SIIG CE-S00012-S2 Quick Installation Manual

1

USB SoundWave 7.1
Quick Installation Guide

Introducing the USB SoundWave 7.1

The USB SoundWave 7.1 is a portable sound controller that
simulates 7.1-channel sound to headphones or 2-channel
speakers.

Features and Benefits

• Turns 2-channel audio into DVD-quality 7.1-channel
sound

• Built-in amplifier for rich and powerful sound

• Supports EAX 2.0, A3D 1.0, and Microsoft
DirectSound 3D

• Xear 3D software offers 27 environment effects and
3 environment sizes, plus a 10-band preset equalizer

• Supports Plug & Play and obtains power from USB
port

Serial # Sticker

For future product return or exchange, this serial # is
required. Please keep it for your reference.

04-0421A

2

Requirements

• Pentium II-350MHz or equivalent PC with 128MB
RAM

• An available USB port

• Windows 2000/XP/Server 2003

Package Contents

• USB SoundWave 7.1

• USB extension cable

• Software CD

• This quick installation guide

Layout

Figure 1. Layout

USB Connector

Power/Activity LED

Speaker/Headphone
Jack

3

Driver Installation

Windows 2000/XP/Server 2003 will automatically detect
and install the correct drivers for the USB SoundWave 7.1
when connected.

To Verify Succesfull Driver Installation

1. Right click My Computer, click Manage, then click

Device Manager.

2. Double click Sound, video and game controllers,

USB Audio Device should be displayed.

Utilities Software

Included on the USB SoundWave 7.1 software CD is the
Xear 3D Audio Configuration Utility, Mixer and Equalizer.
Install this utility to provide simulated 7.1 channel sound.

Installing Xear 3D Software

1. Insert the software CD. Autorun should start the

installation. If Autorun doesn't start, click Start,
then Run. Type X:\setup.exe, then click OK.
(Replace X: with the drive letter of your CD-ROM)

2. Click Next, Next, Next

3. Click Finish to restart Windows.

Note: Installing Xear 3D software will change USB
Audio Device to C-Media USB Sound Device in

Device Manager.