SIIG 16556380 User Manual

Download

Page 1

VGA Splitter

Quick Installation Guide

Introduction the VGA Splitter

The VGA Splitter allows you to distribute content from a single source to multiple VGA displays simultaneously

Features and Benefits

• Supports VGA, SVGA, XGA, UXGA and Multi-Sync monitors

• Supports up to 1920 x 1440 resolution

• Video bandwidth: 250MHz

• Distance: up to 50M (164ft)

• Operating temperature: 0 – 40 °C

• Storage temperature: -5 – 70 °C

• Humidity: 0 – 80 RH, Non-condensing

• Connectors:

- Input: 1x VGA (male, 15-pin)

- Output:

- 1x2 VGA Splitter model : 2x VGA (female, 15-pin)

- 1x4 VGA Splitter model : 4x VGA (female, 15-pin)

- 1x8 VGA Splitter model : 8x VGA (female, 15-pin)

Package Contents

• VGA Splitter

• Power adapter

• Quick installation guide

04-0667A

Page 2

Layout

The 1x2 VGA Splitter's image is shown below. The 4-port and 8-port models come with 4 and 8 outputs, respectively.

On/Off switch

PC (input)

Power adapter jack

Figure 1: Rear Panel

Note: To daisy chain, connect the MONITOR port

of the first splitter to the PC port of the next splitter.

MONITOR (output)

Hardware Installation

1. Power off the computer and monitors you plan to connect to this splitter.

2. Connect your computer’s VGA out to the splitter’s PC connector using a VGA cable (not included).

3. Connect your VGA monitors to the splitter’s MONITOR connectors using VGA cables (not included).

4. Connect the splitter’s power adapter.

5. Turn on the monitors, then computer.

6. The VGA Splitter is now ready to use.

Page 3

Technical Support and Warranty

QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond.

SIIG offers a 3-year manufacturer warranty with this product. This warranty covers the original purchaser and guarantees the product to be free of any defects in materials or workmanship for the life of the product.

SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please see our web site for more warranty details.

If you encounter any problems with this product, please follow the procedures below.

A) If it is within the store's return policy period, please return the product to the store where you purchased it.

B) If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced.

Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to

5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued.

Step 2: After obtaining an RMA number, ship the product.

• Properly pack the product for shipping. All software, cable(s) and

any other accessories that came with the original package must be included.

• Clearly write your RMA number on the top of the returned package.

SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton.

• You are responsible for the cost of shipping to SIIG. Ship the product

to the following address:

SIIG, Inc. 6078 Stewart Avenue Fremont, CA 94538-3152, USA RMA #:

• SIIG will ship the repaired or replaced product via Ground in the U.S.

and International Economy outside of the U.S. at no cost to the customer.

SIIG RMA or fax a request to 510-657-

Page 4

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio. All centered around the distribution and switching of A/V signals over CAT5/6, these products include matrix switches, distribution amplifiers, extenders, converters, splitters, cabling, and more. SIIG is the premier one-stop source of upgrades and is committed to providing high quality products while keeping economical and competitive prices. High-quality control standards are evident by one of the lowest defective return rates in the industry. Our products offer comprehensive user manuals, user-friendly features, and most products are backed by a lifetime warranty. SIIG products can be found in many computer retail stores, mail order catalogs, and e-commerce sites in the Americas, as well as through major distributors, system integrators, and VARs.

PRODUCT NAME

VGA Splitter

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc. 6078 Stewart Avenue Fremont, CA 94538-3152, USA Phone: 510-657-8688

VGA Splitter is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective companies.