SIIG 04-0638E User Manual

USB 2.0 to VGA Pro

Quick Installation Guide

Introduction

The USB 2.0 to VGA Pro allows you to connect a
monitor, LCD or projector to your desktop or
notebook PC as an extended desktop or an
additional display for your main screen.

Key Features and Benefits

• Quickly adds a monitor, LCD or projector
to your USB 2.0 or later enabled system

• Works with standard and wide screen
monitors

• Resolution (max): 1600 x 1200 @ 32-bit color
depth for standard and 1920 x 1080 @ 32-bit
for widescreen monitors

System Requirements

• Desktop or notebook PC with an available
USB 2.0/3.0 port

®

• Windows
Vista (32-/64-bit) / XP SP3 (32-bit)

8 (32-/64-bit) / 7 (32-/64-bit) /

04-0638E

1

• MAC OS

®

10.4 or later (Intel-based Apple

computers only)

Package Contents

• USB 2.0 to VGA Pro

• USB Cable (Type A to B)

• Driver CD & quick installation guide

Layout

USB port

VGA port

Figure 1: USB 2.0 to VGA Pro Layout

Windows Software Installation

Make sure the proper driver for your graphics
card is installed, the USB 2.0 to VGA Pro is not
designed to work with Windows' Standard VGA

Graphics Adapter driver.
Important: Do not plug the USB 2.0 to VGA Pro

into the computer until instructed to do so.

2

1. Insert the driver CD, close CD autoplay
window if prompted.

2. Press Windows key and R, type D:\Setup.
exe in the Run window, then click OK.

(Change D: to match your CD/DVD-ROM
drive letter)

3. Click Yes or Allow at the User Account
Control. Skip this step if not prompted.

4. Click I Accept.

5. Connect your second monitor to the USB

2.0 to VGA Pro and turn it on, then plug the
USB 2.0 to VGA Pro into the computer.

6. Restart the computer.

To Verify Windows Installation

1. Go to Device Manager to verify installation.
For Window 8 / Windows 7 / Windows XP:

Right click Computer or My Computer,
click Manage, then click Device Manager.

For Windows Vista: Right click Computer,
click Manage, click Continue, then click
Device Manager.

3

2. Double click USB Display Adapters, a VGA
Display Adapter should be displayed.

Uninstalling the Adapter Driver

Windows 8 / Windows 7

1. For Windows 8, double click Control Panel
on desktop. For Windows 7, click Start,
Control Panel.

2. Click Programs, then click Programs and
Features.

3. Select DisplayLink Graphics, then click
Uninstall.

4. Click Yes, Yes, then click OK.

5. Click Yes to complete the uninstallation.

Windows Vista

1. Click Start, Control Panel.

2. Click Classic View, double click Programs
and Features.

3. Select DisplayLink Graphics, then click
Uninstall, then click Yes.

4. Click Allow, then click Yes to complete
uninstalling the driver.

4

Windows XP

1. Click Start, Control Panel.

2. Double click Add/Remove Programs.

3. Select DisplayLink Graphics, click
Remove, then click Yes.

4. Click Yes to complete uninstalling the driver.

Windows Display Utility

After successful driver installation a VGA Display
Adapter utility icon will appear in the taskbar.

This display utility allows you to quickly change
the viewing modes and resolutions. Access the
utility by clicking the icon.

Viewing Modes

• Screen Resolution: Displays a list of
available resolutions.

• Screen Rotation:

Normal - No rotation is applied.
Rotated Left - Rotates the extended or

mirrored display by 270 degrees.
Rotated Right - Rotates the extended or

mirrored display by 90 degrees.

5