SIIG 4x2 HDMI Quick Installation Manual
1
4x2 HDMI Matrix Switch
with 3DTV Support
Quick Installation Guide
04-0755A
Introduction
The 4x2 HDMI Matrix Switch with 3DTV Support
allows any four HDMI sources to be displayed on
any two displays and routes high definition video
in multiple resolutions up to 1080p plus multichannel audio.
Key Features and Benefits
• HDMI and HDCP compliant
• Support 1080p with 3DTV support
• Support standard, DSD and HD (HBR)
audio
Package Contents
• 4x2 HDMI Matrix Switch with 3DTV
support
• Power adapter
• IR remote control & 4 rubber pads
• Quick installation guide
2
Layout
Figure 1: Front Panel Layout
• Select 1: Select input source 1, 2, 3 or 4 with
Output 1 or press for 3 seconds to turn off
Output 1
• Select 2: Select input source 1, 2, 3 or 4 with
Output 2 or press for 3 seconds to turn off
Output 2
• Output 1 LED: Shows which input source
is selected for output 1
• Output 2 LED: Shows which input source
is selected for output 2
• IR Receiver: Receives signal from IR Remote
Select 2
Output 2 LED
IR Receiver
Output 1 LED
Select 1
3
USB port
Power jack
HDMI Out 1
HDMI Out 2
HDMI In
HDMI In 2
HDMI In 3
HDMI In 4
S/PDIF Out
Figure 2 Rear Panel Layout
• USB port: For firmware update only
• Power jack: Connects to the included power
adapter
• HDMI Output (1-2): Connects to your
HDMI displays via HDMI cables (cables not
included)
• HDMI Input (1-4): Connects to your HDMI
source's HDMI output via HDMI cables
(cables not included)
• S/PDIF out: Extracts audio signal from
HDMI output 1
Loading...