1x4 HDMI Splitter with
3D and 4Kx2K
Quick Installation Guide
Introduction
The 1x4 HDMI Splitter with 3D and 4Kx2K
broadcasts HDMI signals from one source to four
HDMI displays.
Key Features and Benefits
• Broadcasts HDMI signals up to 4Kx2K
resolution to four displays simultaneously
• HDMI and HDCP compliant
• Supports HDMI Deep Color & full 3D
• Wide frequency range: 25MHz~340MHz
• Video bandwidth: 10.2 Gbps
• Supports 1080p and up to 4Kx2K PC
resolution
• Supports Auto EDID function
• Supports input transmission distance up to
5M, and output transmission distance up to
15M
04-0841A
Package Contents
• 1x4 HDMI Splitter with 3D and 4Kx2K
• Power adapter
• Housing rubber pad (4)
• Quick installation guide
Layout
Reset
DC 5V
HDMI Input
LED
Figure 1 Front Panel
Update
• DC 5V: Power adapter jack for the included
5V power adapter
• LED: Power LED indicator
• HDMI Input: Connects to your HDMI source
• Update: For future firmware updates
• Reset: Press here for default settings
2
HDMI Out
Figure 2 Rear Panel
• HDMI Out (1-4): Connects to your HDMI
displays
Hardware Installation
1. Power off all devices you plan to connect to
this splitter.
2. Connect your HDMI source's HDMI out to
the splitter's HDMI Input using an HDMI
cable (HDMI cable not included).
3. Connect your monitors to the splitter’s
HDMI Outputs using HDMI cables (HDMI
cable not included).
4. Connect the included power adapter to the
splitter's power jack and plug it into a
reliable power outlet.
3
5. Power on all of the connected devices.
6. The splitter is now ready to use.
Application
HDMI source (DVD
player, PS3,etc)
Power input
HDMI cable (up
to 5m)
HDMI cable (up
to 15m)
HDMI display
HDMI display
HDMI display
HDMI display
Figure 3 Application
4
Blank Page
5
Blank Page
6
Technical Support and Warranty
QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with
new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analyst will promptly
respond.
SIIG offers a 3-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for three (3) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT
to submit a request to
will be processed, if the product is determined to be defective, an RMA number will
be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came with the
original package must be included.
• Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping
carton.
• You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.
SIIG RMA or fax a request to 510-657-5962. Your RMA request
7
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebook systems and external peripherals. SIIG continues to grow by adding
A/V and Digital Signage connectivity solutions to our extensive portfolio.
SIIG products offer comprehensive user manuals, many user-friendly features,
and are backed by an extensive manufacturer warranty. High quality control
standards are evident by the overall ease of installation and compatibility of
our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs,
through major distributors, system integrators, and VARs in the Americas and
the UK, and through e-commerce sites.
PRODUCT NAME
1x4 HDMI Splitter with 3D and 4Kx2K
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
1x4 HDMI Splitter with 3D and 4Kx2K is a trademark of SIIG, Inc. SIIG and the SIIG logo
are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of
Microsoft Corporation. All other names used in this publication are for identification only
and may be trademarks of their respective owners.
November, 2012 Copyright © 2012 by SIIG, Inc. All rights reserved.
Loading...