Siemens Building Technologies Current Transformers Specifications

Technical Specification Sheet
Dimensions in Inches (cm)
A B C D E
Split-Core Current Transformers
Small, Medium and Large Sizes

Description

Siemens Split-Core Current Transformers (CTs) provide linear output voltage that is directly proportional to the input current. These transformers are safely and easily installed over existing electrical power lines without disconnecting the lines or interrupting service.
Siemens energy monitoring components are used for a variety of applications including building automation, tenant submetering, performance verification, energy management, and new technology assessment. These devices are targeted for use with the Siemens MD Series Power Meters.

Features

Available wit h three window sizes: Small: 0.75” (1.9 cm) Medium: 1.25" (3.2 cm) Large: 2.0" (5.1 cm)
Available in six current ranges: Model Current Range 50A, Small 5 to 65A AC 100A, Small 2 to 130A AC
CT Size Part Number
Small
Medium
Large
Table 1. CT Dimensions.
SCT-SCS-0050-U SCT-SCS-0100-U
SCT-SCM-0100-U SCT-SCM-0200-U SCT-SCM-0400-U SCT-SCM-0600-U
SCT-SCL-0600-U SCT-SCL-1000-U
Document No. 149-406
August 27, 2014
2.0
2.1
5.0
0.6
(1.6)
1.00 (2.5)
1.2
(3.1)
(5.1)
3.25 (8.3)
4.8
(12.1)
(5.4)
3.35 (8.5)
(12.7)
0.75 (1.9)
1.25 (3.2)
2.0
(5.1)
0.75 (1.9)
1.25 (3.2)
2.0
(5.1)
100A, Medium 5 to 130A AC 200A, Medium 4 to 260A AC 400A, Medium 8 to 520A AC 600A, Medium 12 to 780A AC
600A, Large 30 to 780A AC 1000A, Large 20 to 1300A AC
Output: 333 mV at rated current
Page 1 of 2
Siemens Indus try, Inc.
Your feedback is important to us. If you have
Document No. 149-406

Specifications

SCT-SCS-0050-U
SCT-SCS-0100-U
SCT-SCM-0100-U
SCT-SCM-0200-U
SCT-SCM-0400-U1
SCT-SCM-0600-U
SCT-SCL-0600-U2
SCT-SCL-1000-U
Electrical Output Signal 333 mV at rated current
Wire Colors White = (+) Hi, positive Black = (-) Low, neg ative
Frequency Range 50 Hz to 400 Hz Phasing Orientation Arrow points towards load Ratio Error <1% at rated current (typical) Phase Error <2° at rated current (typical)
Mechanical Case Material Epoxy encapsulated housing
Leads 8 feet (2.7 m), twisted pair, 20 AWG Operating temperature Maximum 105°F (220°C) Weight SCS 4.8 oz (136 g)
SCM 12.0 oz (340 g) SCL 26.0 oz (748 g)
Safety Working Voltage 600 Vac, Category III
Dielectric Strength 5000 Vac around case 600 Vac rated leads
Certifications ETL certified to UL Standard 61010-1 cETL certified to CAN/CSA Standard
C22.2 No. 61010-1 CE Conformity CE Low Voltage Directive 2006/95/EC

Ordering Information

Part Number Description
Small Split-Core CT; 0.75” (19 mm) Opening; 50A Small Split-Core CT; 0.75” (19 mm) Opening; 100A Medium Split-Core CT; 1.25” (32 mm) Opening; 100A Medium Split-Core CT; 1.25 (32 mm) Opening; 200A Medium Split-Core CT; 1.25" (32 mm) Opening; 400A Medium Split-Core CT; 1.25” (32 mm) Opening; 600A Large Split-Core CT; 2.00” (51 mm) Opening; 600A Large Split-Core CT; 2.00” (51 mm) Opening; 1000A
1) Included in MD Model Power Meter Kits numbers MD-xxx-3-CTSC-400A.
2) Included in MD Model Power Meter Kits numbers MD-xxx-3-CTSC-600A.
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners. © 2014 Siemens Industry, Inc.
Building Technologies Division 1000 Deerfield Parkway Buffalo Grove, IL 60089-4513 USA +1-847-215-1000
comments about this document, please send them to
sbt_technical.editor.us.sbt@siemens.com
.
Printed in the USA
Page 2 of 2
Loading...