Signi Fires Frame User Manual

1

Frame User Manual

2

Operating Manual

Thank you for purchasing this Signi Fires product. Signi Fires is very safety conscious, we
have taken every care in designing, manufacturing and assembling your Signi Fires Frame
to ensure it operates effectively, efficiently and safely. In return we ask that you exercise
care when using and installing this product and follow the instructions provided. Please
make sure that you have read and understand the Signi Fires Slimline Burner Manual that
you received with the Slimline Burner itself before attempting to install this product. Before
using your Signi Fires Frame, please read all the information contained in this operation
manual carefully. When using this fireplace, basic precautions should always be followed,
including but not limited to the following.

Read all instructions and warnings before using this fireplace.

WARNING

 DO NOT OVERFILL THE BURNER’S INTENDED CAPACITY.
 DO NOT INSTALL INTO AN AREA WHERE THERE IS A DRAFT WHICH CAN AFFECT THE FLAME.

ESPECIALLY WHEN INSTALLING IN OLD HEARTHS, MAKE SURE HEARTH IS SEALED.

 USE ONLY THE FUEL FOR WHICH THE SLIMLINE BURNER IS INTENDED.
 DO NOT TOUCH THE EXTERIOR OF THE SLIMLINE BURNER DURING OR AFTER BURNING.
 PARTS OF THIS SLIMLINE BURNER CAN REACH HIGH TEMPERATURES.
 DO NOT HAVE COMBUSTIBLE OBJECTS IN CLOSE PROXIMITY TO THE BURNER.
 NEVER POSITION THE FRAME WITHIN RANGE OF COMBUSTIBLE ITEMS THAT CAN BE

MOVED/BUMPED BY ACCIDENT, OR BLOWN BY THE WIND. e.g CURTAINS & BLANKETS

 ONLY USE THE FRAME IN AREAS WITH GOOD VENTILATION.
 DO NOT COVER THE FRAME VENT WITH ANY DECORATIVE ITEMS WHETHER THEY ARE

COMBUSTIBLE OR NON COMBUSTIBLE

 DO NOT INSTALL THE FRAME ONTO COMBUSTIBLE MATERIAL SUCH AS WOODEN WALLS

AND OTHER FLAMMABLE MATERIALS.

CAUTION

 Make sure you have read and understood this manual before using this product.
 Do not overfill or spill fuel when refilling.
 If fuel is spilled, wipe with a dry cloth and allow the rest to evaporate before introducing

a flame to the burner.

 If the burner is accidentally overfilled, follow the steps given in these next pages.
 To refill, wait until the burner is at the room temperature after the flame has been turned

off. NOTE: the flame may not be visible to the naked eye in daylight.

 Never refill over or near an open flame.
 Use the supplied funnel or pump to refill.
 Remove all plastic & packaging before using the burner.

3

CONTENT OF PACKAGING:

 Hanger Bracket - qty 1 (wall screws/fixings not supplied)
 Wall Box - qty 1
 Burner Tray - qty 1
 Fascia - qty 1 (Separately packaged)
 Safety Clips - qty 2
 Installation Manual - qty 1

NOTE: Signi Fires does not supply the wall fixings for the Hanger Bracket to be fitted to the
wall because these fixings may need to vary depending on the material that the wall is
made of. Please consult your local building regulations or hardware specialist if you are
unsure.

4

1 - Product Specifications & Sizes

Wall

Overall Product Sizes & Weights:

Product

name

A = Fascia

Length

B = Wall Box

Length

C = Fascia

Opening

D = MM

From Wall

E = Wall

Box Depth

Weight

Excluding

Burner

* Weight

Including

Full Burner

Frame 1150

1150mm

900mm

800mm

170mm

134mm

28,5kg

43,25kg

Frame 1450

1450mm

1200mm

1100mm

195mm

159mm

35,5kg

62,25kg

Frame 1750

1750mm

1500mm

1400mm

195mm

159mm

42,0kg

77,25kg

* Please note the weight of the Frame including the Slimline Burner indicated here is the weight of the burner
once filled with fuel. Be sure that the fixings used will compensate for at least this plus, 25% to be safe.

Materials - Powder coated & painted steel, Stainless Steel
Applications - Indoor Only
Compatible Burners - Signi Fires Slimline Burner Range