Sifam Tinsley Delta Clip B, CT 1000A, CT 300A, Delta Clip A Operating Manual
Application:
Delta Clip B (300 A / 1000 A) measures
current without interrupting the conductin g line.
They are used for electrically isolated measurement
of alte rnatin g current within a broad range ,without
interrupting the current conducti ng cable and bus
bars.
Safety in acc ordance with IEC 61010-1.
Minimum transformatio n ratio error.
Compact , han dy design.
Perm anently connec ted safety cables.
*
*
*
*
Measurement:
measures AC current
without interrupting the conducting line.
opening contact of both the core which become
visible when trigger is pressed, must be always
kept clean. Even small outside particles can
deviate measuring accuracy. The measuring
secondary long cables with contact- protected
connection plugs, which electrically isolates the
measurement of AC current without interruption.
Operating Manual
Safety Features & Precautions:
Before operating read completely the inst ruction
clamp is not
current transf ormers are
constructe d with safety rules of IEC 61010-1.
When in op eration the saf ety of user and unit is
assu red. Also when the secondary circuit is
interrupted, the Clamp has a Protectio n circuit
which prevents high vol tage to be generated.
manual. These instruction must be followed by
users in all respects. In case of incorrect use or
careless handling, the safety of both user and
- Application around & removal from
HAZARDOUS LIVE conductor is permitted
The
Features of Delta Clip B:
The delta clip
assured.
Delta Clip B for AC current measurement
Delta Clip B
The Delta Clip B
Delta Clip B
accessories for Multi series.
The Delta Clip B 1000A should be used as
Delta Clip B
accessories for Multi 12s which directly
The Delta Clip B 300A should be used as
displays the Current in 300A range.
P eriodic C hec k-u p :
The Delta Clip B does not require any specific maintenance. While cleaning, the
probes must not be immersed into any liquid. No spec ial mainten ance is required for housing.
The surface between the opening jaws should be cleaned with dr
y
use of clea nsers, abrasives or solvents.
Ty pe
C T 100 0A
C T 300A
Descrition/
Appllication
The current transformers are used for electrically isolated
measurement of alternating current within broad range.It is
possible to measure AC current without interrupting the
current conducting cable and bus bars via hard wired leads
with contact protected plugs
.
Nominal Primary
Current
Output signal
Transmission ratio
Input:Output
Accuracy /
max.error
Jaw opening /
Conducto r Diameter
1-1000 A AC
4-300 AAC
1mA AC / A AC
0.3 mA AC / A AC
1000:1
1000:1
Class 1 (2.5 VA)
(for current range from
1A to 1000A, 50Hz)
Class 1 ( 1.25 VA)
(for current range from
4A to 300A, 50Hz)
43mm /
Diameter 43mm
Used with
Frequency range
Dimensions
(W X H X D)
Weight
Cable length
40Hz....1kHz
40Hz....1kHz
Approx 650 gms
Approx 500 gms
1.5 me ter
1.5 mete r
35mm /
Diameter 35mm
( 92 X 39 X 220) m m
(84 X 39 X 202) mm
Max. operatin g
Voltage
CAT III 600 V
as per IEC-61010
CAT III 600 V
as per IEC-61010
S pe c ific ation s :
Delta Clip B
Multi series
Multi 12s
Item Code : 2-60-006-00-00566
Subject to change without notice
Revision - C
Printed In India
cloth before operating. Avoid
Manufactured by:
Sifam Tinsley Instrumentation Inc
3105 Creekside Village Dr,
Unit 801, Kennesaw GA 30144
Distributed by:
Veracious Canada Inc
1101 Britannia Rd E,
Mississauga, ON L4W 3X1
Contact: +1 416-640-5364
Fax: +1 416-981-3933
E-mail: info@veraciousinc.ca
Web: www.veraciousinc.com
Loading...