1
Introduction
The Ergonomic Multi-Angle Tilted Laptop Cooling Pad supports
tri-level height adjustment allowing for ergonomic positioning for a
comfortable reading and typing experience. Air mesh cushion
base provides added support and comfort while on your lap.
Specifications
• Laptop size: Up to 17"
• Fan size: 80mm
• Rated voltage: 5V DC
• Fan speed: 1700RPM (+/-10%)
• Noise level: 20dBA
• Built-in cable length: 1.51ft
• Material: Plastic
(w/ aluminum face plate and air mesh cushion base)
• Color: Black
• Dimensions: 15.75" (W) x 1.69" (H) x 11.81" (D)
• Weight: 2.20 lbs
Package Contents
• Ergonomic Multi-Angle Tilted Laptop Cooling Pad
• User Reference Guide
2
Product Layout
USB powered fan
Rubber riser
Aluminum face plate
Rubber riser
Laptop holder
Figure 1: Front side
Foldable posts
Rubber risers
compartment
USB cable
compartment
Retractable stand
(for laptop or tablet)
Figure 2: Rear side
3
User Instructions
* Using on lap
1. Take the rubber risers out from the bottom compartment.
2. Slip the rubber risers into the track and adjust its position
according to the size of your laptop.
3. Connect the cooling fan's built-in power cable to a USB port
of your laptop for power.
4. Put the laptop with cooling pad on your lap and enjoy.
4
Figure 3
* Using on desktop
1. Adjust the height of the cooling pad:
Open the foldable posts or pull out the retractable stand
Figure 4
The following steps show how to assemble the retractable stand
with the cooling pad:
First step: Align with the arrow and slip into the track. Make sure
it's joined securely.
Second step: Open the retractable stand and insert the position
shaft to the trench.
Figure 5
5
2. Refer to step 1 to 3 on page 4 for details.
3. Put the laptop with cooling pad on the desktop and enjoy
ergonomic viewing angles.
Figure 6
* Tablet stand
The retractable stand can also be used as a tablet stand to hold
your tablet or iPad.
* Open and insert the
position shaft to the trench
6
* Put your tablet or iPad
in place
Technical Support and Warranty
QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at www.siig.com
and click Support. Our online support database is updated daily with new drivers and
solutions. Answers to your questions could be just a few clicks away. You can also submit
questions online and a technical support analyst will promptly respond.
SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for two (2) years from the date of purchase of the product. This warranty is
not transferable and is available only to the original purchaser of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product having
similar features and functionality) the product if defective in materials or workmanship. This
warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store where
you purchased it.
B) If your purchase has passed the store's return policy period, please follow these steps to
have the product repaired or replaced.
Step 1: Submit your RMA request.
Step 2: After obtaining an RMA number, ship the product.
• You are responsible for the cost of shipping to SIIG. Ship the product to the following
address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground in the U.S. and International
Economy outside of the U.S. at no cost to the customer
7
Loading...