SIIG 104-0561C User Manual

USB 2.0 Video Capture Device
Quick Installation Guide

Features and Benefits

• USB 2.0 Plug and Play

• Supports External A/V/S-video inputs

• Supports VCD/DVD/SVCD authoring

System Requirements

• PC computer with an available USB 2.0
port and soundcard

• Windows

®

7 (32-/64-bit) / Vista (32-/64-

bit) / XP (32-/64-bit)

Serial Number Sticker

For future product return or exchange, this serial
number is required.

Do not use this serial

number for the software Product Key.

The instructions on how to find the software
Product Key is on page 11.

04-0561C

1

Package Contents

• USB 2.0 Video Capture Device

• USB extension cable

• Software CD

• Quick installation guide

Layout

USB connector

S-Video

Figure 1: Layout

Note: When using the S-Video

connection, you must also connect Audio
L/R to hear the sound.

2

Audio L/R

Video In

Driver Installation

Windows 7 (32-/64-bit) / Vista (32-/64-bit)

1. Boot up Windows. At the Windows desktop
insert the software CD.

At the AutoPlay box: Click Open folder to
view files. Double click Setup.

If the AutoPlay box doesn't start: Click Start
button, in Start Search, type D:\setup.exe,
then press Enter. (Change D: to match your
CD/DVD-ROM drive letter)

2. Click Yes or Allow.

3. Choose your Language, then click Next.

4. At Ready to install, click Install

5. At Windows Security, click Install.

6. At Install Shield Wizard Complete, click
Finish.

7. Insert the USB 2.0 Video Capture Device into
an available USB port and the driver will
install automatically.

8. Go to Honestech VHS to DVD Installation
and install the software utility.

3

Windows XP (32-bit)

1. Boot up Windows. Insert the USB 2.0 Video
Capture Device into an available USB port.

2. At the Found New Hardware Wizard.

For XP SP2 or later: Click No, not this time,
then click Next.

For XP SP1 or earlier: Go directly to step 3.

3. Check Install from a list or specific

location, click Next. Insert the software
CD.

4. Check Include this location in the search,

uncheck the other box, type in D:\XP32,
then click Next. (Change D: to match your
CD-ROM drive letter)

5. Click Continue Anyway, then click Finish.

6. Repeat steps 2-5 to complete the driver

installation.

7. Go to Honestech VHS to DVD Installation

and install the software utility.

Windows XP (64-bit)

1. Boot up Windows. Insert the USB 2.0 Video

Capture Device into an available USB port.

4