SIIG CE-D20012-S1 Quick Installation Manual

Page 1
1
Introducing the DVI to HDMI Mini-Extender
The DVI to HDMI over CAT5e Mini-Extender extends video transmission from a DVI source to an HDMI display over one economical CAT5e/6 cable. This cost effective solution provides the means to transmit high quality digital video over long distances at minimal cost.
DVI v1.1 compliant, single-link DVI
Programmable EDID feature on the DVI-D to RJ-45 (Transmitter) unit
Video bandwidth: 1.65 Gbps
Low power consumption - no power adapter needed
Transmission distances: up to 40m/130 ft @ 720p/ 1080i or 25m/80 ft @ 1080p
Package Contents
DVI Mini-transmitter (TX)
HDMI Mini-receiver (RX)
Quick Installation Guide
Serial Number Sticker
For future product return or exchange, this serial number is required. Please keep it for your reference.
04-0511A
DVI to HDMI over CAT5e Mini-Extender
Quick Installation Guide
Page 2
2
Layout
Figure 1: Layout
DVI In: plug into the DVI video card of your computer
RJ-45 Out: plug in your CAT5e/6 cable, to be linked to the RJ-45 In connector of the receiver (cable not included)
RJ-45 In: plug in your CAT5e/6 cable, to be linked to the RJ-45 Out of the transmitter (cable not included)
HDMI Out: connects to your HDMI display
Hardware Installation
1. Connect your DVI source to the transmitter.
2. Connect your HDMI display to the receiver.
3. Connect your CAT5e/6 cable between the transmitter and receiver. Make sure the cable is securely connected and not lose.
4. Power on all devices and enjoy.
DVI In
RJ-45 In
RJ-45 Out
HDMI Out
Transmitter
Receiver
Page 3
3
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our
web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond.
SIIG offers a 2-year manufacturer warranty with this product. Please see our web site for more warranty details. If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store where you purchased from.
B) If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced.
Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a
request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
Properly pack the product for shipping. All software, cable(s)
and any other accessories that came with the original package must be included.
Clearly write your RMA number on the top of the returned
package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton.
You are responsible for the cost of shipping. Ship the product
to the following address:
SIIG, Inc. 6078 Stewart Avenue Fremont, CA 94538-3152, USA RMA #:
SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at no cost to the customer.
Page 4
DVI to HDMI over CAT5e Mini-Extender is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective companies.
October, 2008 Copyright © 2008 by SIIG, Inc. All rights reserved.
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCIe, PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier one-stop source of upgrades.
SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty. High-quality control standards are evident by the overall ease of installation and compatibility of our products, as well as one of the lowest defective return rates in the industry. SIIG products can be found in computer retail stores, mail order catalogs, through major distributors, system integrators, and VARs in the Americas and the UK, and through e-commerce sites.
PRODUCT NAME
DVI to HDMI over CAT5e Mini-Extender
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc. 6078 Stewart Avenue Fremont, CA 94538-3152, USA Ph: 510-657-8688
Loading...