Siemens Building Technologies SSB Valve Actuator Data Sheet

Siemens Product Guard Warranty
SSB Valve Actuator
24 Vac, 0-10V Control Non-Spring Return
Powermite
MZ Series Globe
SSB61U Electronic Valve Actuator.
Description
The Powermite SSB61U Electronic Valve Actuator requires a 24 Vac supply and receives a 0 to 10 Vdc control signal to proportionally control a valve. This actuator is designed to work with Powermite MZ Series Valves with a 7/32-inch (5.5 mm) stroke and a threaded
valve bonnet that ts the actuator.
Features
• UL-listed for plenum installations
• Direct-coupled for installation without tools
• Close-off up to 70 psi on 1/2-inch valve
• Non-spring return
• Manual override
• Visual position indication
• Orderable as an actuator only or as a complete valve/actuator assembly
Applications
The Powermite SSB61U Electronic Valve Actuator is for use in heating and cooling HVAC applications with Powermite Valves that need 45 lbf. (200 N) of nominal force.
Recommendation:
Use only with the MZ Series valve bodies.
A-131
Valves
Siemens Product Guard PLUS 3 Warranty
www.usa.siemens.com/hvac
SSB61U Specifications
EA0589R2
A-132
Valves
Operating Voltage .....................................24 Vac ±20% or 24 Vdc ±25%
Frequency .................................................................................. 50/60 Hz
Power Supply ....... Earth Ground Isolating, Class 2, 24 Vac Transformer
Power Consumption ...................................................................... 2.0 VA
Control Signal (Y)
Voltage..................................................................................0 to 10 Vdc
Current.........................................................................................0.1 mA
Running Time .................................................................................75 sec.
Nominal Stroke ..................................................................7/32" (5.5 mm)
Nominal Force.....................................................................45 lbf. (200 N)
Agency Approvals ........................................................... UL/cUL, UL873
CSA C22.2 No. 24-93
Dimensions
Valve
Size
in.
1/2"
(15 mm)
3/4"
(20 mm)
1"
(25 mm)
Center Line
to Top of Actuator
1
H
5-1/8"
(130 mm)
5-1/8"
(130 mm)
5-3/8"
(136 mm)
Service
Height
H W
13-1/8"
(330 mm)
13-1/8"
(330 mm)
13-3/8"
(335 mm)
Actual
Width
1
3-1/4"
(83 mm)
3-1/4"
(83 mm)
3-1/4"
(83 mm)
Service
Width
W
11-1/4"
(282 mm)
11-1/4"
(282 mm)
11-1/4"
(282 mm)
Ambient Temperature
Operation........................................................... 34 to 122°F (1 to 50°C)
Transport and Storage ..................................-13 to 158°F (-25 to 70°C)
Ambient Humidity……… .......................... 0 to 90% RH, Non-condensing
Wiring Connection ................................ Terminal Block for Plenum Cable
............................(Accessory Available for 3/8-inch Flex Conduit)
Mounting Location .............................................. NEMA 1 (Interior Only)
SSB61U Product Ordering
Description Part No. Actuator Prex Code
0 to 10 V SSB61U 255
There are no repair parts for this product. Replace the entire actuator if inoperative.
Service height and width are the recommended dimensions to allow access to the product.
3-7/8
(98)
3-1/4
(83)
Dimensions shown in inches (mm).
Accessories & Service Kits
3-1/8
(79)
1-7/8
(48)
A-257
www.usa.siemens.com/hvac
Loading...