Page 1
Dear Valued Customer
( JUST WANTED YOU TO KNOW )
WE REALLY
APPRECIATE
YOUR PURCHASE
~thank you~
Page 2
Features
• Supports video resolution outputs up
to 4K2K@60 4:4:4 8bit, HDR 10bits, 12bits,
16bits
• Built-in 3 video patterns
• Both HDMI input and output support up
to HDMI 2.0 Video bandwidth 18Gbps
• Fundamental HDMI feature analysis up to
4K2K@60 4:4:4 8bit HDMI 2.0 input
• HDCP 1.4 & 2.2 compliant
• Tests cable quality
• Provides statistics analysis for cable
quality or connection stability
• Hand-held pocket size
• Battery powered for portability, it can
extend operation time with full load up to
3 hours
• Rechargeable battery design with short
charging time about 3 hours
Page 3
Notes
• Not supporting 4K2K60 DVI mode
• 4K60 (YUV 4:2:0) 10bits is common resolution
• Pattern will be dierent under dierent
resolution
• Before using, please plugging the power
adapter to switch o the shipping mode
• Device will automatically enter battery
saving mode after 1 minute idle. During
battery saving mode, if user would like
to get device back to work, please push
any button. Notice that when plugging in
an active HDMI input, device will NOT
enter battery saving mode.
Package contents
• HDMI 2.0 4K HDR Installation Gear
• USB-A to micro B cable
• User Manual
Page 4
1. Button (ENTER)
2. Button (DOWN)
3. Button (UP)
4. LCD Display
5. OUTPUT: HDMI output
6. Micro-USB: Firmware update / Recharge
7. INPUT: HDMI input
8. Power Switch: Power ON/OFF Switch
Layout
Page 5
Source Mode
When device is treated as a source, it can gener-
ate different test patterns to the display under
test.
1. Make sure the connection between the device
HDMI output port and the display.
2. Use buttons to select MODE category and
enter SOURCE mode.
3. Use buttons to set up the output signal for-
mat and video testing pattern.
Page 6
Sink Mode
When device is in sink mode, it can read the HDMI
source information and in addition, the input
HDMI can be passed through to HDMI capable
display if needed
1. Connect the device between HDMI
source and HDMI display.
2. Use buttons to select MODE category
and enter SINK mode.
3. The process of acquiring HDMI info will
take about 3~5 seconds
Page 7
Sink Mode
In this mode, device oers a link quality estima-
tor following the Character Error Detection
mechanism from HDMI 2.0 specification. The
estimator can provide a basic link quality evalu-
ation regarding the cable or any other HDMI
link connected to device. Please notice that the
evaluation result can provide an insight into the
link quality under testing, but not always reects
the real robustness of HDMI 2.0 full bandwidth
connection. The stability of the full bandwidth
HDMI 2.0 connection is affected not only by
the cable or link quality but also many other
factors, such as, the signal integrity of the source,
the ambient temperature, the reception of the
display, and so on. Therefore the testing result is
just for a reference.
1. Make sure the tight connection
Page 8
between the device and the cable.
2. Use buttons to select MODE category
and enter CABLE mode.
3. Keep pressing ENTER button for about
5 seconds to start the link test. The
device will evaluate the HDMI signal
quality based on HDMI 2.0 specication
and provide a result, PASS or NG.
Please notice that during testing, device will NOT take any
commands from buttons except ENTER.
Pressing ENTER continuously for 5 seconds will
terminate the evaluation process.
Page 9
Aug, 2018 Copyright © 2018 by SIIG, Inc. All rights reserved.
Support
For more info or tech support
http://www.siig.com/support
Re-
sult
Requirement
Performance Criteria:
According to HDMI 2.0 specification, the
performance criteria is shown ad the
following table.
Please be advised that the test result is based on
the cable connection and the signal integrity of
both input and output from device.
The indicator is usually a good reference for
cable quality, but any other source or display in
consideration plays an important role in the nal
stability of the HDMI 2.0 connection.
Page 10
HDMI 2.0 4K HDR
Installation Gear
User Manual
04-1146A
P/N: CE-H23P11-S1
Loading...