1
65W USB-C PD Charger
Power Delivery with
QC3.0 Wall Charger
User Reference Guide
04-1115A
Introduction
The 65W USB-C PD Charger Power Delivery with
QC3.0 Wall Charger simultaneously charges up
to 2 USB powered devices to optimize charging
efficiency.
Package Contents
• 65W USB-C PD Charger Power Delivery
with QC3.0 Wall Charger
• Type-C to Type-C cable - 1M
• User reference guide
Key Features and Benefits
• USB-C port with Power Delivery (PD)
outputs power up to 60W, fast charges
MacBook, MacBook Pro, MacBook Air,
iPhone 8/8 Plus /X and more
• QC 3.0 port charges 4X faster than
conventional ports and achieves up to
70% battery charge in as little as 30
minutes through QC supported devices
• Multiple safety features to protect from
over-charging, over-heating and
excessive current
2
Layout
Figure 1: Layout
Specifications
• Foldable AC Plug: Plug it into a reliable
power outlet for power source
• USB-C PD Port : Connect USB-C devices
here for charging by USB-C cable
• QC 3.0 Port : Connect USB devices here
for charging by USB cable
Foldable AC plug
USB-C PD Port
AC Input AC 100-240V, 50/60Hz
Output
USB-C PD port: 5V/3A, 9V/3A,
12V/3A, 15V/3A, 20V/3A
QC 3.0 port: 3.6V-6.5V/3A,
6.5V-9V/2A, 9V-12V/1.5A (Max)
Total power output 65W
Dimensions 2.73" (W) x 2.73" (H) x1.23 " (D)
Weight 0.41lbs
QC 3.0 Port
3
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site
at www.siig.com and click Support. Our online support database is updated
daily with new drivers and solutions. Answers to your questions could be just
a few clicks away. You can also submit questions online and a technical
support analyst will promptly respond.
SIIG offers a 1-year manufacturer warranty with this product. This warranty
covers the original purchaser and guarantees the product to be free of any
defects in materials or workmanship for one (1) year from the date of purchase
of the product. This warranty is not transferable and is available only to the
original purchaser of the product.
SIIG will, at our discretion, repair or replace (with an identical product or
product having similar features and functionality) the product if defective in
materials or workmanship. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state. Please see
our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures
below.
A) If it is within the store's return policy period, please return the product to
the store where you purchased from.
B) If your purchase has passed the store's return policy period, please follow
the steps below to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A
PRODUCTREPLACEMENT to submit a request to SIIG RMA or fax a
request to 510-657-5962. Your RMA request will be processed, if the
product is determined to be defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came
with the original package must be included
• Include a copy of your original sales receipt inside the package
with date of purchase and place of purchase circled and clearly
visible
• Clearly write your RMA number on the top of the returned
package. SIIG will refuse to accept any shipping package, and will
not be responsible for a product returned without an RMA number
posted on the outside of the shipping carton
• You are responsible for the cost of shipping to SIIG. Ship the
product to the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground in the
U.S. and International Economy outside of the U.S. at no cost to the
customer
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebook systems and external peripherals. SIIG continues to grow by
adding A/V and Digital Signage connectivity solutions to our extensive
portfolio.
SIIG products offer comprehensive user manuals, many user-friendly features,
and are backed by an extensive manufacturer warranty. High quality
control standards are evident by the overall ease of installation and
compatibility of our products, as well as one of the lowest defective return
rates in the industry. SIIG products can be found in computer retail stores,
mail order catalogs, through major distributors, system integrators, and
VARs in the Americas and the UK, and through e-commerce sites.
65W USB-C PD Charger Power Delivery with QC3.0 Wall Charger is a
trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG,
Inc. All other names used in this publication are for identification only and may
be trademarks of their respective owners.
December,2017 Copyright ©22017by SIIG,Inc.All rights reserved.
PRODUCT NAME
65W USB-C PD Charger Power Delivery with QC3.0 Wall Charger
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
Loading...