SIIG 04-0668C User Manual

1x2 Compact VGA Splitter

Installation Guide

Introduction

The 1x2 Compact VGA Splitter allows you to
distribute content from a single source to two
VGA monitors simultaneously.

Features and Benefits

• Supports VGA, SVGA, XGA, UXGA
and Multi-Sync monitors

• Supports up to 1920 x 1440 resolution

• Video bandwidth: 300MHz

• Distance: up to 50M (164ft)

Layout

Monitor ports

Figure 1: Layout

04-0668C

1

Package Contents

• 1x2 Compact VGA Splitter

• Installation guide

Hardware Installation

1. Power off the computer and monitors
you plan to connect to this splitter.

2. Connect the splitter's VGA cable to the
computer's VGA port.

3. Connect the splitter’s USB cable to the
computer's USB port for power.

4. Connect your VGA monitors to the
splitter's MONITOR ports using VGA
cables (not included).

5. Turn on the monitors, then computer.

6. The 1x2 Compact VGA Splitter is now
ready to use.

Note: To daisy chain, connect the
Monitor port of the first splitter to the
PC port of the next splitter.

2