35
+44 (0) 1733 456789 www.creda-heating.co.uk
Model Reference Rating Product description Height A Width B Width C
CSP2 75 775201 2kW Sunplus outdoor patio heater 159mm 594mm 144mm
CSQAD 85 822084 Sunquartz autodriver PIR
Sunplus
Outdoor patio heaters
Product Selector
Sunplus heaters give instant heat,
are quick to install and only require
minimal maintenance, contrasting gas
patio heaters, which also have bulky and
costly gas bottles to deal with. Sunplus
heaters give heat at the flick of a switch
and heat like the sun. The radiant heat
passes through the air and heats solid
objects making it highly efficient wherever
it’s installed, making them the ideal
outdoor heating solution.
The heaters transmit harmless infra-red
radiant energy, like the sun, that turns into
heat only when it comes into contact with
a solid object such as people.
So you’re not heating the atmosphere or
having the heat blown away in the wind -
unlike outdoor gas heaters.
Key features
• Low running costs as Radiant heat heats solid
objects not the air
• Instant heat cuts the cost of outdoor heating overall
• Silent running with no moving parts or noisy
naked flames
• Low capital cost as these heaters allow you to
select fewer heaters, but place them exactly where
the heating need is
• When used with PIR sensors, further energy
savings are available
Gold finish halogen lamp
The gold quartz halogen lamp fitted to
the Sunplus runs at up to 2,200°C
and offers extended performance and
15% greater transmission.
Control options
Sunquartz autodriver
Ref: 85 822084
• Element - 2kW gold quartz halogen lamp
• Finish - high quality aluminium case in silver
• Reflector - high performance polished reflector
• Fitted guard included
• IP rating - IP24 (splashproof)
• Supply - 230/240V AC single phase
Technical Specification
“
The new Sunplus outdoor
heater provides a safe,
efficient and easy answer for
outdoor heating.
”
Dimensions
Commercial
space heating
Model Reference Rating Number of lamps Height A Width B Depth C
CSQ1.5 75 771801 1.5kW 1 185mm 390mm 115mm
CSQ2.0 75 771802 2kW 1 185mm 390mm 115mm
CSQ3.0 75 771803 3kW 2 370mm 390mm 115mm
CSQ4.0 75 771804 4kW 2 370mm 390mm 115mm
CSQ4.5 75 771806 4.5kW 3 555mm 390mm 115mm
CSQ6.0 75 771807 6kW 3 555mm 390mm 115mm
CSQAD 85 822084 Sunquartz autodriver PIR
Sunquartz
Shortwave infra-red radiant heaters
Product Selector
Their uses are endless, from warehouses
to churches. These efficient sun-like
heaters can penetrate damp air with
minimum heat loss to the atmosphere.
Key features
• Up to 90% efficient at converting electricity
into energy
• Instant sensation of heat with visible glow at
switch on
• Absolutely silent in operation
• Long range heat projection
• Modular design
• Lightweight and silent
• Fitted with wire guard for safety
• 1 and 2 lamp units are suitable for a 230-240V
single phase supply
• 3 lamp units are supplied wired for single phase
supply but can be connected to a 380-415 volt
3 phase supply
Control options
PIR automatic controller senses movement
detected within its range and automatically
switch on the heater which will remain
switched on for a preset time.
The unit is suitable for 500W-6,000W
single phase operation. Soft start circuitry
is incorporated to reduce the inrush
current, allowing cables and fusegear to
be rated as for resistive loads and
extending lamp life.
The PIR range is adjustable and a
temperature hold-off facility will inhibit
operation when ambient temperatures
exceed a value selected between 10°C
and 20°C.
Sunquartz autodriver
Ref: 85 822084
• Tungsten halogen lamps, 230/240V with ruby red
quartz outer sleeve
• Reflectors bright rolled, specular 99.8%
aluminium, electro-chemically brightened
• Electro zinc coated steel casing
• High pressure die cast aluminium end castings
• Epoxy polyester powder paint finish white/grey
• Supply - 230/240V AC single phase (3 lamp units
can be connected to a 380/415V 3 phase supply)
Technical Specification
“
Instant heat right where
it’s needed. Sunquartz
short wave infra-red
heaters warm people,
not the air.
”
Dimensions
Commercial
space heating
36
+44 (0) 1733 456789 www.creda-heating.co.uk
Model Reference Rating Height A Width B Depth C
CCR2 75 771701 2kW 340mm 376mm 140mm
CCR3 75 771702 3kW 340mm 376mm 140mm
CCR45 75 771703 4.5kW 440mm 376mm 140mm
Ceramic Emitters
Long wave infra-red heaters
Product Selector
Dimensions
These heaters incorporate dual ceramic
emitters to rapidly convert electrical
energy into heat energy without
producing light.
With no moving parts, these heaters are
virtually maintenance-free.
Key features
• Durable ceramic emitters which rapidly convert
electrical energy into heat energy
• Available in 2, 3 and 4.5kW versions
• No fans or moving components, so no dust
contamination to the environment
• Low maintenance
• Good vibration resistance
• Fitted with wire safety guards
• Robust fitting brackets
• Ideal for commercial and industrial
application where glare free heat is required
• Element - ceramic emitter
• Grey painted steel casing
• Supply - 230/240V AC single phase
“
Long wave infra-red heaters
offer highly efficient, silent,
space heating.
”
Technical Specification
A
C
B
Ceiling Ceiling
Floor Floor
Wall
Wall
Heating index Applications 2kW 3kW 4.5kW
130-150W/m
2
Shops, meeting halls 7.2m
2
12.0m
2
18.8m
2
150-170W/m
2
Offices, canteens 6.8m
2
11.3m
2
17.7m
2
170-200W/m
2
Workshops, garages 6.0m
2
10.0m
2
15.7m
2
220-240W/m
2
Churches 4.7m
2
7.8m
2
12.3m
2
Rating Height A Height B Height C
2kW 1800 300 200
3kW 2500 300 300
4.5kW 3000 500 500
Area of coverage at minimum mounting height
Commercial
space heating
37
+44 (0) 1733 456789 www.creda-heating.co.uk
Model Reference Rating Height A Width B Depth C
CSL2 75 771601 2kW 108mm 1,215mm 71mm
CSL3 75 771602 3kW 108mm 1,671mm 71mm
Sunslim
Commercial radiant heaters
Product Selector
The Sunslim can be wall-mounted or
ceiling hung.
Key features
• Instant, directional radiant heat
• Available in 2kW and 3kW versions
• Completely silent in operation
• Lightweight and robust
• Corrosion resistant
• Suitable for bracket or chain mounting
• Easy to install
• Ideal for localised heating in large covered
areas such as factories and workshops
“
Sunslim is a low cost,
robust and easy to install
radiant heater. Its tilt
mounting allows heat to be
localised, or directed to a
general area.
”
• Element - ‘black heat’ type
• Zinc coated steel body/matt black end caps
• Chrome plated steel guards
• Anodised aluminium reflector
• Supply - 230/240V AC single phase
• Minimum mounting height 2 metres
• 300mm minimum clearance above the heater
• 500mm minimum clearance on either side
• Installation notes: High temperature cable must
be used. We recommend the use of a residual
current device (RCD)
Dimensions
Technical Specification
0.3
0.1
2.0
2.0
0.5
Sunslim - Minimum
mounting distances
(metres)
Sunslim heated area
Heating index 3kW 2kW
HL WH L W
10 4.0 5.24 5.49 3.3 4.11 4.53
12 3.6 4.88 4.94 3.0 3.84 4.12
14 3.2 4.51 4.39 2.7 3.57 3.70
16 3.5 4.33 4.12 2.5 3.38 3.43
18 2.8 4.14 3.84 - - -
H = mounting height (determined by on-site requirements) L = length of the heated area W = width of the heated area
Commercial
space heating
38
+44 (0) 1733 456789 www.creda-heating.co.uk
Model Reference Guard short code* Rating Diameter A Length B Depth C
CST1 75 771501 STG1 60 Watts 52mm 410mm 75mm
CST2 75 771502 STG2 120 Watts 52mm 670mm 75mm
CST3 75 771503 STG3 180 Watts 52mm 980mm 75mm
CST4 75 771504 STG4 240 Watts 52mm 1,280mm 75mm
CST5 75 771505 STG5 300 Watts 52mm 1,590mm 75mm
CST6 75 771506 STG6 360 Watts 52mm 1,890mm 75mm
CSIK 85 731506 Interlinking kit
Suntube
Tubular heaters
Product Selector
They are highly effective as window
demisters and for horticultural use,
providing invaluable, effective heating and
frost protection in greenhouses and
conservatories.
Key features
• 60-360W outputs
• A range of 6 lengths and loadings
• Complete with universal mounting brackets
for floor or wall fixing and 1m white cable
Optional accessories
Interlinking kit
Available for multiple installations
(100mm mounting centres).
Ref: 85 731506
STG guards*
We recommend the use of guards
for additional security in sensitive
areas such as schools, hospitals and
care homes.
These can be obtained from C.Ainao Ltd.
Tel: 020 7987 1184
• Elements metal sheathed throughout
• Polyester epoxy powder coated aluminium body
• High temperature glass filled nylon end caps
and brackets
• Supply - 230/240V AC single phase
Technical Specification
“
Suntubes are the perfect
answer where a steady
energy efficient source of
heat is needed, providing
gentle background warmth
and frost protection for
both domestic and
commercial applications.
”
Dimensions
Commercial
space heating
39
+44 (0) 1733 456789 www.creda-heating.co.uk
Model Reference Rating Noise level @3m Height A Width B Depth C
CSF3 75 771401 3kW 40.5dBA 229mm 267mm 260mm
CDCS 82 815906 Dual control switch
Sunfan
High level fan heater
Product Selector
Key features
• High air volume throughput of 300m3/hour
• Quiet running, totally enclosed motor
• Wall mounted with 2 part self supporting bracket
• Multi-directional adjustment of 45° vertically
and 150° horizontally with single screw locking
• High level heating/cooling - ideal for shops
and warehouses where wall space is at a premium
• Double insulated
• Supplied complete with variable thermostatic
controller
Thermostatic controller (included)
For remote switching on/off and variable
thermostatic control.
Control options
For remote switching on/off and
hot/cold air circulation.
Dual control switch (optional)
Ref: 82 815906
• Flame retardant polycarbonate/glass filled
nylon body
• Single phase, 4 pole motor
• Two tone grey (neutral colours)
• Protection - Two thermal cut-outs
• Supply - 230/240V AC single phase
• Minimum mounting height 1.8 metres
• 150mm minimum clearance above the heater
• 300mm minimum clearance on either side
Technical Specification
“
Sunfan is a robust 3kW
high volume air throughput
commercial/industrial wall
mounted fan heater
designed to provide highly
efficient heating in winter,
or cool air circulation
in summer.
”
Dimensions
Commercial
space heating
40
+44 (0) 1733 456789 www.creda-heating.co.uk
When mounted on the inside of an
external door they create a ‘hot air curtain’
to prevent cold draughts entering a
building. In summer they can be switched
to fan only to form a barrier against
incoming dust and provide a refreshing
breeze. Suitable for a range of doorway
applications in commercial premises such
as shops, offices, workshops and stores,
the Sunscreen and Sunspot heaters are
designed for fast installation with key
hole-slots for vertical mounting or
brackets providing complete flexibility of
adjustment from vertical to horizontal.
Easily accessible switches allow the option
to run the unit on fan only or at half or full
heat output.
Key features
• Two heat settings or cold
• High volume throughput
• Smooth running, shaded pole motor, with
‘greased-for-life’ bearings
• Integral switching for ease of installation
• Tangential blower
Sunspot 2.25kW
The Sunspot is a modular unit almost
half the width of the Sunscreen.
It can be used with a Sunscreen for
wider doorways or on its own as a high
level wall-mounted fan heater in
commercial premises.
• Element - open coil supported by
ceramic insulators
• Zinc coated steel, powder coated body
white/grey
• Shaded pole motor
• Protection - thermal safety cut-out
• Supply - 230/240V AC single phase
• Can be fixed directly to the wall using the key
slot holes provided or angled using the
brackets provided
• Mounting directly above the door at a height of
between 1.8 and 2.25m
Model Reference Rating Height A Width B Depth C
CSS3 50 813976 3kW 185mm 610mm 105mm
CSS45 50 813977 4.5kW 185mm 610mm 105mm
CSS225 50 813975 2.25kW 185mm 350mm 105mm
Wall Mount Ceiling Mount
Sunscreen
Warm air curtains
Product Selector
Dimensions
“
Sunscreen and Sunspot
heaters provide the ideal
solution for draught exclusion
on external doors.
”
Technical Specification
Commercial
space heating
41
+44 (0) 1733 456789 www.creda-heating.co.uk
Loading...