Bluetooth Speaker
M24
ACTIVE MONITORS
USER MANUAL
Contents
M24
ACTIVE MONITORS
02 CONTENTS
03 SAFETY
04 INFORMATION
05 FRONT-AND REARPANEL
06 REMOTE CONTROL
07 CONNECTING YOUR SPEAKERS
BLUETOOTH FUNCTION
08 USB charge
09 PHONO
10 CONNECT TV,DVD,CONSOLE,PC
11 LIMITED WARRANTY
12 SPECIFICATIONS
2
Congratulations on your new M24 ACTIVE MONITORS.
Please take a moment to read this manual.
Safety
Safety Instructions
M24
ACTIVE MONITORS
Enjoy
Please store this instruction manual for
future reference.
●Do not use this product near water or
moisture.Clean only with a dry cloth.
Unplug this product from the wall outlet
before cleaning.
●Place the unit on a solid surface.Do not
block any ventilation openings.
●Do not put it in a closed bookcase or a
cabinet that may keep air from flowing
through its ventilation openings.
●Do not install near any heat sources,
such as radiators,heat registers,stoves
or other appliances that produce heat.
●Protect the power cord from being
walked on or pinched,particularly at
plugs and the point where they exit
from the product.
●Servicing is required when the product
has been damaged.Do not attempt to
service this product yourself.Opening
or removing covers may expose you to
dangerous voltages or other hazards.
Please contact the manufacturer to be
referred to an authorized service center
near you.
●To prevent risk of fire or electric
shock,avoid over loading wall outlets,
extension cords,or integral convenience
receptacles.
●Do not let objects or liquids enter the
product.
●Use proper power sources.Plug the
product into a proper power source,as
described in the operating instructions
or as marked on the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3
M24
ACTIVE MONITORS
Information
Unpacking
These speakers were carefully tested and inspected during production and before
packaging and shipping.After unpacking please check for any damage.It is rare
that a unit is damaged during shipping,but if this does happen contact your retailer
immediately.
We recommend that you keep the original carton and packing material for future
shipping.
RecommendedSpeakerSetup
Correct speaker placement has a huge impact on sound quality.There are many
different theories,but all rooms and tastes are different so it's impossible to specify
a correct placement.We do suggest you experiment with a few different locations see
what is best for you.
For the best bass response on,we recommend that you keep a minimum
distance of 20-25 cm between the speakers and the rear wall.For height,position
the speakers with the tweeters at eye level of your most common listening position.
SpeakerConditioningandBreak in -
Although a break-in period is not required,we recommend that you play between
24 to 48 hours of music through the speakers before doing any critical listening or
speaker placement.
SpeakerCleaning
We don't recommend using any solvents or cleaners on cabinets or speaker
driveunits.Just wipe down with a soft,dry cloth.
4
Front-and rearpanel
M24
ACTIVE MONITORS
7
1
1. REMOTE RECEIVE WINDOW
>Red: standby or Auto-Standby
(after 30 minutes without playing)
>Blinking RED: mute
>White:ON
>Blue: Bluetooth source is connected
>Blinking Blue: Bluetooth source is disconnected
2. Increase / Decrease Volume / input select
3. Aux in
For right / left RCA stereo plugs,
from CD / DVD / Home Theater player1．
Phono(Phono / Line)
4. Phono(Phono / Line)
3
4
2
5
8
9
10
11
6
6. Power On / Off
7. Optical audio in
8. USB Audio In (for PC connection only)
9. Ground Screw Terminal
10. Portable music device charge socket
(DC 5V/1A)
11. Power supply input
12. Left speaker output
Signal output, for connecting the
left passive LN 01 speaker
12
5.SUB out
5
Remote control
M24
ACTIVE MONITORS
1
2
3
4
5
6
Aux
7
+
8
BassFlatTreble
-
1. Standby
2. Bluetooth input
3. Volume button
Press"+", then volume will increase;
4. Prev track
5. Volume button
Press"-", then volume will decrease;
6. RCA input mode
7. Reset
Reset bass and treble.
9
10
11
Opt
USB
12
13
+
14
-
9. Mute button
10. Next track
11. Play/pause
12. USB(PC Use)
13. Digital in
Optical in
14. Treble button
Press"-", then treble will decrease;
Press"+", then treble will increase;
8. Bass button
Press"-", then bass will decrease;
Press"+", then bass will increase;
6
M24
ACTIVE MONITORS
Connecting your speakers
STEP1
Connect the RED(+) and BLACK(-) terminals from the left speaker to the corresponding
terminals on the right speaker using the included speaker cable.Insulation on cable must
be stripped on all ends.
Note:Because this system is self-powered,do not connect the speaker terminals to the
speaker outputs of a stereo receiver.
STEP2
Connect the power cord into the left speaker and the other end into the wall outet.
Bluetooth function
Pairing Bluetooth device and M24:
If you have a Bluetooth fuction audio device, such as phone, music palyer, computer .
and connect it with M24, you should pairing them as below :
1,power on M24 and select Bluetooth on Bluetooth fuction andio device.
Waiting for a few seconds, let devices go into working condition.
2, Select Bluetooth input option by remote control ,white indicator light will turn
on and flash . Or please make sure if Bluetooth connect with M24. And shut
off other Bluetooth device.
7
M24
ACTIVE MONITORS
3,Please use your Bluetooth device search new Bluetooth device ,if get “M24”,
connection it.if need pairing code, entry “1234” or “0000”.
4,If pairing successfully, white light “always on”, pairing finished .
5,The same Bluetooth device work again ,no need pairing one more time, M24
will auto connect with the device pairing last time .
Operation Bluetooth function
1,Connect your Bluetooth device as above ways.
2,Select Bluetooth input mode by remote control ,and you also can press volume
knob, and choose Bluetooth input mode .If it on Bluetooth input mode ,white light will on .
3,if your Bluetooth device support AVRCP agreement, you can use your remote
control to select “PLAY/PAUSE /PREV / NEXT”.
USB charge
8
PHONO
Peachtree M24.
Peachtree M24.
Peachtree M24 remote.
M24
ACTIVE MONITORS
9
M24
ACTIVE MONITORS
Connect TV,DVD,console,PC
A
AUDIO
L
R
B
PC AUDIO
OUTIN
CONFIGURATION A(TV,DVD,CD-RCA stereo plugs):
Connect the RCA L/R to your TV,DVD etc.and the RCA L/R to the Stereo Input on rear
panel of the M24.
Note that most newer TV remotes can control the M24 active speaker volume
if connected to variable TV audio out.
CONFIGURATIONB (PC):
Connect the mini jack to your PC and the RCA L/R to the Stereo Input on rear
panel of the M24.
10
LimitedWarranty
Dear Customer,
M24
ACTIVE MONITORS
This product has been designed and manufac-
tured to the highest quality standards,however
if something goes wrong with this product,and
the country distributor warrants free replacement
parts or repair by the official distributor.
This limited warranty is valid for the original ow-
ner for a period of two years from the date of
purchase,it is not transferable.
Whatiscoveredbythelimitedwarranty:
The limited warranty covers all production and
material defects of the product,except for the
damages stated below.
Whatisnotcoveredbythelimitedwarranty:
Damages caused by packing and transport
Defects caused by accidents,misuse,normal
wear and tear,mis-maintenance,voltage va-
riation and overloading.
Damages caused by incorrect installation or
operation Damages caused by modification
or repair by a nonauthorised service centre
and use of non-original spare parts
Other damages due to conditions beyond the su-
pplier's control such as fire,rain,strode of lightn-
ing,war and other force majeure events
Howtoclaimpartsorrepairunderwarranty:
To have your product serviced under warranty,you
must contact the dealer from where you bought the
product.
You will need to produce this warranty booklet
completed and stamped by your dealer on the
date of purchase.Altematively,you sill need the
original sales invoice or other proof of ownership
and date of purchase.
The supplier is liable only to repair or replace
defective parts of products and the supplier is
not responsible for indirect losses or damages
arising from the use of the product.
Transportation costs for servicing are not co-
vered by the warranty.
A service repair or replacement cannot exceed
the value of the product under warranty,in no
event shall the supplier be responsible or liable
for special,incidential,consequential or indirect
damages.
Dealernameandstamp :
Dateofpurchase :
11
M24
ACTIVE MONITORS
Specifications
Tweeter: 1 inch soft-dome
Woofer: 4 inch Aluminium cone
Nominal impedance: 4 Ohm
Sensitivity 2.83V(1W/1M): 85dB
Power Output: 40W x 2
Frequency Response: 60Hz-20KHz
Crossover System: 2-way
Amplifier Type: Class D
Inputs: 1 x RCA&Phono, 1x Optical, 1xUSB, 1x Bluetooth
Outputs: 1xUSB(charge),1xSub Woofer
Amplifier Input Sensitivity: 480mV(Line RCA)
Frequency Range: 20Hz-20KHZ @ +/- 3dB
THD (1W@1KHz): ＜0.1%
Dimensions: 140mm x 190mm x 220mm
Net Weight: 5.7 Kg
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
Loading...