USB 2.0 Smart Card Reader
Quick Installation Guide
Introduction
The USB 2.0 Smart Card Reader is portable, and is
widely used with USB equipped PC or Mac
desktops or notebooks.
Key Features and Benefits
• Compliant with all major smart cards and
industry standards
• Power and activity LED indicator
• USB bus-powered and plug-n-play
Package Contents
• USB 2.0 Smart Card Reader
• Driver CD & Quick installation guide
System Requirements
• PC or Mac desktop or notebook with an
available USB port
• Windows
• Mac
®
2000 SP4 or later
®
OS X v10.6 or later
04-0837A
1
Layout
USB connector
Figure 1: Layout
• Power LED: steady blue light means power on
• Activity LED: pink light means smart card is detected
Power and Activity LED indicators
Smart card
slot
Driver Installation
For 2000 and XP, follow the steps below to install
the driver. For other Windows and Mac OSes, the
driver is embedded, just plug the reader into a
USB port and the driver will load automatically.
1. Plug the card reader to an available USB
port. Click Cancel at the Found New
Hardware (if prompted).
2. Insert the driver CD. Double click RSKIT_
100618_AllinOne in the driver CD.
3. Wait while the driver installs, then click
Finish to complete the installation.
2
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with
new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analyst will promptly
respond.
SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for two (2) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request
will be processed, if the product is determined to be defective, an RMA number will
be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came with the
original package must be included.
• Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping
carton.
• You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.
3
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebook systems and external peripherals. SIIG continues to grow by adding
A/V and Digital Signage connectivity solutions to our extensive portfolio.
SIIG products offer comprehensive user manuals, many user-friendly features,
and are backed by an extensive manufacturer warranty. High quality control
standards are evident by the overall ease of installation and compatibility of
our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs,
through major distributors, system integrators, and VARs in the Americas and
the UK, and through e-commerce sites.
PRODUCT NAME
USB 2.0 Smart Card Reader
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERA TING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
USB 2.0 Smart Card Reader is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft
Corporation. All other names used in this publication are for identification only and may be
trademarks of their respective owners.
November, 2012 Copyright © 2012 by SIIG, Inc. All rights reserved.
Loading...