SIIG 04-0698B User Manual

USB 3.0 Multi Card Reader
Quick Installation Guide

Introduction

The USB 3.0 Multi Card Reader is the perfect
choice for computer users looking for a flash
memory card reader/writer that's easy to carry
and supports multi-format flash memory cards.

Key Features and Benefits

• Supports SuperSpeed USB 3.0 data transfer
rate up to 5Gb/s

• Compliant with Universal Serial Bus 3.0
Specification

• Supports SDXC and MSXC up to 2TB

System Requirements

• Notebook or desktop PC with an available
USB port (USB 3.0 recommended)

• Windows
Vista (32-/64-bit) / XP (32-/64-bit) / Server
2003 & 2008 (32-/64-bit) / Server 2008 R2

®

8 (32-/64-bit) / 7 (32-/64-bit) /

04-0698B

1

Package Contents

• USB 3.0 Multi Card Reader

• USB 3.0 cable

• Quick installation guide

Layout

Memory Stick

CF / MD

Power / Activity LED

microSD / miniSD / MS Micro (M2)

Figure 1: Front Layout

USB cable connector

Figure 2: Back Layout

2

SD / MMC

xD

LED Activity

• Power LED (Blue)

• Activity LED (Red)

Note: The activity LED will also lit up
when a memory card is inserted. It flashes
when accessed.

Installation

Important: The USB 3.0 Multi Card Reader only
works at USB 3.0 speed when connected to a USB

3.0 controller. Otherwise it will work as a USB

2.0 or USB 1.1 card reader when connected to
USB 2.0 or USB 1.1 controller respectively.

In order for the USB 3.0 Multi Card Reader to
work as a USB 3.0 card reader, the driver for your
existing USB 3.0 host controller has to be properly
installed. This card reader will automatically be
detected and installed when connected to the
USB 3.0 port.

1. Connect one end of the USB cable to the
card reader.

2. Connect the other end to a USB port of the
computer.

3