SIIG CE-H23J11-S1 User Manual

HDMI 2.0 4-Display

Video Wall Processor

User Manual

04-1141A P/N: CE-H23J11-S1

2

Safety and Notice

The HDMI 2.0 4-Display Video Wall Processor has been tested for

conformance to safety regulations and requirements, and has been

certified for international use. However, like all electronic equipment,

the HDMI 2.0 4-Display Video Wall Processor should be used with

care. Please read and follow the safety instructions to protect yourself

from possible injury and to minimize the risk of damage to the unit.

• Follow all instructions and warnings marked on this unit.

• Do not attempt to service this unit yourself, except where

explained in this manual.

• Provide proper ventilation and air circulation and do not use near

water.

• Keep objects that might damage the device and assure that the

placement of this unit is on a stable surface.

• Use only the power adapter and power cords and connection

cables designed for this unit.

• Do not use liquid or aerosol cleaners to clean this unit.

• Always unplug the power to the device before cleaning.

Thank You

for your purchase!

3

Features

• DisplayPort 1.2a & HDMI 2.0a compliant

• HDCP compliant

• Four HDMI outputs from 640x480 to 1920x1200

• Supports HDMI and DisplayPort input from 640x480 to 4K2K@60

(YUV 4:4:4), interlaced or progressive

• Image parameters and layouts are automatically saved in ash

memory of the device and can be recalled for later use

• Several image parameters and layouts can be saved in computers

and can be loaded for later use

• Firmware upgradable for new features and technology

enhancements

• The video wall processor can control by USB, push button,Ethernet,

IR remote control and cloud control

• Cloud support is thru an encrypted communication to provide the

best private protection when using device

• Resize, position, zoom for each HDMI output video

• User-selectable output settings, up to 1920x1200

• Supports remote control to switch 1x1, 2x2, 1x3 rotate, and 1x4

rotate mode

• Supports independent input rotation at the resolution up to 1080p

• 4K2K60 (YUV 4:4:4) can be divided and displayed onto four 1080p60

TV (2x2 layout only)

• Supports individual propagation delay on each display to have the

best visual perception

Package contents

• HDMI 2.0 4-Display Video Wall Processor

• Power adapter DC 12V / 1A

• IR Remote control

• Rack-mounting ear set

• User Manual

4

SPECIFICATIONS

Technical

Role of usage Video Wall Processor

HDCP compliance Yes

Video bandwidth

Input – Single link 600MHz [18Gbps]

Output –Single-link 225MHz [6.75Gbps]

Video support

Input - 4K2K@60 (4:2:2 8bits) / 4K2K@60 (4:4:4 8bits)

Output – 1920x1080@60 / 1920x1200@60

Video Format Support HDMI / DisplayPort

Audio support PCM 2ch

ESD protection

Human body model — ±15kV [air-gap discharge]

& ±8kV [contact discharge]

Input 1x HDMI + 1x DisplayPort + 1x USB + 1xRJ45

Output 4x HDMI + 1x Stereo

Control IR remote control / Ethernet / USB / Front Panel / Cloud Control

Input TMDS signal 1.2 Volts [peak-to-peak]

HDMI connector Type A [19-pin female]

Mini-USB connector Type A

RJ-45 connector WE/SS 8P8C

Mechanical

Enclosure Metal case

Dimensions

(L x W x H)

Model 290 x 180 x 44mm [11.4" x 7" x 1.7"]

Package 376 x 240 x 112mm [1'2" x 9.4" x 4.4"]

Carton 590 x 510 x 405mm [1'9" x 1'7" x 1'3"]

Weight

Model 1427g [3.2lbs]

Package 2077g [4.6lbs]

Fixedness 1U rack-mount with ears and Wall hanging holes

Power supply 12V DC

Power Consumption 12W

Operation temperature 0~40°C [32~104°F]

Storage temperature -20~60°C [-4~140°F]

Relative humidity 20~90% RH [no condensation]

5

Layout

Front Panel

1. LED indicator:

PWR – Power indicator LED

LOCK – When device status is locked, it will shine

4K – If source resolution is 4K, the LED indicator will shine

Source – When source from HDMI, the LED indicator will shine

Source from DisplayPort, the LED indicator will blink

2. IR SENSOR: IR sensor for receiving the IR commands from IR remote

3. Control buttons:

Button 1 (Source) – Source setting (HDMI or DisplayPort)

Button 2 (LOCK) – Press button for 3 seconds will enable/disable device locked

Button 3 (2x2) – Fast switch to 1x1 and 2x2

Button 4 (+90°) – Fast switch to 3x1 90° and 4x1 90°

Button 5 (-90°) – Fast switch to 3x1 -90° and 4x1 -90°

Button 6 (Preset 1)

Button 7 (Preset 2)

6

Rear Panel

SUPPORTED RESOLUTION

Input resolution Output resolution

720x480@60Hz
720x576@50Hz

1280x720@60Hz
1920x1080@30Hz
1920x1080@60Hz

4K2K@30Hz
4K2K@60Hz (4:2:2 8bits)
4K2K@60Hz (4:4:4 8bits)

640x480@60Hz
720x480@60Hz
720x576@60Hz

800x600@60Hz
1024x768@60Hz
1280x720@60Hz
1280x768@60Hz
1280x960@60Hz

1280x1024@60Hz

1366x768@60Hz
1440x900@60Hz

1600x1200@60Hz
1680x1050@60Hz
1920x1080@60Hz
1920x1200@60Hz

4. Power Switch: Power ON/OFF switch

5. +12V DC: 12V DC power jack

6. Dip Switch: On for normal use

Off for F/W upgrade

7. USB virtual COM

8. Ethernet: Ethernet control port

9. Stereo audio output – L

10. Stereo audio output – R

11. HDMI INPUT

12. DisplayPort INPUT

13. Output 1-4: HDMI outputs

7

Application

Operation Approach

Method A: Software Operation

System Requirement and Precautions

1. Whenever power o HDMI 2.0 4-Display Video Wall Processor,

please stay unpowered at least 5 to 10 seconds to allow power

capacitors to discharge.

2. The HDMI 2.0 4-Display Video Wall Processor provides software

control program which runs under Microsoft Windows 7, 8.1, 10

through the interface of USB virtual com control.

3. Before you click on the icon of the software, make sure you have

secured the connection between your computer USB port and

the HDMI 2.0 4-Display Video Wall Processor.

8

Start the software control program

Executing the control software, the following dialog will pop up. It

has two ways to control the HDMI 2.0 4-Display Video Wall Processor

device (under Microsoft Windows 7, please run as administrator).

1. USB Connection: Use USB to connect the port on device and

computer. Select correct virtual COM port and click the OK button.

2. Ethernet Connection: Enter the device IP address and click the

OK button.

After the software control setting is accomplished, it will enter

directly to the control interface.

9

1. Connection Status:

Show the connect information and status. If you use USB control

Mode to connect device, the graph is . For IP control, the

graph of Ethernet is

2. Quick Selection:

*Quick Selection function is not available when the input resolution is 4K2K@60Hz

In this part, you can set up the screen resolution, screen coordinate and

split screen. Firstly, you should select the TV picture and you can set up the

corresponding function. The dierent colors of frame represent the dierent

output TVs. The information of coordinate shows the position of output TV.

We also provides 8 preset spaces to save the frequently used scenarios into

the device

Rotation: *only at input is 1080p resolution

Use the software for independent rotation for each input. You can

select clockwise or counterclockwise to rotate the screen.

10

Output Selection and Resolution:

(1)Step 1: check input resolution and choose output resolution

Set the output resolution. You can choose the design display icon

to select the output port and setup resolution. When setting the

dierent resolution, the coordinate of output will also be changed.

In this part, you also can select input source (HDMI or DisplayPort)

or lock/unlock the device.

*Note that when you select the Synchronize function, all windows need to

be set up at the same resolution, otherwise the output will be abnormal.

*If you lock the device, only factory reset function can work.

(2) Step 2: output setting

It has three modes to set up the output TV resolution, position, size

and split screen. The details of dierent mode are described in step

2-1, 2-2 and 2-3.

*Note that when you want to change to another mode, you need to go back to the step 2.

1.Quick Selection 2.From le 3.Custom dene

11

(3) Step 2-1: quick selection

If you choose the Quick Selection mode in step 2, this window will

automatically pop up. In this mode, you can select default screen

split and rotate screen (rotate screen only at 1080p resolution).

3x1: This mode will divide the screen into 3 parts and rotate the

gure. The remaining part shows the full screen.

4x1: The mode will divide the screen into 4 parts and rotate the

gure.

When select the 3x1 or 4x1 mode, the picture in the right part of

control interface will show a red circle. You can slide this white

circle to resize the output screen. In addition, you also can input the

number to adjust the coordinate.

*4k2k60 (YUV 4:4:4) only can be displayed as an 2x2 layout (1080p60 for each output)

(4) Step 2-2: conguration from le

You can load and read conguration from the existing le on your

PC/laptop.

12

(5) Step 2-3: custom dene

In Custom dene mode, you can dene how to cut in both directions

and the part you want to show on output TV. If you want to know

or estimate which parts you select, you can click the Grid button to

show grid on the graph. After the setting, please click the “SAVE AS“

button. Besides, you also can click the “SAVE AS“ button to save the

conguration for future usage. You can adjust the output position by

setting coordinates.

(6) Step 3: adjust image

Zoom In/Out: You can change pixel size from the edge of image by

clicking “+“ and “-“ button (the edge of image has four directions).

After adjusting the image, the rest of this image will be auto-scaled

to fulll the screen.

Horizontal shift/ Vertical shift: You can arbitrarily move the image on

each screen in horizontal direction or vertical direction. Move one

pixel at a time.

13

3. EDID (Extended Display Identication Data)

4. Advanced Setting

14

5. 4K2K Setting

When input is 4K2K@60Hz Resolution, the output display will be

forced to 2x2 layout (other layout cannot set) and only can set up

the output position. We also provide 8 preset spaces to save the

frequently used scenarios into the device.

6. Cloud setting-Association Code

Clicking “ASSC“ button to get an “association code”. The device can

use this code to pair with a cloud server. After a successful pairing,

you can reset cloud.

*Please pair device to cloud within 2 minutes when you get an association code.

15

7. IP Congure

You can also use the Ethernet to control the software program. First,

you should click the “IP CONFIGURE“ button to setup network. Next,

read the Ethernet setting from your device and manually set to the

device or click the DHCP button to automatically get the IP address.

After the step of IP conguration, please restart the machine.

8. Info

Read the software and rmware version.

9. Refresh

This function can not only refresh the information of the setting but

also reconnect this device. You can click “REFRESH“ button to update

the control connection. A “ReConnectForm” window will pop up for

you to select the approach to connect this device.

16

Method B: Firmware Update through mini-USB Port

1. Please ensure the le of new rmware le is in the root directory

of USB Flash Drive. The le name should be “rmware.bin”.

2. Use mini-USB to female USB type A cable to connect the USB

interface of device and USB Flash Drive.

3. Switch dip switch on F/W mode.

4. Power cycle the device and it will automatically start the FW

update process (The process will take about 10 seconds).

Method C: Control through "intriCloud" on Internet

Create Account

The first time to use the intriCloud service, please create a new account.

1. Access intriCloud (www.intri.cloud) and click “Create new account”.

2. The Registration page will pop up and please ll in your email and

password information to create your private account.

17

Add Device to intriCloud

1. Firstly, please make sure the device is connected to the Ethernet. Then

please execute the software from the device to get the association code

(Note: the status of software is connected).

2. Access intriCloud ( www.intri.cloud)or download IntriCloud

APP,and then log in your account on the right top corner. Click

Add device to add the device which you just got its association code.

18

3. Enter the Installer Email for online support in the future, and the

Association Code for pairing with your device.

4. After adding the device, the list of device related to your account will

show on the right top corner. You can click the button to switch device

for control.

19

EDID Learning

The EDID learning function is only necessary whenever you encoun-

ter any display on the HDMI output port that cannot play audio and

video properly. Because the HDMI sources and displays may have

various level of capability in playing audio and video, the general

principle is that the source will output the lowest standards in terms

of audio format and video resolutions to be commonly acceptable

among all HDMI displays. In this case, a 720p stereo HDMI signal

output would be probably the safest choice. Nevertheless, the user

can force the matrix to learn the EDID of the lowest capable HDMI

display among others to make sure all displays are capable to play

the HDMI signals normally.

The method on doing EDID learning please refer to the software

operation section.

There are ve embedded default EDIDs as below,

1. Full-HD(1080p@60)-24bit 2D & 2ch

2. HD(1080i 720p@60)-24bit 2D & 2ch

3. 4K2K@60-24bit 2D & 2ch

4. 4K2K@30-3D-PCM2CH

5. 4K2K@60-420-3D-PCM2CH(2ch)

20

Sep, 2018 Copyright © 2018 by SIIG, Inc. All rights reserved.

Support

For more info or tech support

http://www.siig.com/support