SIIG CE-HM0051-S1 Quick Installation Manual
1
Introducing the HDMI Extender
The HDMI Extender over 2 CAT5e with IR boosts your
audio/video transmission distance up to 60m (200ft) in
HDTV 1080i format. With two cost effective CAT5e/6
cables, users can readily extend an HDMI source such as
a DVD player, Blu-ray Disc player, game console, PC,
and any other TMDS compliant devices to a remote
HDMI/DVI TV or LCD monitor. This cost effective
solution provides flexibility for HDMI enabled devices
to transmit high quality audio/video to greater distances
at minimal cost.
Features and Benefits
• HDMI 1.3a and HDCP compliant
• Extends audio/video transmission from an HDMI
source to an HDMI display over two economical
CAT5e/6 cables
• Controls source devices from the remote side
instantly
• Embedded IR control path
• Minimize cable skew with the adjustable 8-level
equalization knob
• Supports distances up to 60m/200ft @ 720p/1080i
or 40m/130ft @ 1080p
04-0508A
HDMI Extender over 2
CAT5e with IR
Quick Installation Guide
2
Package Contents
• HDMI transmitter (TX)
• HDMI receiver (RX)
• 1x Power adapter (5V, 4A)
• IR transmitter extension cable (90cm/3ft)
• IR receiver extension cable (90cm/3ft)
• Quick Installation Guide
Layout
Figure 1: Transmitter (front & back)
• HDMI In: connect to a HDMI source with an HDMI
M-M cable (not included) here
• IR Extender: this is the IR sending socket, connect
the IR transmitter extension cable here
• TMDS: plug in a CAT5e/6 cable, links to the TMDS
connector of the receiving unit
• DDC: plug in a CAT5e/6 cable, links to the DDC
connector of the receiving unit
3
Figure 2: Receiver (front & back)
• HDMI Out: connect an HDMI display with an HDMI
M-M cable (not included) here
• EQ: adjusts the equilization of the received signal
from 0 (strongest) to 7 (weakest). It is recommended
to switch from 0 to 7 to find the optimal visual
experience
• IR Extender: this is IR receiving socket, connect the
IR receiver extension cable here
• TMDS: plug in a CAT5e/6 cable, links to the TMDS
connector of the transmitting unit
• DDC: plug in a CAT5e/6 cable, links to the DDC
connector of the transmitting unit
• +5V DC: connect to the included 5V power adapter
Loading...