Page 1
1
1x4 HDMI 1.3 Distribution
Amplifier
Quick Installation Guide
04-0557A
Introducing the 1x4 HDMI
The1x4 HDMI 1.3 Distribution Amplifier provides the most
cost effective and advanced HDMI 1.3 splitter solution on
the market, by which the high definition video and high
quality audio can be transmitted to 4 different locations
without losing quality.
Features and Benefits
• HDMI 1.3c and HDCP 1.2 compliant
• DVI 1.1 compliant
• Supports Deep Color and xvYCC color space
• Video bandwidth: 6.75 Gbps (single-link 225MHz)
• Frequency range: 25MHz – 225MHz
• Audio support: DTS-HD Master Audio, Dolby
TrueHD, Dolby Digital, DTS, DVD-Audio, LPCM,
SACD, MPCM
• Input TMDS signal: 1.2V (peak-to-peak)
• Input DDC signal: 5V (peak-to-peak)
Package Contents
• 1x4 HDMI 1.3 Distribution Amplifier
• Power adapter (5V, 2A)
• Quick Installation Guide
Page 2
• HDMI In: HDMI input source
• HDMI Out: Distributed HDMI outputs
• USB In: For firmware update use only
• Power Indicator: When power on, the LED will
blink
• DC In: 5V 2A
Note: When the connected HDMI equipped monitor
is verified as HDMI and HDCP compliant, the
corresponding green LED will blink.
Hardware Installation
Broadcasts HDMI signal to 4 HDMI displays
1. Switch off all devices, including monitors.
2. Connect the LCD(s) to the HDMI Out(s).
3. Connect an HDMI source (such as a Blu-ray Disc
player) to the HDMI In.
4. Plug in 5V DC power supply.
5. Power on the HDMI monitors.
6. Power on the HDMI source.
Layout
Figure 1: Back Layout
HDMI In
HDMI Out
USB In
Power Indicator
DC In
Page 3
3
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our
web site at www.siig.com and click Support. Our online support
database is updated daily with new drivers and solutions. Answers
to your questions could be just a few clicks away. You can also submit
questions online and a technical support analysts will promptly
respond.
SIIG offers a 3-year manufacturer warranty with this product. Please
see our web site for more warranty details. If you encounter any
problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the
product to the store where you purchased from.
B) If your purchase has passed the store's return policy period, please
follow these steps to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to submit a
request to SIIG RMA. If the product is determined to be
defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All software, cable(s)
and any other accessories that came with the original package
must be included.
• Clearly write your RMA number on the top of the returned
package. SIIG will refuse to accept any shipping package, and
will not be responsible for a product returned without an
RMA number posted on the outside of the shipping carton.
• You are responsible for the cost of shipping. Ship the product
to the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
Page 4
1x4 HDMI 1.3 Distribution Amplifer is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be
trademarks of their respective companies.
June, 2009 Copyright © 2009 by SIIG, Inc. All rights reserved.
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer
of I/O connectivity products, including PCIe, PCI & ISA serial and
parallel ports, USB, Serial ATA & UltraATA controllers, FireWire
(1394a/b), networking, sound cards, and other accessories. SIIG is the
premier one-stop source of upgrades.
SIIG products offer comprehensive user manuals, many user-friendly
features, and are backed by an extensive manufacturer warranty.
High-quality control standards are evident by the overall ease of
installation and compatibility of our products, as well as one of the
lowest defective return rates in the industry. SIIG products can be
found in computer retail stores, mail order catalogs, through major
distributors, system integrators, and VARs in the Americas and the
UK, and through e-commerce sites.
PRODUCT NAME
1x4 HMDI 1.3 Distribution Amplifier
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
Loading...