SIIG 04-0832A User Manual

USB 3.0 & 2.0 Hub with
Gigabit Ethernet and 5V/
4A Adapter
Quick Installation Guide

Introduction

The USB 3.0 & 2.0 Hub with Gigabit Ethernet and
5V/4A Adapter provides 6 additional USB 3.0 &

2.0 ports and a Gigabit Ethernet port to your PC
or MAC system.

Key Features and Benefits

• Provides 2 USB 3.0, 4 USB 2.0 ports and a
Gigabit 10/100/1000Mb/s Ethernet port

• Compliant with Universal Serial Bus 3.0
Specification & IEEE 802.3, 802.3u, and

802.3ab compatible

• Supports SuperSpeed USB 3.0 data transfer
rate up to 5Gb/s and backward compatible
with USB 2.0 & USB 1.1 devices

• 5V/4A adapter for power hungry USB
devices

04-0832A

1

System Requirements

• Desktop or notebook PC with an available
USB port (USB 3.0 recommended)

• Windows

®

8 (32-/64-bit) / 7 (32-/64-bit) /
Vista (32-/64-bit) / XP (32-/64-bit) / Server
2008 & 2003 (32-/64-bit) / Server 2008 R2

• MAC OS 10.6.x or later

Package Contents

• USB 3.0 & 2.0 Hub with Gigabit Ethernet and
5V/4A Adapter

• USB 3.0 cable (Type A/B)

• Power adapter

• Driver CD & Quick installation guide

Layout

Power LED

USB 2.0 downstream

ports (Type-A)

Figure 1: Front Layout

2

Ethernet port

Power adapter jack

USB 3.0 downstream

ports (Type-A)

Figure 2: Rear Layout

USB 3.0 Connectors

Type-A connector Type-B connector

Figure 3: USB 3.0 Connectors

Upstream port

(Root port, Type-B)

3

Hard ware Installation

Important: The USB 3.0 & 2.0 Hub with Gigabit
Ethernet and 5V/4A Adapter only works at USB

3.0 speed when connected to a USB 3.0 host

controller. Otherwise it will work as a USB 2.0 or
USB 1.1 hub when connected to USB 2.0 or USB

1.1 host controller, respectively.

1. Connect the Type-B connector of the
included USB 3.0 cable to the Upstream

port (Root Port, Type-B) of the USB 3.0 &

2.0 Hub with Gigabit Ethernet and 5V/4A
Adapter.

2. Connect the Switching power adapter into
the Power adapter jack of the hub, then
plug the power adapter into a reliable power
source.

3. Follow the instructions in the Driver
Installation section to install the driver.

4. After finishing driver installation, plug the

Type-A connector of the included USB 3.0
cable into an available USB port.

5. Restart the computer to complete the
installation.

4