Siemens WM14W790AU User Manual

Washing machine

WM14W790AU

siemens-home.com/welcome

en ,QVWUXFWLRQ0DQXDODQG,QVWDOODWLRQ,QVWUXFWLRQV

ns-home.com/welcome

Register
your
product
online

Your new washing machine

You have chosen a Siemens washing
machine.

Please take a few minutes to read and
become familiar with the advantages of
your washing machine.

To meet the high quality demands
required by Siemens, every washing
machine that leaves our factory is
carefully checked to ensure that it
functions correctly and is in perfect
condition.

For more information on our products,
accessories, replacement parts and
services, see our website www.siemens­home.com or contact our after-sales
service centres.

If the operating and installation
instructions describe different models,
any differences will be pointed out at the
relevant points in the text.

Read these operating and installation
instructions before switching on the
washing machine.

Display rules

: Warning!

This combination of symbol and signal
word indicates a possibly dangerous
situation. Not heeding the warning can
cause death or injuries.

Caution!

This signal word indicates a possibly
dangerous situation. Not heeding the
caution can cause property and/or
environmental damage.

Note/tip

Information about the optimum use of
the appliance/any other useful
information.

1. 2. 3. / a) b) c)

The steps are represented by numbers
or letters.

■ / -

Lists are represented by a small box or
a dash.

2

en

Contents

enInstruction Manual and Installation Instructions

8 Intended use. . . . . . . . . . . . . . . . .4

( Safety instructions . . . . . . . . . . .5

Children/people/pets . . . . . . . . . . . . . 5

Installation. . . . . . . . . . . . . . . . . . . . . . 6

Operation . . . . . . . . . . . . . . . . . . . . . . 9

Cleaning/Maintenance . . . . . . . . . . . 10

7 Environmental protection . . . . .12

Packaging/used appliance . . . . . . . . 12

Tips on economical use . . . . . . . . . . 12

5 Positioning and connecting . . .13

Included with the appliance . . . . . . . 13

Safety instructions. . . . . . . . . . . . . . . 14

Installation surface . . . . . . . . . . . . . . 14

Installation on a base or a

wooden joist floor . . . . . . . . . . . . . . . 14

Installation on a platform with

drawer . . . . . . . . . . . . . . . . . . . . . . . 14

Installing the appliance in a

kitchenette . . . . . . . . . . . . . . . . . . . . 15

Removing the transport locks. . . . . . 15

Hose and cable lengths . . . . . . . . . . 16

Water inlet. . . . . . . . . . . . . . . . . . . . . 17

Water outlet . . . . . . . . . . . . . . . . . . . 18

Levelling . . . . . . . . . . . . . . . . . . . . . . 19

Electrical connection. . . . . . . . . . . . . 20

Before using the appliance for

the first time . . . . . . . . . . . . . . . . . . . 21

Transportation. . . . . . . . . . . . . . . . . . 22

Y Main points in brief . . . . . . . . . .23

* Getting to know the appliance 24

Washing machine . . . . . . . . . . . . . . . 24

Control panel . . . . . . . . . . . . . . . . . . 25

Display panel . . . . . . . . . . . . . . . . . . 26

Z Laundry. . . . . . . . . . . . . . . . . . . .27

Prepare the laundry . . . . . . . . . . . . . 27

Sorting laundry . . . . . . . . . . . . . . . . . 27

C Detergent . . . . . . . . . . . . . . . . . . 28

Correct selection of detergent . . . . . .28

Saving energy and detergent . . . . . .28

/ Overview of programmes . . . . . 29

Programmes on the programme

selector . . . . . . . . . . . . . . . . . . . . . . .29

sensoFresh î . . . . . . . . . . . . . . . . .34

Starching . . . . . . . . . . . . . . . . . . . . . .34

Dyeing/bleaching . . . . . . . . . . . . . . .34

Soaking . . . . . . . . . . . . . . . . . . . . . . .34

0 Programme default settings. . . 35

Temperature . . . . . . . . . . . . . . . . . . .35

Spin speed . . . . . . . . . . . . . . . . . . . .35

Finish in. . . . . . . . . . . . . . . . . . . . . . .35

\ Additional programme

settings. . . . . . . . . . . . . . . . . . . . 36

speedPerfect G . . . . . . . . . . . . . . .36

ecoPerfect ¦. . . . . . . . . . . . . . . . . . .36

Prewash . . . . . . . . . . . . . . . . . . . . . .36

Rinse Plus . . . . . . . . . . . . . . . . . . . . .36

Less Ironing. . . . . . . . . . . . . . . . . . . .36

sensoFresh Intensity . . . . . . . . . . . . .36

1 Operating the appliance . . . . . . 37

Preparing the washing machine . . . .37

Switching on the appliance/

selecting a programme . . . . . . . . . . .37

Placing laundry into the drum . . . . . .37

Measure and add detergent and

care products . . . . . . . . . . . . . . . . . .38

Change the programme default

settings . . . . . . . . . . . . . . . . . . . . . . .39

Select additional programme

settings . . . . . . . . . . . . . . . . . . . . . . .39

Start the programme . . . . . . . . . . . . .39

Child lock . . . . . . . . . . . . . . . . . . . . .39

Adding laundry . . . . . . . . . . . . . . . . .40

Changing the programme . . . . . . . . .40

Cancel the programme . . . . . . . . . . .40

Programme end during rinse hold. . .40

Programme end . . . . . . . . . . . . . . . .41

3

en Intended use

Removing laundry/switching off

the appliance . . . . . . . . . . . . . . . . . . 41

Q Appliance settings . . . . . . . . . . 42

Activating the setting mode . . . . . . . 42

Changing the signal volume . . . . . . 42

Selecting/deselecting the appliance

automatic switch-off . . . . . . . . . . . . . 42

Switching the drum-care information

signal on/off . . . . . . . . . . . . . . . . . . 42

Exiting setting mode . . . . . . . . . . . . 42

H Sensors . . . . . . . . . . . . . . . . . . . 43

Automatic load sensing . . . . . . . . . . 43

Unbalanced load detection system . 43

AquaSensor. . . . . . . . . . . . . . . . . . . 43

2 Cleaning and maintenance . . . 44

Machine housing/control panel . . . . 44

Drum . . . . . . . . . . . . . . . . . . . . . . . . 44

Descaling. . . . . . . . . . . . . . . . . . . . . 44

Detergent drawer and housing . . . . 45

The drain pump is blocked,

emergency draining. . . . . . . . . . . . . 45

The drain hose at the siphon is

blocked . . . . . . . . . . . . . . . . . . . . . . 46

Filter in the water supply blocked . . 46

3 Faults and what to do about

them. . . . . . . . . . . . . . . . . . . . . . 47

Emergency release . . . . . . . . . . . . . 47

Information on the display panel . . . 48
Faults and what to do about them. . 49

4 After-sales service . . . . . . . . . . 51

[ Consumption rates . . . . . . . . . . 52

Energy and water consumption,
programme duration and residual
moisture for the main washing

programmes . . . . . . . . . . . . . . . . . . 52

8 Intended use

Intended use

■ This appliance is intended for private

domestic use only.

■ Do not install or operate this

appliance anywhere that is liable to
experience frost and/or outdoor
conditions. There is a risk that the
appliance will be damaged if
residual water in it freezes. If hoses
freeze up, they may crack/burst.

■ This appliance must only be used for

washing domestic laundry,
consisting of machine-washable
items and hand-washable woollens
(see label on item). Using the
appliance for any other purpose is
outside of the scope of its intended
application and is forbidden.

■ This appliance is suitable for

operation with cold mains water and
commercially available detergents
and care products (must be suitable
for use in washing machines).

■ This appliance is intended for use up

to a maximum height of
4000 metres above sea level.

Before you switch on the appliance:

Check that there is no visible damage to
the appliance. Do not operate the
appliance if it is damaged. Should you
have any problems, please contact your
specialist dealer or our customer
service.

Read and follow the operating and
installation instructions and all other
information provided with this appliance.

Retain the documents for subsequent
use or for subsequent owners.

J Technical data. . . . . . . . . . . . . . 53

Technical data . . . . . . . . . . . . . . . . . 53

Information for test institute . . . . . . . 54

r Aqua-Stop warranty . . . . . . . . . 55

4

Safety instructions en

( Safety instructions

Safety instructions

The following safety information
and warnings are provided to
protect you from injury and to
prevent material damage to
your surroundings.

It is nevertheless important to
take the necessary precautions
and to proceed with care when
installing, maintaining, cleaning
and operating the appliance.

Children/people/pets

:Warning

Risk of death!

Children and other people who
are unable to assess the risks
involved when using the
appliance may injure
themselves or may find
themselves in life-threatening
situations. Therefore please
note:

■ The appliance may be used

by children over the age of 8
years and by persons with
reduced physical, sensory or
mental capacity or by
persons with a lack of
experience or knowledge as
long as they are supervised
or have received instruction
on how to use the appliance
safely and they have
understood the potential
risks of using the appliance.

■ Children must not play with

this appliance.

■ Do not allow children to

clean or maintain this
appliance unsupervised.

■ Keep children under 3 years

and pets away from this
appliance.

■ Do not leave the appliance

unattended when children or
other people who are unable
to assess the risks are in the
vicinity.

:Warning

Risk of death!

Children may lock themselves
inside appliances and find
themselves in a life-threatening
situation.

■ Do not position the

appliance behind a door, as
this may obstruct the
appliance door or prevent it
from opening completely.

■ Once an appliance has

reached the end of its life,
pull the mains plug from the
socket before severing the
mains cable, and then
destroy the lock on the
appliance door.

5

en Safety instructions

:Warning

Risk of suffocation!

If allowed to play with the
packaging/plastic film or
packing components, children
may become caught in these or
pull them over their heads and
suffocate.
Keep packaging, plastic film
and packing components away
from children.

:Warning

Risk of poisoning!

Detergents and care products
may result in poisoning if
consumed.
If accidentally swallowed, seek
medical advice. Keep
detergents and care products
out of the reach of children.

:Warning

Risk of burns!

When washing at high
temperatures, the glass in the
appliance door becomes hot.
Stop children from touching the
appliance door when it is hot.

:Warning

Eye/skin irritation!

Contact with detergents or care
products may cause eye/skin
irritation.
Rinse eyes/skin thoroughly if
they/it come(s) into contact
with detergents or care
products. Keep detergents and
care products out of the reach
of children.

Installation

:Warning

Risk of electric shock/fire/ material damage/damage to the appliance!

If the appliance is not installed
properly, this may lead to a
dangerous situation. Make sure
that:

■ The mains voltage on your

power socket matches the
rated voltage specified on
the appliance (identification
plate). The connected loads
and the required fuse
protection are specified on
the identification plate.

■ The appliance is only

connected to a source of
alternating current via a
nationally recognized and
grounded outlet that has
been correctly installed.

■ The mains plug and the

grounded socket match and
the earthing system has
been correctly installed.

■ The cross section of the

cable is sufficiently large
enough.

■ The mains plug is accessible

at all times.

■ If using a residual current

circuit breaker, only use one
that bears the following
mark: z. The presence of
this mark is the only way to
be sure that it fulfils all the
applicable regulations.

6

Safety instructions en

:Warning

Risk of electric shock/fire/ material damage/damage to the appliance!

If the appliance's mains cable is
altered or damaged, this may
result in electric shock, short
circuiting or fire due to
overheating.
The mains cable must not be
kinked, crushed or altered, and
must not come into contact with
any heat sources.

:Warning

Risk of fire/material damage/ damage to the appliance!

The use of extension cords or
power strips may result in fire
due to overheating or short
circuiting.
Connect the appliance directly
to an earthed socket that has
been correctly installed. Do not
use extension cords, power
strips or multi-way couplers.

:Warning

Risk of injury/material damage/damage to the appliance!

■ The appliance may vibrate or

move when in operation,
potentially resulting in injury
or material damage.
Place the appliance on a
clean, even, solid surface
and, using a spirit level to
guide you, level it with the
screw-in feet.

Risk of injury/material damage/damage to the appliance!

■ If you take hold of any of the

appliance's protruding parts
(e.g. the appliance door) in
order to lift or move it, these
parts may break off and
cause injury.
Do not take hold of any of
the appliance's protruding
parts in order to move the
appliance.

:Warning

Risk of injury!

■ The appliance is very heavy.

Lifting it may result in injury.
Do not lift the appliance on
your own.

Risk of injury!

■ The appliance has sharp

edges on which you could
cut your hands.
Do not take hold of the
appliance by its sharp
edges. Wear protective
gloves to lift it.

Risk of injury!

■ If the hoses and mains

cables are not correctly
routed, they may constitute a
tripping hazard, which may
result in injury.
Route hoses and cables
such that they do not
constitute a tripping hazard.

7

en Safety instructions

Caution!
Material damage/damage to

the appliance

■ If the water pressure is too

high or too low, the
appliance may not be able to
operate properly, and it may
also result in material
damage or damage to the
appliance.
Make sure that the water
pressure in the water supply
facility is at least
100 kPa (1 bar), and does
not exceed
1000 kPa (10 bar).

Material damage/damage to the appliance

■ If the water hoses are altered

or damaged, this may result
in material damage or
damage to the appliance.
The water hoses must not be
kinked, crushed, altered or
severed.

Material damage/damage to the appliance

■ The use of hoses supplied

by other brands to connect
to the water supply may
result in material damage or
damage to the appliance.
Use the hoses supplied with
the appliance or genuine
spare part hoses only.

Material damage/damage to the appliance

■ The appliance is secured for

transportation by transport
locking devices. If the
transport locking devices are
not removed before the
appliance is operated, this
may result in damage to the
appliance.
It is important to completely
remove all transport locking
devices before using the
appliance for the first time.
Make sure that you retain
these transport locking
devices separately. It is
important to refit the
transport locking devices if
the appliance is to be
transported, in order to
prevent the appliance from
being damaged in transit.

8

Safety instructions en

Operation

:Warning

Risk of explosions/fire!

Laundry that has been
pretreated with cleaning agents
that contain solvents, e.g. stain
remover/cleaning solvent, may
cause an explosion in the drum.
Rinse the laundry thoroughly
with water before washing it in
the machine.

:Warning

Risk of poisoning!

Poisonous fumes may be given
off by cleaning agents that
contain solvents, e.g. cleaning
solvent.
Do not use cleaning agents that
contain solvents.

:Warning

Risk of injury!

■ If you support your weight/sit

on the appliance door when
it is open, the appliance may
tip over, which may result in
injury.
Do not support your weight
on the appliance door when
it is open.

Risk of injury!

■ If you climb onto the

appliance, the worktop may
break, which may result in
injury.
Do not climb onto the
appliance.

Risk of injury!

■ If you reach into the drum

while it is still rotating, you
risk injuring your hands.
Wait until the drum has
stopped rotating.

:Warning

Risk of scalding!

When washing at high
temperatures, there is a risk of
scalding if you come into
contact with hot detergent
solution (e.g. when draining hot
detergent solution into a
washbasin).
Do not reach into the hot
detergent solution.

:Warning

Irritation of the respiratory tract/eyes!

This appliance runs
programmes that use active
oxygen. Active oxygen can
irritate the mucosa and cause
eyes to water.
Do not open the door using the
emergency release if a
programme is running with
active oxygen. Wait until the
door has been released.

9

en Safety instructions

:Warning

Eye/skin irritation!

Detergent and care products
may spray out if the detergent
drawer is opened while the
appliance is in operation.
Rinse eyes/skin thoroughly if
they/it come(s) into contact
with detergents or care
products. If accidentally
swallowed, seek medical
advice.

Caution!
Material damage/damage to

the appliance

■ If the amount of laundry in

the appliance exceeds its
maximum load capacity, it
may not be able to operate
properly, or this may result in
material damage or damage
to the appliance.
Do not exceed the maximum
load capacity of dry laundry.
Make sure you comply with
the maximum load capacities
specified for each of the
programs. ~ Page 29

Material damage/damage to the appliance

■ If you pour the wrong

quantity of detergent or
cleaning agent into the
appliance, this may result in
material damage or damage
to the appliance.
Use detergents/care
products/cleaning agents
and softeners in accordance
with the manufacturers'
instructions.

Cleaning/Maintenance

:Warning

Risk of death!

The appliance is powered by
electricity. There is a risk of
electric shock if you come into
contact with live components.
Therefore please note:

■ Switch off the appliance.

Disconnect the appliance
from the power supply (pull
out the plug).

■ Never take hold of the mains

plug with wet hands.

■ When removing the mains

plug from the socket, always
take hold of the plug itself
and never the mains cable,
otherwise this may damage
the mains cable.

■ Do not make any technical

modifications to the
appliance or its features.

■ Repairs and any other work

on the appliance must only
be conducted by our
customer service or by an
electrician. The same applies
for replacing the mains cable
(when necessary).

■ Spare mains cables can be

ordered from our customer
service.

10

Safety instructions en

:Warning

Risk of poisoning!

Poisonous fumes may be given
off by cleaning agents that
contain solvents, e.g. cleaning
solvent.
Do not use cleaning agents that
contain solvents.

:Warning

Risk of electric shock/material damage/damage to the appliance!

If moisture penetrates the
appliance, this may cause it to
short circuit.
Do not use a pressure washer
or steam cleaner to clean your
appliance.

:Warning

Risk of injury/material damage/damage to the appliance!

The use of spare parts and
accessories supplied by other
brands is dangerous and may
result in injury, material damage
or damage to the appliance.
For safety reasons, use
genuine spare parts and
accessories only.

Caution!
Material damage/damage to

the appliance

Cleaning agents and agents for
pretreating laundry (e.g. stain
removers, prewash sprays, etc.)
may cause damage if they
come into contact with the
surfaces of the appliance.
Therefore please note:

■ Do not allow these agents to

come into contact with the
surfaces of the appliance.

■ Clean the appliance with

nothing but water and a soft,
damp cloth.

■ Remove any detergent,

spray or other residues
immediately.

11

en Environmental protection

7 Environmental

protection

Environmental protection

Packaging/used appliance

)

Tips on economical use

■ Always fill the appliance with the

■ Wash normally soiled laundry

■ Save energy and detergent when

■ The selectable temperatures apply

Dispose of packaging in an
environmentally-responsible
manner.
This appliance is labelled in
accordance with European
Directive 2012/19/EU
concerning used electrical and
electronic appliances (waste
electrical and electronic
equipment - WEEE).
The guideline determines the
framework for the return and
recycling of used appliances
as applicable throughout the
EU.

maximum amount of laundry for the
relevant programme.
Overview of programmes

~ Page 29

without a prewash.

washing lightly and normally soiled
laundry. ~ Page 28

to the care labels on the textiles. The
temperatures in the machine may
deviate from this so that you get the
optimum mix of energy-saving and
washing results.

■ Information on energy and water

consumption: ~ Page 26
The displays provide information
about the relative level of energy and
water consumption in the selected
programmes.
The more indicator lights light up,
the higher the programme's
consumption.
This enables you to compare the
consumption levels of the different
programmes when choosing your
programme settings and decide on
an energy- and water-saving
programme setting.

■ Energy-saving mode: The display

panel lighting goes out after a few
minutes and the Ü button flashes.
Press any button to activate the
lighting.
Energy-saving mode is not activated
if a programme is running.

■ Automatic switch off: If the

appliance is not operated for a
prolonged period, it may
automatically switch off before the
programme starts and when the
programme has ended to save
energy. Press the main switch again
to switch on the appliance.
Switching the ~ Page 42 function
on/off

■ If the laundry is subsequently dried

in a tumble dryer, select the spin
speed according to the tumble dryer
manufacturer's instructions.

12

Positioning and connecting en

5 Positioning and

connecting

Positioning and connecting

Included with the appliance

Note: Check the machine for transport

damage. Never use a damaged
machine. If you have any complaints,
contact the dealer from whom you
purchased the appliance or our
customer services. ~ Page 51





#

+

3

( Mains cable
0 Bag:

■ Installation and operating

instructions

■ Customer services location

directory*

■ Warranty*

■ Cover caps for openings after

the transport braces have
been removed

■ Adaptor with sealing washer

from 21 mm = ½" to

26.4 mm = ¾" *

8 Water supply hose on Aqua-Stop

models

@ Water drain hose
H Elbow for securing the water

drain hose*

P Water supply hose on standard/

Aqua-Secure models

* depending on the model

In addition, a hose clamp (24 - 40 mm
diameter, available from specialist
dealers) is required to connect the
water drain hose to a siphon.

Useful tools

■ Spirit level for aligning

■ Spanner with:

– WAF13 for loosening the

transport braces, and

– WAF17 for aligning the appliance

feet

13

en Positioning and connecting

Safety instructions

:Warning

Risk of injury!

■ The washing machine is very heavy.

Be careful when lifting/transporting
the washing machine.

■ When the washing machine is lifted

by its protruding parts (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.

■ If the hose and mains cables are not

routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.

Caution!
Damage to the appliance

Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.

Caution!
Water damage

The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
leaks and water damage, you must
follow the instructions in this section.

Notes

■ In addition to the safety information

listed here, the local water and
electricity supplier may have special
requirements.

■ If in doubt, have the appliance

connected by a specialist.

Installation surface

Note: The washing machine be stable

so that it does not move around.

■ The installation surface must be firm

and level.

■ Soft floors/floor coverings are not

suitable.

Installation on a base or a wooden joist floor

Caution!
Damage to the appliance

The washing machine may "wander"
and tip/topple from the base when
spinning.
The feet of the appliance must be
secured with holding brackets.
Order no. WMZ 2200, WX 9756,
Z 7080X0

Note: On wooden joist floors, install the

washing machine:

■ In a corner, if possible,

■ On a water-resistant wooden board

(min. 30 mm thick) which is screwed
tightly to the floor.

Installation on a platform with drawer

Platform order no.: WMZ 20490,
WZ 20490, WZ 20510, WZ 20520

14

Positioning and connecting en

Installing the appliance in a kitchenette

:Warning

Danger of death!

There is a risk of electric shock if you
touch live components.
Do not remove the appliance covering
plate.

Notes

■ Recess width of 60 cm required.

■ Only install the washing machine

underneath a continuous worktop
that is securely connected to
adjacent cabinets.

Removing the transport locks

Caution!
Damage to the appliance

■ The machine is secured for

transportation using transport locks.
If the transport locks are not
removed, the drum, for example,
may become damaged when the
machine is operated.
Before using the appliance for the
first time, make sure that you
completely remove all four transport
locks. Keep the locks in a safe
place.

■ To prevent transport damage from

occurring if the appliance is moved
at a later date, you must refit the
transport locks before transporting
the appliance.

1. Take the hoses out of the holders.

2. Unscrew and remove all four

transportation securing bolts with a
wrench (WAF 13).
Remove the sleeves. Remove the
mains cable from the holders.

3. Insert the covers. Lock the covers

firmly in place by applying pressure
to the snap-in hooks.

Note: Keep the screws and sleeves in

a safe place.

15

en Positioning and connecting

Hose and cable lengths

■ Left-hand connection

aFP

aFP

PD[FP

aFP

■ Right-hand connection

aFP

aFP

aFP

Tip: The following are available from

specialist dealers/customer services:

■ Extension for Aqua-Stop and cold

water supply hose (approx. 2.50 m);
order no. WM Z2380, WZ 10130,
CZ 11350, Z 7070X0

■ A longer supply hose (approx.

2.20 m) for standard models;
individual component number for
customer services: 00353925

PD[FP

16

Positioning and connecting en

Water inlet

:Warning

Danger of death!

There is a risk of electric shock if you
touch live components.
Do not immerse the Aqua-Stop safety
valve in water (it contains an electric
valve).

Notes

■ Only operate the washing machine

using cold mains water.

■ Do not connect the machine to the

mixer tap of an unpressurised hot­water boiler.

■ Do not use a used supply hose. Only

use the supply hose supplied or one
that was purchased from an
authorised specialist retailer.

■ Do not kink or squash the water

supply hose.

■ Do not alter (shorten, cut through)

the water supply hose (otherwise its
strength is no longer guaranteed).

■ Only tighten the screw connections

by hand. If the screw connections
are tightened too much with a tool
(pliers), the thread may become
damaged.

■ When connecting to a 21 mm = ½"

tap, first fit an adapter* with a sealing
washer from 21 mm = ½" to

26.4 mm = ¾".
*supplied depending on the model

When the tap is open, the water flow
rate is at least 8 l/min.

If the water pressure is higher than this,
a pressure-reducing valve must be
installed.

Connection

Connect the water supply hose to the
tap (26.4 mm = ¾") and to the
appliance (not necessary for Aqua-Stop
models as this is permanently installed):

■ Model: Standard

■ Model: Aqua-Secure

■ Model: Aqua-Stop

ê

PLQPP

ë

Optimum water pressure in the supply
network

At least 100 kPa (1 bar)
Maximum 1000 kPa (10 bar)

Note: Turn on the tap carefully,

checking the leak tightness of the
connection points. The screw
connection is under mains water
pressure.

17

en Positioning and connecting

Water outlet

:Warning

Risk of scalding!

When you are washing at high
temperatures, there is a risk of scalding
if you come into contact with hot water
(e.g. when draining hot water into a
washbasin).
Do not reach into the hot water.

Caution!
Water damage

If the drain hose slips out of the
washbasin or the connection point
during draining due to high water
pressure, any escaping water may
cause water damage.
Secure the drain hose so that it cannot
slip out.

Caution!
Damage to the appliance/fabrics

If the end of the drain hose is immersed
in the drained water, water may be
sucked back into the appliance and
may damage the appliance/fabrics.
Make sure that:

■ The plug does not block drainage

from the washbasin.

■ The end of the drain hose is not

immersed in the drained water.

■ The water drains away quickly

enough.

Connection

■ Drainage into a washbasin

■ Drainage into a siphon

The connection point must be
secured using a hose clamp with a
diameter of 24 - 40 mm (available
from specialist dealers).

■ Drainage into a plastic pipe with

rubber bushing or into a drainage
pit

Note: Do not kink the water drain hose

or put strain on it lengthways.

18

Levelling

Align the appliance using a spirit level.
Incorrect alignment may result in loud

noises, vibrations and machine
"movement".

1. Loosen the lock nuts using a WAF17

spanner, by turning it in a clockwise
direction.

2. Check the alignment of the washing

machine with a spirit level, and
adjust it if necessary. Change the
height by turning the appliance feet.
All four appliance feet must stand
firmly on the ground.

3. The lock nuts on all four appliance

feet must be screwed tightly against
the housing using a suitable WAF17
spanner. In doing so, hold the foot
tight and do not adjust its height.

Positioning and connecting en

19

en Positioning and connecting

Electrical connection

:Warning

Danger of death!

There is a risk of electric shock if you
touch live components.

■ Never touch or hold the mains plug

with wet hands.

■ Only pull out the mains cable by the

plug and never by the cable, as this
could damage it.

■ Never unplug the mains plug during

operation.

Observe the following information and
ensure that:

Notes

■ The mains voltage and voltage

indicated on the washing machine
(rating plate) are the same.
The connected load and fuse
required are specified on the rating
plate.

■ The washing machine is only

connected to an alternating current
supply via a properly installed
earthed socket.

■ The mains plug fits the socket.

■ The cable cross-section is adequate.

■ The earthing system is properly

installed.

■ The mains cable is only replaced by

a qualified electrician (if this is
necessary). Replacement mains
cables are available from customer
services.

■ No multiple plugs/couplings or

extension cables are used.

■ If an earth-leakage circuit breaker is

used, only a type which displays the
z symbol is used.
Only this symbol guarantees
compliance with the currently
applicable regulations.

■ The mains plug can be accessed at

all times.

■ The mains cable is not kinked,

squashed, altered or cut through.

■ The mains cable does not come into

contact with heat sources.

20

Before using the appliance for the first time

The washing machine was thoroughly
tested before leaving the factory.To
remove any water that may be left over
from the test, run the first wash cycle

without any laundry.

Notes

■ The washing machine must be

correctly installed and connected.

From ~ Page 13

■ Never use a machine if it is

damaged. Inform the after-sales
service.

Preparatory work:

1. Check the machine.

2. Remove the protective film from the

control panel.

3. Plug in the mains plug.

4. Turn on the tap.

Running the programme without laundry:

1. Switch on the appliance.

2. Close the door (do not load any

laundry).

3. Set the Drum Clean î 90 °C

programme.

4. Open the detergent drawer.

5. Pour approximately 1 litre of water

into compartment II.

6. Pour standard washing powder into

compartment II.

Note: To prevent foaming, only use

half the amount of detergent
recommended by the detergent
manufacturer.Do not use detergents
intended for woollens or delicates.

7. Close the detergent drawer.

8. Press the Ü button.

9. Switch off the appliance at the end of

the programme.

Your washing machine is now ready to
use.

Positioning and connecting en

21

en Positioning and connecting

Transportation

E.g. when moving house

Preparatory work:

1. Turn off the tap.

2. Reduce the water pressure in the

supply hose: ~ Page 46; Cleaning
and maintenance – filter in the water
supply blocked

3. Disconnect the washing machine

from the mains.

4. Drain the remaining water:

~ Page 45; cleaning and
maintenance – the drain pump is
blocked, emergency draining

5. Remove the hoses.

Fitting the transportation securing means:

1. Remove the covers and keep them

in a safe place.
If required, use a screwdriver.

Before switching on the appliance
again:

Notes

■ The transport braces must be

removed.

■ Pour approx. 1 litre of water into

compartment II, select the Drain
programme and start.
This will prevent detergent from
flowing unused into the drain during
the next wash.

2. Insert all four sleeves.

Clip the mains cable securely in the
holders. Insert the transportation
securing bolts and tighten them with
a wrench (WAF 13).

22

Main points in brief en

Y Main points in brief

Main points in brief

1 @ @ @

Connect the mains
plug. Turn on the

--------

tap.

Open the door. To switch on, press

the # button.

2 @ @ @

Sort the laundry. Observe the

Load the laundry. Close the door.
maximum load
(depending on the
model) on the

--------

display panel.

3 @ @

Add detergent. If necessary, change the default programme

--------

4 @ @ @

settings and/or select additional settings.

Select a
programme, e.g.
Cottons.

FODFN

Start the
programme.

End of the programme Open the door and

remove the laundry.

--------

To switch off, press

the # button.

Turn off the tap (for
models without
Aqua-Stop).

23

en Getting to know the appliance

* Getting to know the appliance

Getting to know the appliance

Washing machine









#

6 7

( Detergent drawer ~ Page 38
0 Operating/display panel
8 Door with door handle
9S Open the door
9T Close the door
@ Service flap

24

Control panel

Getting to know the appliance en

( Main switch

for switching the washing machine
on and off:
Press the # button.

0 Programme selector

for selecting a programme.
Programme overview ~ Page 29

8 Additional programme settings:

~ Page 36

■ speedPerfect G,

■ ecoPerfect ¦,

■ Prewash,

■ Rinse Plus,

■ Less Ironing,

■ sensoFresh Intensity

@ Ü button for:

■ Starting a programme,

■ Interrupting a programme, e.g.

to add items of laundry
~ Page 40,

■ Cancelling a programme

~ Page 40

H Changing the default programme

settings: ~ Page 35

■ Temperature (Temp. °C),

■ Spin speed (Spin 0),

■ Finish in

P Child lock (w 3 sec.)

to prevent the set functions from
being changed accidentally:
To do so, press the Finish in +
and - buttons at the same time for
approx. 3 seconds. ~ Page 39

X Display panel for settings and

information. ~ Page 26

25

en Getting to know the appliance

Display panel

#



Default programme settings:
( Temperature in °C

Ž - 90 (Ž = cold)

■ Spin speed in rpm,

0

8

@ Information on energy and water

Further information

Ù Ú sensoFresh Intensity

Programme progress:

î Active oxygen phase

$, 0 - 1600*;
* Max. spin speed, depending
on the selected programme
and model,

■ 0 = no spin cycle, draining only

~ Page 35,

■ $ = Rinse Stop ~ Page 35

■ Finish in

e.g. 2:30;
Programme duration depends
on the programme selection in
h:min (hours:minutes)

■ End time preselection

1 - 24 h;
Programme ends after ... h
(h = hours),

■ Load recommendation

e.g. kg 9*;
* depending on the selected
programme

consumption: ~ Page 12

■ w { { { { {

Water consumption display,

■ § { { { { {

Energy consumption display

~ Page 36



Further information

! Prewash

¼ Wash
õ Rinse

0 Spin

- 0 - Programme end
$ Programme end during Rinse

Stop

- P - Pause, e.g. to reload laundry

Loading door:

Ï
lights up

Ï
flashes

The washing machine door can
be opened.

When the programme has
started: The washing machine
door is not closed properly.

Tap:

|
lights up

|
flashes

Tap not turned on, no water
pressure

Water pressure too low (may
increase the programme
duration)

Childproof lock: ~ Page 39
w

Childproof lock activated

lights up
w

flashes

Childproof lock activated,
programme selector adjusted

Foam detection function:
o

~ Page 39

lights up

Fault display:

E: - - ~ Page 48

Signal setting:

0 - 4 ~ Page 42

Automatic switch-off of the appliance:

On OFF ~ Page 12, ~ Page 42

26

Laundry en

Z Laundry

Laundry

Prepare the laundry

Caution!
Damage to the appliance/fabrics

Foreign objects (e.g. coins, paperclips,
needles, nails) may damage the laundry
or components in the washing machine.

You should therefore note the following
tips when preparing your laundry:

■ Empty any pockets.

■ Look out for metal items (paperclips,

etc.) and remove them.

■ Wash delicates in a laundry bag

(tights, underwired bras, etc.).

■ Close any zips; button up any cover

buttons.

■ Brush sand out of pockets and

collars.

■ Remove curtain fittings or place

curtains in a laundry bag.

Sorting laundry

Some examples of soiling levels can
be found on ~ Page 28
– Light: Do not prewash, select the

speedPerfect G setting if

necessary
– Normal
– Heavy: Load less laundry, select

a programme with prewash
– Stains: Remove/pretreat stains

while they are fresh. Firstly, dab

with soapy water; do not rub.

Then wash the items of laundry

with the appropriate programme.

Stubborn or dried-in stains can

sometimes only be removed by

washing several times.

■ Symbols on the care labels

Note: The numbers in the symbols

indicate the maximum washing
temperature that may be used.

M Suitable for normal washing

process;
e.g. Cottons programme

U A gentle washing process is

required;
e.g. Easy-Care programme

O An especially gentle washing

process is required; e.g.
Delicate/Silk programme

W Suitable for washing by hand;

e.g. W Woollens programme

Ž Do not machine wash.

Sort your laundry according to the care
instructions and manufacturer's
information on the care labels,
depending on:

■ Type of fabric/fibre

■ Colour

Note: Laundry may discolour. Wash

white and coloured items separately.
Wash new coloured items separately
the first time you wash them.

■ Soiling

Wash laundry with the same level of
soiling together.

27

en Detergent

C Detergent

Detergent

Correct selection of detergent

The care label is crucial for selecting
the correct detergent, temperature and
treatment of the laundry. ~ See also
www.sartex.ch

If you visit www.cleanright.eu, you will
find further information on detergents,
care products and cleaning agents for
domestic use.

■ Standard detergent with optical

brighteners

Suitable for boil-washable white
laundry made from linen or cotton
Programme: Cottons/
cold - max. 90 °C

■ Detergent for colours without

bleach or optical brighteners

Suitable for coloured laundry made
from linen or cotton
Programme: Cottons/
cold - max. 60 °C

■ Detergent for colours/delicates

without optical brighteners

Suitable for coloured laundry made
from easy-care fibres, synthetic
fibres
Programme: Easy-Care/
cold - max. 60 °C

■ Detergent for delicates

Suitable for delicate, fine fabrics, silk
or viscose
Programme: Delicate/Silk/
cold - max. 40 °C

■ Detergent for woollens

Suitable for wool
Wool programme/
cold - max. 40 °C

Saving energy and detergent

For light and normal soiling, you can
save energy (lower washing
temperature) and detergent.

Saving Soiling/note

Reduced
temperature and
detergent quantity
as per the
recommended
dosage

Temperature as
per the care label
and detergent
quantity as per the
recommended
dosage for heavy
soiling

Note: When measuring the amount of

all detergents/additives/care products
and cleaning agents, please always
check the manufacturer's instructions
and information. ~ Page 38

Light

No visible dirt or stains.
Clothing has taken on some
body odour, e.g.:

■ Light summer/sports

clothing (worn for a few
hours)

■ T-shirts, shirts, blouses

(worn for up to one day)

■ Guest bed linen and hand

towels (used for one day)

Normal

Visible dirt or a few light
stains, e.g.:

■ T-shirts, shirts, blouses

(sweat soaked, worn a
few times)

■ Towels, bedding (used for

up to one week)

Heavy

Dirt and/or stains clearly
visible, e.g. tea towels, baby
items, work clothing

28

Overview of programmes en

/ Overview of programmes

Overview of programmes

Programmes on the programme selector

Programme/Type of laundry/Instructions Settings

Name of the programme

Brief explanation of the programme and for which fabrics it is
suitable.

Cottons

Hard-wearing fabrics, heat-resistant fabrics made of cotton or
linen

Note: . The speedPerfect G setting is suitable as a short

programme for lightly soiled laundry.

Cottons Eco

Hard-wearing fabrics, heat-resistant fabrics made of cotton or
linen;

Energy-optimised washing by reducing the temperature while
achieving a comparable washing result for the Cottons
programme.

Note: . The washing temperature is lower than the selected

temperature. If you want to achieve a higher water temperature,
use the Cottons programme with a higher temperature as
required.

Easy-Care

Textiles made of synthetic materials or blended fabrics

* Reduced load for the speedPerfect G setting
** Max. spin speed, depending on the model
*** Programme depending on the model

Max. load

Temperature that can be selected
(Ž = cold)

Spin speed that can be selected**;
$ = Rinse Stop,
0 = no spin cycle, draining only

programme additional
settings that can be selected

Max. 9 kg/5* kg

Ž - 90 °C
$, 400 - 1600** rpm

ecoPerfect ¦, speedPerfect G,
Prewash,
Rinse Plus,
Less Ironing

Max. 9 kg

Ž - 90 °C
$, 400 - 1600** rpm

Prewash,
Rinse Plus,
Less Ironing

Max. 4 kg

Ž ... 60 °C
$, 0 - 1200 rpm

ecoPerfect ¦, speedPerfect G,
Prewash,
Rinse Plus,
Less Ironing

29

en Overview of programmes

Programme/Type of laundry/Instructions Settings

Mixed Fabrics

Mixed load of cottons and synthetic fabrics

Max. 4 kg

Ž - 40 °C
$, 0 - 1600** rpm

ecoPerfect ¦, speedPerfect G,
Prewash,
Rinse Plus,
Less Ironing

Delicates / Silk

For delicate, washable fabrics, e.g. made of silk, satin, synthetic
fibres or blends (e.g. silk blouses, silk scarves)

Note: . Use a detergent that is suitable for machine-washing

delicate fabrics or silk.

Max. 2 kg

Ž - 40 °C
$, 0 - 800 rpm

ecoPerfect ¦, speedPerfect G,
Prewash,
Rinse Plus,
Less Ironing

: Wool
Hand- or machine-washable fabrics that are made of wool or

contain wool;
particularly gentle wash programme to prevent laundry from

shrinking, with longer pauses in the programme (during which

Max. 2 kg

Ž - 40 °C
$, 0 - 800 rpm

-

the items rest in the water)

Notes

■ Wool is of animal origin, e.g. angora, alpaca, llama, sheep.

■ Use a detergent that is suitable for machine-washing wool.

Rinse / Spin / Drain

Combined extra programme for rinsing and spinning the laundry,
and draining the rinsing water

Note: . The Rinse Plus button is activated at the factory for this

programme.

If you only want to spin the laundry: Deactivate the

-

­$, 0 - 1600** rpm

Rinse Plus,
Less Ironing

Rinse Plus button and, if required, adjust the spin speed.
If you only want to drain the water: Deactivate the

Rinse Plus button and select the spin speed 0.

* Reduced load for the speedPerfect G setting
** Max. spin speed, depending on the model
*** Programme depending on the model

30

Overview of programmes en

Programme/Type of laundry/Instructions Settings

sensoFresh î

Mixed load of cottons, synthetic fabrics, silk, satin, wool;
programme suitable for removing odours, e.g. the smell of

cigarettes and kitchen odours ~ Page 34

Notes

■ Observe max. load.

■ Not a washing programme/not suitable for removing stains

Max. 1 kg

-

­sensoFresh Intensity Ù, Ú

and sweat.

■ Load dry laundry only.

■ Before loading the laundry, wipe the drum dry if necessary,

turning it as you do so to remove all water.

Drum Clean î

The cleaning programme, combined with an active oxygen phase
followed by a washing programme, thoroughly cleans and cares
for the drum and outer tub, and eliminates odours.

Run the programme, e.g.:

■ before using the appliance for the first time,

■ if you regularly wash at low temperatures (40 °C or lower) or

■ if there are odours due to a long absence.

0 kg

90 °C

1200 rpm

-

Notes

■ The Drum Clean î indicator lamp flashes when you use

have not used a programme at 60 °C or higher for a long
time.

■ Run the programme without laundry.

■ Use washing powder or a detergent containing bleach. To

prevent foaming, only use half the amount of detergent
recommended by the detergent manufacturer. Do not use
detergent designed for woollens or delicates.

Rapid 15

Extra-short programme of approx. 15 minutes, suitable for small
items of lightly soiled laundry

Max. 2 kg

Ž - 40 °C
$, 0 - 1200 rpm

-

* Reduced load for the speedPerfect G setting
** Max. spin speed, depending on the model
*** Programme depending on the model

31

en Overview of programmes

Programme/Type of laundry/Instructions Settings

Dark Wash

Dark-coloured cottons and dark-coloured easy-care fabrics;
Turn items inside-out before washing.

Max. 3.5 kg

Ž - 40 °C
$, 0 - 1200 rpm

ecoPerfect ¦, speedPerfect G,
Prewash,
Rinse Plus,
Less Ironing

Hygienic Mix î

Mixed load of cottons, synthetic fabrics, silk, satin;
The washing programme, combined with an active oxygen

laundry treatment followed by a washing programme, is
particularly suitable for delicate fabrics with high hygiene
requirements.

Max. 4 kg

Ž - 40 °C
$, 400 - 1600** rpm

ecoPerfect ¦, speedPerfect G,
Prewash,
Rinse Plus,
Less Ironing

*** Textile Guard
Wash cycle followed by waterproofing of membrane-coated

weatherproof and outdoor clothing or water-resistant fabrics

1. Select a programme.

2. Add special detergent for outdoor clothing to compartment

II.

Max. 1 kg

Ž - 40 °C
$, 0 - 800 rpm

ecoPerfect ¦, speedPerfect G,
Rinse Plus,

3. Add a waterproofing agent (max. 170 ml) to compartment

i.

4. Press the Ü button. After-treat the laundry in accordance

with the manufacturer's instructions.

Notes

■ Use a special detergent suitable for machine washing and

dose in accordance with the manufacturer's instructions:

■ Laundry must not be treated with fabric softener.

■ Before washing, clean the detergent drawer thoroughly (all

compartments) to remove fabric softener residue.

* Reduced load for the speedPerfect G setting
** Max. spin speed, depending on the model
*** Programme depending on the model

32

Overview of programmes en

Programme/Type of laundry/Instructions Settings

*** Outdoor
Membrane-coated weatherproof or outdoor clothing and water-

resistant fabrics

Notes

■ Use special detergent suitable for machine-washing; add the

correct dosage to compartment II in accordance with the

Max. 2 kg

Ž - 40 °C
$, 0 - 800 rpm

ecoPerfect ¦, speedPerfect G,
Rinse Plus,

manufacturer's instructions.

■ Laundry must not be treated with fabric softener.

■ Before washing, clean the detergent drawer thoroughly (all

compartments) to remove fabric softener residue.

Shirts / Blouse

Non-iron shirts or blouses made of cotton, linen, synthetic fibres
or blended fabrics

Notes

■ Shirts/blouses are only given a short spin on the

Less Ironing setting. Hang them up to dry while still dripping
wet. ~ Self-smoothing effect

■ Use the Delicates / Silk programme to wash shirts/blouses

made of silk or delicate fabrics.

Max. 2 kg

Ž - 60 °C
$, 0 - 800 rpm

ecoPerfect ¦, speedPerfect G,
Prewash,
Rinse Plus,
Less Ironing

* Reduced load for the speedPerfect G setting
** Max. spin speed, depending on the model
*** Programme depending on the model

33

en Overview of programmes

sensoFresh î

sensoFresh î is an innovative

programme that is designed to refresh
laundry and remove odours (e.g. the
smell of cigarettes and kitchen odours).
Sweaty fabrics must be washed.

In this programme, your laundry is
treated with active oxygen and water
mist; detergent is not added.

Active oxygen is a special type of
oxygen which effectively reduces
odours.

The programme is suitable for all types
of material and fabric, even for those
which should only be professionally
cleaned.

Once the programme has started, the
drum inside the appliance lights up and
the mist that is created can be seen.

Once the programme has finished, take
the laundry out of the drum and shake it
out briefly.

Notes

■ Leave the door and detergent

drawer open slightly when the
appliance is not in use. ~ Page 44

■ The active oxygen treatment is less

effective if the drum is dirty. Run the
Drum Clean î programme
regularly.

■ It is not possible to add laundry once

the programme has started.

■ If you cancel the programme or

switch to a different one, the door
will remain locked until there is no
longer any active oxygen in the
drum. This make take up to
25 minutes. The two symbols Ï and
î will flash during this time. The
door will then unlock automatically.

Starching

Note: Laundry should not be treated

with fabric softener.

Liquid starch can be used to stiffen
fabrics particularly in the Rinse and
Cottons programmes. Measure starch
into compartment M in accordance with
the manufacturer's instructions (clean
first if necessary).

Dyeing/bleaching

Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.

Do not use the washing machine to
bleach clothes.

Soaking

1. Switch on the appliance.

2. Select the Cottons 30 °C

programme.

3. Pour soaking agent/detergent into

compartment II in accordance with
the manufacturer’s instructions.

4. Press the Ü button. The programme

starts.

5. After approx. 10 minutes, press the

Ü button to pause the programme.

6. Leave the laundry to soak for as long

as required, then either press the Ü
button again to continue the
programme or change the
programme.

Notes

■ Load laundry of the same colour.

■ No additional detergent is required;

the soaking solution is used for
washing.

34

Programme default settings en

0 Programme default

settings

Programme default settings

The default programme settings are
displayed in the display panel after
selecting the programme.

You can change the default settings.
An overview of all programme settings,

which can be selected depending on
the programme, can be found from
~ Page 29.

Temperature

(Temp. °C)
Depending on what stage the

programme is in, you can change the
set temperature before and during the
programme.

The maximum temperature that can be
set depends on the programme that has
been selected.

Spin speed

(Spin 0)
Depending on what stage the

programme is in, you can change the
spin speed (in rpm; revolutions per
minute) before and during the
programme.

Setting 0: The rinsing water is drained
but there is no final spin. The laundry
stays wet inside the drum, e.g. for items
that should not be spun.

Setting $: Rinse Stop = no final spin.
The laundry stays in the water after the
final rinse.

You can select “Rinse Stop” to prevent
creasing if the laundry will not be taken
out of the washing machine immediately
after the programme has ended.

To continue/end the programme

~ Page 40

The maximum speed that can be set
depends on the model and programme
that has been selected.

Finish in

Before starting the programme, you

can preselect the programme end
("Ready in" time) in hourly increments
(h = hour) up to a maximum of
24 hours.

To do this:

1. Select a programme.

The programme duration is displayed
for the selected programme, e.g.

2:30 (hours:minutes).

2. Press the Finish in button repeatedly

until the required number of hours is
displayed.

Note: The setting values are

increased using the Finish in +
button, and decreased using the

Finish in - button.

3. Press the Ü button.

The programme starts.
The selected number of hours
(e.g. 8 h) is shown in the display
panel and counts down until the
wash programme starts. The duration
of the programme is then displayed.

Note: The length of the programme is

automatically adjusted when the
programme is running. Changes to the
default programme settings or
programme settings may also change
the programme duration.

After starting the programme (if a
Finish in time has been selected and the
wash programme has not yet started),
you can change the preselected number
of hours as follows:

1. Press the Ü button.

2. Use the Finish in - or + button to

change the number of hours.

3. Press the Ü button.

After starting the programme, you can

add or remove laundry if necessary.

~ Page 40

35

en Additional programme settings

\ Additional programme

settings

Additional programme settings

An overview of all additional settings,
which can be selected depending on
the programme, can be found from
~ Page 29.

speedPerfect G

Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more energy
than, the selected programme, without
the speedPerfect G setting.

Note: Do not exceed the maximum

load.
Overview of programmes ~ Page 29

ecoPerfect ¦

Energy-optimised washing by reducing
the temperature while achieving a
washing result that is consistent with the
selected programme, without the
ecoPerfect ¦ setting.

Less Ironing

Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.

Note: The washing's residual moisture

is increased.

sensoFresh Intensity

The intensity of the active oxygen
treatment can be set at 2 levels:

Ù normal; for light odours
Ú intensive; for strong odours

(cigarettes, kitchen odours)

Prewash

For heavily soiled laundry.

Note: Pour detergent into

compartments I and II.

Rinse Plus

Additional rinse cycle for particularly
sensitive skin and/or for areas with very
soft water.

36

Operating the appliance en

1 Operating the

appliance

Operating the appliance

Preparing the washing machine

Note: The washing machine must be

correctly installed and connected.

From ~ Page 13.

1. Connect the mains plug.

2. Turn on the tap.

3. Open the door.

4. Check that the drum is completely

drained. Drain if necessary.

Switching on the appliance/ selecting a programme

Press the # button. The appliance is
switched on.

The Cottons programme set at the
factory is then always displayed.

You can use this programme or select a
different programme. The programme
selector can be turned in either
direction.

Note: If you have activated the

childproof lock, you must deactivate it
before you can set a different
programme. ~ Page 39

■ The maximum load and the duration

of the programme (alternately)

■ Information on water and energy

consumption
In appliances with a drum light:
The drum is lit after switching on the

appliance, after opening and closing the
door and after starting the programme.
The light switches off automatically.

Placing laundry into the drum

:Warning

Danger of death!

Items of laundry pretreated with cleaning
agents that contain solvents, e.g. stain
remover/cleaning solvent, may cause an
explosion after being loaded into the
washing machine.
Hand-rinse these items of laundry
thoroughly beforehand.

Notes

■ Mix items of laundry of varying sizes.

Laundry items of different sizes

distribute themselves better during

the spin cycle. Individual laundry

items may cause an unbalanced

load.

■ Observe the maximum specified

load. Overfilling adversely affects the

washing result and promotes

creasing.

1. Unfold presorted laundry items and

place them in the drum.

2. Make sure that no items of laundry

are trapped between the door and

the rubber seal, and close the door.

The indicator light on the programme
selector lights up and the default
programme settings for the selected
programme appear in the display panel:

■ Temperature

■ Spin speed

The Ü button indicator lamp flashes and
the programme settings appear in the
display panel.

37

en Operating the appliance

Measure and add detergent and care products

Caution!
Damage to the appliance

Cleaning agents and agents for pre­treating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.

Dosing

Dose the detergents and care products
according to:

■ Water hardness (ask your water

supply company)

■ The manufacturer's instructions on

the packaging

■ The amount of laundry

■ Soiling ~ Page 28

Filling

:Warning

Eye/skin irritation!

Detergents and care products may
spray out if the detergent drawer is
opened while the machine is in
operation.
Open the drawer carefully.
Rinse eyes/skin thoroughly if they come
into contact with detergents or care
products.
If accidentally swallowed, seek medical
advice.

Note: Dilute viscous fabric softener and

fabric conditioner with a little water. This
prevents blockages in the washing
machine's piping.

Pour the detergent and care products
into the appropriate compartments:

Measuring aid A For liquid detergent
Compartment II Detergent for the

main wash, water
softener, bleach, stain
remover

Compartment i Fabric softener, liquid

starch;
do not exceed max.

Compartment I Detergent for prewash

1. Pull out the detergent drawer as far

as possible.

2. Add detergent and/or care products.

3. Close the detergent drawer.

Measuring aid* for liquid detergent

*depending on the model

Position the measuring aid for dosing
the correct amount of liquid detergent:

1. Pull out the detergent drawer. Press

down the insert and fully remove the
drawer.

2. Slide the measuring aid forwards,

fold it down and click it into place.

3. Reinsert the drawer.

Note: Do not use the measuring aid for

gel detergents and washing powder, or
for programmes with prewash or when
the “Ready in” time is selected.

For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in the
drum.

38

Operating the appliance en

Change the programme default settings

You can use or change the default
settings for this washing cycle.

To do this, repeatedly press the
corresponding button until the required
setting is displayed.

Note: Pressing and holding the button

automatically runs through the set
values to the end. Then press the button
once more and you can then change
the setting values again.

The settings are activated without
needing to be confirmed.

The settings are not saved after
switching off the washing machine.

Default programme settings~ Page 35

Select additional programme settings

By selecting additional settings, you can
better adapt the washing process to
your items of laundry.

The settings can be selected or
deselected depending on the
programme progress.

The button indicator lamps light up if a
setting is activated.

The settings are not saved after
switching off the washing machine.

Additional programme settings

~ Page 36

Start the programme

The display panel shows the "Ready in"
time while the programme is running or
the programme length and the
programme progress symbols when the
washing programme has started.
Display panel ~ Page 26

Note: Foam detection

If the o symbol also lights up in the
display panel, the washing machine has
detected too much foam during the
wash programme and automatically
activated additional rinse cycles to
remove the foam.
Add less detergent to the next washing
cycle with the same load.

If you want to lock the programme to
prevent it from being inadvertently
adjusted, you can select the childproof
lock as follows.

Child lock

(w 3 sec.)
You can lock the washing machine to

prevent the functions you have set from
being changed inadvertently. To do this,
activate the childproof lock.

To activate/deactivate, press and hold
the Finish in - and + buttons at the
same time for approx. three seconds.
The w symbol is appears in the
display panel.

■ w lights up: The childproof lock is

active.

■ w flashes briefly: The childproof

lock is active and the programme

selector was turned or a button was

pressed.

Press the Ü button. The indicator lamp
lights up and the programme starts.

Note: You will need to press and hold

the Ü button to start the programme.
This prevents the programme from
being started if something accidentally
brushes against the button.

Note: The childproof lock remains

active, even once the washing machine
has been switched off. Before selecting
the next programme, deactivate the
childproof lock.

39

en Operating the appliance

Adding laundry

After starting the programme, you can
add or remove laundry if necessary.

Press the Ü button to do this.
The Ü button indicator lamp flashes

and the machine checks whether it is
possible to add laundry.

If the following appears in the display
panel:

■ Both the - P - and Ï symbols light

up, it is possible to add laundry.

■ - P - lights up, it is not possible to

add laundry.

To continue the programme, press the
Ü button. The programme continues
automatically.

Notes

■ Do not leave the door open for too

long when adding laundry as water
from the laundry may leak out.

■ For safety reasons, the door remains

locked when the water level or
temperature is high, while the drum
is turning or during the active oxygen
phase, and it is not possible to add
laundry during this time.

■ It is possible to add laundry during

the sensoFresh î programme.

■ The load display is not active during

reloading.

Note: When switching from

programmes that use active oxygen to
those that do not, the door will remain
locked for up to 25 minutes until there
is no longer any active oxygen in the
drum.
The Ï and î symbols will flash. If the
symbols are off, the door can be
opened.

Cancel the programme

For programmes at high temperatures:

1. Press the Ü button.

2. To cool down laundry: Select Rinse.

3. Press the Ü button.

For programmes at low temperatures:

1. Press the Ü button.

2. Select Spin or Drain.

3. Press the Ü button.

Note: When cancelling programmes

that use active oxygen, the door will
remain locked for up to 25 minutes until
there is no longer any active oxygen in
the drum.
Switch the appliance on again if
necessary. The Ï and î symbols will
flash. If the symbols are off, the door
can be opened.

Programme end during rinse hold

Changing the programme

If you have started the wrong
programme by mistake, you can
change the programme as follows:

1. Press the Ü button.

2. Select another programme.

3. Press the Ü button. The new

programme starts from the
beginning.

40

In the display panel, $ flashes, and the
preset spin speed and remaining
programme length are displayed for the
selected programme.

Continue the programme by:

■ Pressing the Ü button or

■ Changing the spin speed, or setting

the programme selector to Drain
and then pressing the Ü button.

Programme end

- 0 - and Ï appear in the display panel.
The Ü button indicator lamp is off.

Removing laundry/switching off the appliance

1. Open the door and remove the

laundry.

2. Press the # button. The appliance is

switched off.

3. Turn off the tap. Note: Not required for Aqua-Stop

models.

Notes

■ Do not leave any items of laundry in

the drum. They may shrink in the
next wash or discolour another item.

■ Remove any foreign objects from the

drum and the rubber seal – risk of
rusting.

■ Wipe the rubber seal dry.

Operating the appliance en

■ Leave the door and detergent

drawer open so that any residual
water can evaporate. ~ Page 44

■ Always wait until the programme

ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.

■ If the display panel goes off at the

end of a programme, the energy­saving mode is active. Press any
button to activate the panel.

41

en Appliance settings

Q Appliance settings

Appliance settings

You can change the following settings:

■ The volume of the buttons and the

information signals (e.g. at the end
of the programme)

■ Select/deselect the appliance's

automatic switch-off function

~ Page 12

■ Switch the drum-care information

signal on/off (depending on the
model).

You will need to activate the setting
mode in order to change these settings.

3RVLWLRQV







Activating the setting mode

1. Press the # button.

The appliance is switched on and
the Cottons programme is shown at
position 1.

2. Press the Temperature button and,

at the same time, turn the
programme selector clockwise to

position 2. Release the button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel.

You can now change the settings:

Changing the signal volume

Use the Finish in + or - button to
change the following settings at the
corresponding programme selector
positions:

■ 2: The volume of the information

signals and/or

■ 3: The volume of the button signals.

0 = off,
1 = quiet,
2 = medium,
3 = loud,
4 = very loud

Exit setting mode or:

Selecting/deselecting the
appliance automatic switch­off

With the programme selector in position
4, press the Finish in + or - button to
turn the automatic switch-off function on
or off.

Exit setting mode or:

Switching the drum-care information signal on/off

depending on the model
With the programme selector in position

5, press the Finish in + or - button to
switch the Drum Clean î information
signal on or off.

Exiting setting mode

42

To exit and save the settings, press the
# button.

The appliance is switched off. The
selected settings will take effect the next
time the washing machine is switched
on.

H Sensors

Sensors

Automatic load sensing

Depending on the type of fabric and
load, the automatic load sensing
function optimally adjusts the water
consumption and programme duration
in each programme.

Unbalanced load detection system

The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.

If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.

Note: Place large and small items of

laundry evenly in the drum.
~ Page 37, ~ Page 49

Sensors en

AquaSensor

depending on the model
During the rinse cycle, the AquaSensor

checks the degree of turbidity (turbidity
is caused by dirt and detergent residue)
of the rinsing water. The duration and
the number of rinse cycles depend on
the turbidity of the water.

43

en Cleaning and maintenance

2 Cleaning and

maintenance

Cleaning and maintenance

:Warning

Danger of death!

There is a risk of electric shock if you
touch live components.
Switch off the appliance and pull out the
mains plug.

:Warning

Risk of poisoning!

Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.

Caution!
Damage to the appliance

Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.

Prevent detergent residue from
building up and odours from forming
by following these instructions:

Machine housing/control panel

■ Wipe the housing and the control

panel with a soft, damp cloth.

■ Remove the detergent residue

immediately.

■ Do not clean with a water jet.

Drum

Use chlorine-free cleaning agents, do
not use steel wool.

If there are odours in the washing
machine, or to clean the drum, run the
Drum Clean î 90 °C programme
without laundry. Add washing powder.

Descaling

Descaling should not be necessary if
the detergent is measured out correctly.
However, if it is required, follow the
manufacturer's instructions for the
descaling agent. Suitable descalers can
be obtained via our website or from
customer services. ~ Page 51

Notes

■ Ensure the room in which the

washing machine is set up is well

ventilated.

■ Leave the door and detergent

dispenser tray open slightly when

the washing machine is not in use.

■ Occasionally run a wash using the

Cottons 60 °C programme and

powder detergent.

44

Detergent drawer and housing

If the washing machine contains
detergent or fabric softener residues:

1. Pull out the detergent drawer. Press

down the insert and fully remove the
drawer.

2. To remove the insert: Push the insert

upwards from below with your finger.

3. Clean the detergent dispenser tray

and insert with water and a brush,
and dry it. Clean the inside of the
housing as well.

4. Fit the insert and lock it in place

(push the cylinder onto the guide
pin).

5. Push in the detergent drawer.

Note: Leave the detergent drawer open

so that any residual water can
evaporate.

The drain pump is blocked, emergency draining

Cleaning and maintenance en

4. Take the drain hose out of the

retainer.
Remove the sealing cap and pour
the water out into a suitable
container.
Replace the sealing cap and place
the drain hose back in the retainer.

5. Carefully unscrew the pump cover;

residual water may leak out.
Clean the interior, pump-cover
thread and pump housing. The
impeller in the drain pump must be
able to rotate.
Refit the pump cover and screw it on
tightly. The handle must be in a
vertical position.

:Warning

Risk of scalding!

When you wash at high temperatures,
the water gets very hot. If you come into
contact with the hot water, you may be
scalded.
Allow the water to cool down.

1. Turn off the tap so that no more

water can flow in and has to be
drained via the drain pump.

2. Switch off the appliance. Pull out the

mains plug.

3. Open and remove the service flap.

6. Place the service flap back on, lock

it into place, and close it.

45

en Cleaning and maintenance

Note: To prevent unused detergent

from flowing straight into the drain
during the next wash: Pour 1 litre of
water into compartment II and start the

Drain programme.

The drain hose at the siphon is blocked

1. Switch off the appliance. Pull out the

mains plug.

2. Loosen the hose clamp. Carefully

remove the drain hose; residual

water may leak out.

3. Clean the drain hose and siphon

connecting piece.

4. Re-attach the drain hose and secure

the connection point using the hose

clamp.

Filter in the water supply blocked

Then clean the filter:

1. Disconnect the hose from the tap.

Clean the filter with a small brush.

2. For standard and Aqua-Secure

models, clean the filter on the rear of
the appliance:
Remove the hose from the rear of
the appliance.
Use pliers to remove the filter and
then clean it.

3. Connect the hose and check for

leaks.

First, reduce the water pressure in the supply hose:

1. Turn off the tap.

2. Select any programme

(except Rinse/Spin/Empty).

3. Press the Ü button. Allow the

programme to run for approximately

40 seconds.

4. Press the # button. The appliance is

switched off.

5. Pull out the mains plug.

46

Faults and what to do about them. en

3 Faults and what to do

about them.

Faults and what to do about them.

Emergency release

E.g. in the event of a power cut
The programme continues when the

power supply is restored.

However, if the laundry has to be
removed, the washing machine door
can be opened as follows:

:Warning

Risk of scalding!

When you are washing at high
temperatures, there is a risk of scalding
if you come into contact with hot
detergent solution and laundry.
If possible, leave it to cool down first.

:Warning

Risk of injury!

Reaching into the drum while it is still
turning may cause hand injuries.
Do not reach into the drum when it is
turning.
Wait until the drum has stopped turning.

Caution!
Water damage

Any escaping water may cause water
damage.
Do not open the washing machine door
if water can be seen through the glass.

1. Switch off the appliance. Pull out the

mains plug.

2. Drain the water

3. Use a tool to pull the emergency

release downwards and then
release.
The washing machine door can then
be opened.

. ~ Page 45

:Warning

Irritation of the respiratory tract!

Any active oxygen that is emitted may
irritate the mucosa and cause eyes to
water.
Do not open the door using the
emergency release if a programme is
running with active oxygen.
Wait until there is no active oxygen in
the drum.

47

en Faults and what to do about them.

Information on the display panel

Indicator/symbol Cause/remedy

- P - and Ï The door is unlocked. It is possible to add laundry.

- P - ■ The temperature is too high. Wait until the temperature drops.

■ The water level is too high. It is not possible to add laundry. Close the door

immediately, if necessary. Press the Ü button to resume the programme.

Ï is flashing ■ Laundry may be trapped. Open and close the door again and press the Ü

Ï and the

sensoFresh î
indicator light are
flashing

| is lit ■ Turn the tap on fully,

w The childproof lock is activated – deactivate it. ~ Page 39
o is lit Too much foam has been detected and additional wash cycles have been activated.

The indicator light for
the Drum Clean î
programme is
flashing

E:18 ■ The drain pump is blocked. Clean the drain pump. ~ Page 45

E:23 There is water in the base trough; the appliance is leaking. Turn off the tap. Call the

Other indicators/
symbols

button.

■ If necessary, push the door closed or remove the laundry and then push the

door closed again.

■ If necessary, switch the appliance off and on again; set the programme and

select the individual settings you require; start the programme.

The door cannot be opened due to the programme.
If the lights are off, the door can be opened.

■ Supply hose kinked/trapped,

■ The water pressure is too low. Clean the filter. ~ Page 46

Add less detergent to the next wash cycle with the same load.
Run the Drum Clean î 90 °C programme or a 60 °C programme with standard

washing powder to clean and care for the drum and the outer tub.

Notes

■ Run the programme without laundry.

■ Use standard washing powder or a detergent containing bleach. To prevent

foaming, only use half the amount of detergent recommended by the detergent
manufacturer. Do not use detergents intended for woollens or delicates.

■ Switch the information signal on/off. ~ Page 42

■ The drain hose/drain pipe is blocked. Clean the drain hose at the siphon.

~ Page 46

after-sales service. ~ Page 51

Switch off the appliance, wait for five seconds and then switch it on again. If the
indicator/symbol appears again, call the after-sales service. ~ Page 51

48

Faults and what to do about them. en

Faults and what to do about them.

Faults Cause/remedy

Water is leaking from the
machine.

The appliance is not filling
with water.

Detergent is not being
dispensed.

The door will not open. ■ The safety function is activated. Have you stopped the programme?

The programme will not
start.

The drum briefly jerks or
judders after the
programme has started.

The water is not draining. ■ Is $ selected (Rinse Stop = no final spin)? ~ Page 40

Water is not visible in the
drum.

The spin result is not
satisfactory.

Laundry wet/too damp.

The appliance restarts the
spin cycle several times.

The programme is taking
longer than usual.

The length of the
programme changes
during the wash cycle.

■ Attach the drain hose correctly or replace it.

■ Tighten the threaded joint on the supply hose.

■ Have you pressed the Ü button?

■ Is the tap turned on?

■ Could the filter be clogged? Clean the filter. ~ Page 46

■ Is the supply hose kinked or trapped?

~ Page 40

■ Is the w childproof lock activated? Deactivate it. ~ Page 39

■ Is $ selected (Rinse Stop = no final spin)? ~ Page 40

■ Can the door only be opened by the emergency release? ~ Page 47

■ When switching from a programme that uses active oxygen to one that

does not, the door will remain locked for up to 25 minutes until there is no
longer any active oxygen in the drum.

■ Have you pressed the Ü or Finish in button?

■ Is the door closed?

■ Is the w childproof lock activated? Deactivate it. ~ Page 39

Not a fault – the internal motor test may cause the drum to jerk or judder briefly
when the wash programme starts.

■ Clean the drain pump. ~ Page 45

■ Clean the drain pipe and/or the drain hose.

Not a fault – the water is below the visible area.

■ Not a fault – the unbalanced load detection system has interrupted the spin

cycle because the laundry is unevenly distributed.
Distribute small and large items of laundry evenly in the drum.

■ Is Less Ironing selected (depending on the model)? ~ Page 36

■ Is the selected speed too low?

Not a fault – the unbalanced load detection system is adjusting an imbalance.

■ Not a fault – the unbalanced load detection system is adjusting an

imbalance by repeatedly redistributing the laundry.

■ Not a fault – the foam detection system is on – a rinse cycle has been

activated.

Not a fault – the programme sequence is optimised for the specific washing
process. This may change the length of the programme shown on the display
panel.

49

en Faults and what to do about them.

Faults Cause/remedy

Water remaining in the
care product

■ Not a fault – the effectiveness of the care product is not affected.

■ Clean the insert if necessary.

compartment i .

Odours in the washing
machine.

Run the Drum Clean î or Cottons 90 °C programme without laundry.
Add standard washing powder or a detergent that contains bleach.

Note: . To prevent foaming, only use half the amount of detergent

recommended by the detergent manufacturer. Do not use detergents intended
for woollens or delicates.

The o symbol is lit on the
display panel. Foam may
also be leaking from the
detergent drawer.

Have you used too much detergent?
Mix one tablespoon of fabric softener with 1/2 litre of water and pour it into

compartment II (not suitable for outdoor clothing, sportswear or items made
with down).

Use less detergent for the next wash cycle.

Loud noises, vibrations
and machine “wandering”
during the spin cycle.

■ Is the appliance level? Level the appliance. ~ Page 19

■ Are the appliance's feet secured? Secure the appliance's feet. ~ Page 19

■ Have the transportation securing means been removed? Remove the

transportation securing means. ~ Page 15

The display panel/
indicator lights do not
work while the appliance
is running.

There are noises after the
programme starts

■ Has there been a power failure?

■ Have the fuses blown/has the circuit breaker tripped? Switch on the circuit

breaker/replace the fuses.

■ If the fault occurs repeatedly, call the after-sales service.

Not a fault – the appliance is filled with water to create mist; operating noises
from the fan and pump can be heard when it is doing this.

sensoFresh î.

Water stains on dry
laundry after the
sensoFresh î

■ Was residual water removed before laundry was added?

■ Level the appliance. The active oxygen treatment can only work properly if

the appliance is levelled correctly. ~ Page 19

programme.

Noises can be heard after
the sensoFresh î

Active oxygen leaves a specific odour on the laundry following treatment. Shake
out the laundry briefly.

programme.

Odour has not been
removed satisfactorily
after the sensoFresh î
programme.

■ The active oxygen treatment is less effective if the drum is dirty. Run the

Drum Clean î programme before using the appliance for the first time,
and regularly thereafter.

■ Have you loaded too much laundry? Do not exceed the maximum load.

■ Have you selected a high enough intensity? Select a higher intensity.

~ Page 36

■ Leave the door and detergent drawer open so that any residual water can

evaporate. ~ Page 44

There is detergent
residue on the laundry.

■ Some phosphate-free detergents contain water-insoluble residue.

■ Select Rinse or brush the laundry after washing.

50

After-sales service en

Faults Cause/remedy

- P - appears on the

display panel when the
cycle is paused.

- P - and Ï appear on

■ The water level is too high. It is not possible to add laundry. Close the door

immediately, if necessary.

■ Press the Ü button to resume the programme.

The door is unlocked. It is possible to add laundry.
the display panel when
the cycle is paused.

If you cannot rectify a fault yourself (after switching the machine off and then on again) or a repair is required:

■ Switch off the appliance and pull the mains plug out of the socket.

■ Turn off the tap and call the after-sales service.

4 After-sales service

After-sales service

If you cannot rectify a fault yourself,
contact customer services. ~ Cover
page

We will always find an appropriate
solution in order to avoid unnecessary
visits by engineers.

Please give customer services the
product number (E no.) and the
production number (FD) of the
appliance.

(1U )'

E no. Product number
FD Production number

You can find this information
*depending on the model:

On the inside of the door*/in the
opened service flap* and on the rear of
the appliance.

Trust the expertise of the
manufacturer.

Contact us for assistance. By doing so,
you will ensure that the repairs are
carried out by trained service personnel
using genuine spare parts.

51

en Consumption rates

[ Consumption rates

Consumption rates

Energy and water consumption, programme duration and residual moisture for the main washing programmes

(approximate values)

Programme Additional

Cottons 20 °C 9 kg 0,35 kWh 70 l 3 ] h
Cottons 40 °C 9 kg 1,25 kWh 70 l 3 ^ h

Cottons 60 °C 9 kg 1,20 kWh 70 l 3 h

Cottons 60 °C +
ecoPerfect ¦**

Cottons 90 °C 9 kg 2,60 kWh 80 l 3 h

Easy-Care 40 °C 4 kg 0,80 kWh 65 l 2 h

Mixed Fabrics 40 °C 4 kg 0,60 kWh 45 l 1 h
Delicates / Silk 30 °C 2 kg 0,25 kWh 35 l _ h
Wool 30 °C 2 kg 0,20 kWh 36 l _ h
sensoFresh î

(Intensity Ù)
sensoFresh î +

sensoFresh Intensity (Ú)
Hygienic Mix î 4 kg 0,61 kWh 44 l 1 _ h
Drum Clean î 0 kg 1,41 kWh 27 l 1 ^ h

Values determined according IEC60456:2010.

* Observed values may deviate from the indicated values due to influence of water pressure, hardness

and inlet temperature, ambient temperature, type, amount and soiling of laundry, detergent used,
fluctuations in power supply and selected additional functions.

** Program setting with maximum spin speed for testing according to AS/NZS2040.1: 2005 and labeling

according to AS/NZS2040.2: 2005 and AS/NZS 6400: 2005 with cold water (20°C).

*** Additional function for label program.

Cottons 60 °C+ ecoPerfect ¦ + Rinse Plus + 1400 rpm is recommended for a normally soiled load.

function

Rinse Plus *** 9 kg 0,73 kWh 77 l 5 _ h

Load Energy

consumption*

1 kg 0,01 kWh 0 l ^ h

1 kg 0,02 kWh 0 l _ h

Water consumption*

Programme duration*

52

J Technical data

Technical data

Technical data

Dimensions:

850 x 600 x 590 mm
(height x width x depth)
Weight:

70 - 85 kg (depending on model)
Mains connection:

Mains voltage 220 - 240 V, 50 Hz
Nominal current 10 A
Nominal power 1900 – 2300 W
Water pressure:

100 - 1000 kPa (1 - 10 bar)

Power consumption when switched
off:

0,12 W
Power consumption when left on:

0,43 W

Technical data en

53

en Technical data

Information for test institute

Items Instruction

Pre-treatment of new
appliance

According to standard AS NZS 2040.1-2005

Washing programme Cottons 60 °C + ecoPerfect + Rinse Plus, 9 kg, 1400 rpm
Testing instructions The dosage of detergent: 12,5g/kg

Age of test loads The average age of test load around 10~20 times is

Loading Procedure The items are loaded into the drum by circle first, then by

No. of Layers Items of garments

External circle sheets, bath towels
Layer1 Tablecloth
Layer2 Shirts, T-shirts, Pillow cases
Layer3 Shorts (all), Wash cloths (all),handkerchiefs (all)
Layer4 Shirts, T-shirts, Pillow cases
Layer5 Tablecloth

Run two empty runs of Cottons 90 °C with 1400 rpm: The
1st run with 50g IEC B detergent and 8g anti sudsing
agent, the 2nd run without detergent and sudsing agent.

AS NZS 2040.2-2005
AS NZ 6400-2005

The dosage of anti sudsing agent: 2g/kg
Add the dry powder detergent into main wash dispenser
before start. After detergent is flushed in add the PBIS
solution and anti-sudsing agent as soon as possible.

recommended to replicate normal use.

layers according to the table and picture below evenly.

54

'UXP

([WHUQDOFLUFOH

/D\HU

/D\HU

/D\HU

/D\HU

/D\HU

([WHUQDOFLUFOH

r Aqua-Stop warranty

Aqua-Stop warranty

Only for appliances with Aqua-Stop

In addition to warranty claims against
the vendor based on the purchase
agreement and to our appliance
warranty, we will provide compensation
under the following conditions:

1. If water damage is caused due to a

fault in our Aqua-Stop system, we
will compensate domestic
customers for the damage caused.

2. The liability guarantee is valid for the

service life of the appliance.

3. It is a prerequisite of all warranty

claims that the appliance with Aqua­Stop must have been installed and
connected correctly in accordance
with our instructions; this also
includes a correctly fitted Aqua-Stop
extension (genuine accessories).
Our warranty does not cover
defective feed lines or fittings
leading to the Aqua-Stop connection
at the tap.

4. Appliances with Aqua-Stop do not

need to be supervised during
operation, nor secured afterwards by
turning off the tap.
The tap only needs to be turned off if
you are away from home for a long
period, e.g. for several weeks'
holiday.

Aqua-Stop warranty en

55

Repair order and advice in the event of faults

GB 0344 892 8999 (Calls charged at local or mobile rate.)
IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)

You can find the contact information for all countries in the attached after-sales service
directory.

BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München
GERMANY

siemens-home.com

0DQXIDFWXUHGE\%6++DXVJHUlWH*PE+XQGHU7UDGHPDUN/LFHQVHRI6LHPHQV$*

*9001205815*

9001205815 (9605)