Page 1
VGA & Audio Receiver
Quick Installation Guide
Introducing the VGA & Audio Receiver
The VGA & Audio Receiver receives VGA video and stereo
audio transmissions from a transmitter over one
economical CAT5e cable.
Features and Benefits
• Receives VGA video and stereo audio transmission
over one economical CAT5/5e/6 cable
• Support 2-channel stereo audio
• Supports VGA, SVGA, XGA. SXGA and Multi-sync
monitors
• Distance: up to 1080ft (330m) @ 800x600 resolution
• Resolution: up to 1920 x 1200 @ 246ft (75m)
Package Contents
• VGA & Audio Receiver
• Power adapter (5V DC)
• Quick Installation Guide
Serial Number Sticker
For future product return or exchange this serial number
is needed. Please keep it for your reference.
04-0547B
1
Page 2
Layout
Focus
Brightness
VGA Out
Figure 1: Layout
• VGA + Audio Input: plugs into a CAT5e cable from
a VGA & Audio transmitter
• LED (Link, Power): displays link and power
connection
• VGA Out: plugs directly to a VGA monitor
Note: If the monitor doesn't allow this direct
connection, you'll need a VGA gender changing
adapter (not included).
• Speaker Jack: plugs into remote speakers
• Focus: use this knob to adjust the sharpness of the
screen
• Brightness: use to increase or decrease the brightness
of the screen
• Audio: use to select stereo or mono audio modes
Audio
Power Connector
Speaker Jack
VGA + Audio
LED
Input
2
Page 3
Hardware Installation
Use high quality CAT5e/6 cable to ensure the best possible
display quality up to the maximum supported distance.
1. Connect one end of a CAT5e/6 cable to the VGA +
Audio Input and the other end to an RJ45 port on
the transmitter.
2. Connect the VGA Out to your VGA display.
3. Connect your speakers to the Speaker Jack.
4. Insert one end of the power adapter into the Power
Connector, then plug the other end into a reliable
power source. Power on all devices.
Important: This VGA & Audio Receiver only works
with the following SIIG Transmitters:
- 8-Port VGA & Audio Transmitter (CE-VG0221-S1)
-4-Port VGA & Audio Transmitter (not released)
- VGA & Audio Transmitter from CE-VG0112-S1 kit
3
Page 4
Operating Settings
This section describes how to adjust the VGA & Audio
Receiver for the best audio and video viewing experience.
Audio Switch
• Stereo: 2 channel stereo sound
• Mono: normal sound
Brightness Knob
Turn this knob to increase or decrease the brightness of the
screen.
Focus Knob
Turn this knob to adjust the sharpness of the screen.
4
Page 5
Blank Page
5
Page 6
Blank Page
6
Page 7
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web
site at www.siig.com and click Support. Our online support database is
updated daily with new drivers and solutions. Answers to your questions
could be just a few clicks away. You can also submit questions online and a
technical support analysts will promptly respond.
SIIG offers a 3-year manufacturer warranty with this product. Please see our
web site for more warranty details. If you encounter any problems with this
product, please follow the procedures below.
If it is within the store's return policy period, please return the product to the
store where you purchased from. If your purchase has passed the store's
return policy period, please follow these steps to have the product repaired or
replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then Request a Product Replacement
to submit a request to
defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came
with the original package must be included.
• Clearly write your RMA number on the top of the returned package.
SIIG will refuse to accept any shipping package, and will not be
responsible for a product returned without an RMA number posted
on the outside of the shipping carton.
• You are responsible for the cost of shipping. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
SIIG RMA. If the product is determined to be
7
Page 8
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O
connectivity products, including PCI & ISA serial and parallel ports, USB, Serial
ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards,
and other accessories. SIIG is the premier one-stop source of upgrades.
SIIG products offer comprehensive user manuals, many user-friendly features,
and are backed by an extensive manufacturer warranty. High-quality control
standards are evident by the overall ease of installation and compatibility of
our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs,
through major distributors, system integrators, and VARs in the Americas and
the UK, and through e-commerce sites.
PRODUCT NAME
VGA & Audio Receiver
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Ph: 510-657-8688
VGA & Audio Receiver is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarks of SIIG, Inc. Other names used in this publication are for identification only and
may be trademarks of their respective companies.
March, 2012 Copyright © 2012 by SIIG, Inc. All rights reserved.
Loading...