SIIG CE-AV1012-S1 Quick Installation Manual

1

AVTuner Plus

Quick Installation Guide

Introducing the AVTuner Plus

The AVTuner Plus is a new generation TV box which you
can use with your CRT, LCD, Plasma or projection
monitor to watch full screen TV and video at very high
resolutions.

Features and Benefits

• 3D Progressive Scan with up to 1280x1024 resolution

• Supports MTS stereo and SAP

• Supports 16:9 wide screen

• Color and picture quality enhancement technologies

• Multiple connections including DVDs, VCRs, DV

camcorders and game consoles

• OSD menus for fast and easy setup

System Requirements

• Antenna, cable, satellite, and other video sources
utilizing S-Video, RCA or Coaxial connections

• VGA/SVGA/XGA/SXGA compatible LCD or CRT
monitor

• Speakers with 3.5mm stereo connector

Package Contents

• AVTuner Plus with remote control and batteries

• Power adapter, VGA extension and 3.5mm stereo

cable

• Quick installation guide

04-0378A

2

Layout

Figure 1: Front Panel

• S-Video In: connects to the S-Video output of any
AV device

• Composite Video In: connects to the video output
of any AV device via RCA connector

• L/R Audio In: connects to the left and right audio
output of any AV device via RCA connectors

• Volume control: press Vol+ to increase and Vol- to
decrease the volume level. Also used to navigate
through the Menu Options (see page 6)

• Channel selection: press Ch+ to go up and Ch- to
go down to the next channel. Also used to select
Menu Options (see page 6)

• Enter: confirms menu settings

• Menu: displays a menu of all possible settings

• Source: switches input sources between: PC, TV

Tuner, Composite Video, S-Video

• Power: power On/Off switch

S-Video
In

Composite
Video In

L/R Audio
In

Vol-

Vol+

Ch- Ch+

Enter Menu

Source

Power

3

Figure 2: Back Panel

• Power connector: power jack for the switching
power adapter

• Monitor: connects to your LCD or CRT monitor

• VGA In: connects to your PC's VGA out

• Speaker: 3.5mm audio output jack for connecting

external speakers

• Line In: connects to your PC's Line-out/speaker
out jack (optional)

• Video Out: composite video RCA jack connects to
the video input jack of any video display source;
active in TV, S-Video and Composite video modes

• Tuner In: input for antenna, Cable or Satellite TV

Remote Control Buttons

• Power: On/Off switch

• Resolution: selects resolution and refresh rate

• Number keys: key-in numbers for channel selection

• Enter: confirms channel selection

• CH RTN: returns to previous channel

• DISP: displays OSD information

• MENU: displays menu settings

Power
connector

Monitor

VGA In

Speaker

Line In

Video Out

Tuner In