features and Benefits

• Converts Coaxial or Toslink digital audio to
analog L/R stereo output

• Supports audio sampling rate at 32, 44.1,
48 and 96KHz

• Provides electromagnetic-noise-free
transmission

• Easy to install and simple to operate

• Metal housing for better RF shielding

Serial Number Sticker

For future product return or exchange, this serial
number is required. Please keep it for your
reference.

2

Layout

Figure 1: Input

Figure 2: Output

Coaxial

Toslink

Power LED

RCA (R/L)Power Jack

Package Contents

• Digital to Analog Audio Converter

• Power adapter

• Quick installation guide

3

Hardware Installation

1. Power off all devices you plan to connect to
this converter.

2. Connect your audio source to the converter’s
Input connector using a Toslink or Coaxial
cable (not included).

3. Connect your A/V receiver or amplifier to
the converter’s Output connectors using a
R/L cable (not included).

4. Connect the converter's power adapter.

5. Turn on the A/V receiver or amplifier, then
the audio source.

6. The Digital to Analog Audio Converter is now
ready to use.

4

Blank page

5

Blank page

6

Blank page

7

Technical Support and Warranty

QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at

www.siig.com and click Support. Our online support database is updated daily with
new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analyst will promptly
respond.

SIIG offers a 3-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for three (3) years from the date of purchase of the product.

SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. Please see our web site for more warranty details.

If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store

where you purchased from.

B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.

Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT

to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request
will be processed, if the product is determined to be defective, an RMA number will
be issued.

Step 2: After obtaining an RMA number, ship the product.

• Properly pack the product for shipping. All accessories that came with the
original package must be included.

• Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping
carton.

• You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:

SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:

• SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.

PRODUCT NAME

Digital to Analog Audio Converter

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.

6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: [phone]

Digital to Analog Audio Converter is a trademark of SIIG, Inc. SIIG and the SIIG logo are
registered trademarks of SIIG, Inc. All other names used in this publication are for identification
only and may be trademarks of their respective owners.

November, 2011 Copyright © 2011 by SIIG, Inc. All rights reserved

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions
(including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/
O adapters) that bridge the connection between Desktop/Notebook systems and
external peripherals. SIIG continues to grow by adding A/V and Digital
Signage connectivity solutions to our extensive portfolio.
SIIG products offer comprehensive user manuals, many user-friendly features,
and are backed by an extensive manufacturer warranty. High quality control
standards are evident by the overall ease of installation and compatibility of
our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs,
through major distributors, system integrators, and VARs in the Americas and
the UK, and through e-commerce sites.