Siemens WM12Q390GB, wm14q390gb Instructions For Use Manual
1 2 3 4 5
6
End of programme when ...
... Start/Reloadflashes and - ¯- appears on the display panel.
Note: If display panel lighting is switched off, press any button
a Energy
saving mode, page 5.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Select Rinse/Spin.
– Press Start/Re load.
Programmes at lower temperatures:
– Select Rinse/S pin (deactivate Extra Rinse button) or E mpty.
– Press Start/Re load.
Changing the programme if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press Start/Reload. The new programme starts from the beginning.
Reloading laundry if ... apage 5
... Press Start/Reload;§ is displayed on the display panel. If ǯ is lit,
the washing machine door cannot be opened.
Press Start/Reload.
Correct installation according to the separate
installations actions.
Checking the machine
– Never use a damag ed machine!
– Contact cu stomer service!
Connecting the mains plug
Make sure your hands are dr y!
Handle the plug only!
Turning on the tap
Compartment II: detergent for the main wash, water softener,
bleach, stain remover
Sorting and loading laundry
Follow the manufacturer's care information!
Sort laundry according to the label's indications.
And according to type, colour, soiling and temperature.
Do not exceed the maximum load
aPage 7.
Observe important information!aPage 6
Wash laundry of different sizes in the same wash programme.
Close the door. Take care not to trap items of laundry between the washing machine door and
seal.
Add detergent and care products
Measure detergent according:
amount of laundry, soiling, water hardness (ask your water supply company) and
manufacturer's instructions.
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
Your washing machine
Congratulations on having opted for a modern, high-quality domestic appliance
manufactured by S iemens. Thi s washing m achine is distinguis hed by its e conomical
energy consumption.
Each machine that leaves our factory has been inspected thoroughly to ensure that it
functions properly and is in perfect con dition.
For further information on our products, accessories, spares and services, consult our
website www.siemens-home.com or contact any of our customer service centres.
You can find the contact details for your nearest after-sales service here or in the aftersales service directory (depending on model).
– GB 0844 8928999 (calls from a BT landline will be charged at up to 3 pence
per minute. A call set-up fee of up to 6 pence may apply)
– IE 01450 2655
Environmentally friendly waste disposal
All packaging must be disposed of in accordance with environmental guidelines.
This appliance is certified in accordance with European Directive 2002/96/CE on the
waste electrical and electronic equipment (WEEE).
This directive provides the framework for the EU-wide collection and reuse of used
appliances.
Intended use
Contents Page
ʋ Intended use ... .................................................................. ..................1
ʋ Programmes ........................................ ................................................ 1
ʋ Setting and adjustin g the programme .................................... .......3
ʋ Washing ................. ................................................................. .........3/4
ʋ After washing ........ ................................................................. .............4
ʋ Individual settings ...................................................... ....................5/6
ʋ Important informatio n ...................................................... ................. 6
ʋ Overview of progra mmes .......... ...................................................... 7
ʋ Safety instruction s ............................... ..............................................8
ʋ Consumption valu es ............................... ..........................................8
ʋ Care and cleaning ..................................................... ........................9
ʋ Information on the di splay panel ............................ ........................9
ʋ Maintenance ......... ........................................................................... 10
ʋ What to do if ... ................................................................. ...............11
Protection of the environment/Conservation tips
– Always fill the washing machine with a maxim um amount of
laundry for the relevant programme.
– Wash normally soiled laundry without a pre-wash.
– Instead of Cotton
90 °C, choose the programme Cotton 60 °C
with the additional function ecoPerfect
¢
. Comparable cleaning
result was significantly lower energy consump tion.
– Measure the detergent according to the manufacturer's
instructions and water hardness.
– If the laundry is then dried in the tumble dryer, select spin speed
according to instructions of dryer manufacturer.
Preparation
Before the first wash,
run a wash cycle with no laundry in the machine aPage 9.
Setting** and adjusting programmes
Programmes
Detailed overview of programmes
apage 7.
Spin speed can be selected individually, irresp ective of the
selected programme and programm e progress.
Cotton hard-wearing fabrics
+ Prewash hard-wearing fabrics, prewash
Mixed Fabrics Different types of laundry
Rapid 15’ Short programme
Rinse/Spin Laundry washed by hand,Extra Rinse button acti-
vated; if only using the spin cycle, deactivate the button
Empty Drain rinsing water with c(without final spin)
Textile Guard All-weather, sports and outdoor fabrics apage 6
ÿWool Hand/machine washable wool
Delicates Delicate washable fabrics
Easy-Care synthetic fabr ics
Washing
1
2
Removing the washing
Open the washing machine door and remove the washing.
If (without final spin) is active: turn the programme selector to Empty or
select the spin speed.
Choose Start/Reload.
– Remove any foreign objects. Risk of rusting.
– Leave the washing machine door and detergent door open
so that any residual water can evaporate.
Turn the tap off
Not required for Aqua-Stop models aRefer to Installation instructions.
Switching off
Turn the programme selector to Off.
Washing
Compartment ~: Fabric softener, bleach
Compartment I: Detergent for prewash
ʋ for dome stic use only,
ʋ for washing machin e-washable fabrics and
hand-washable wool in detergent solution,
ʋ to be operated with co ld or cold and hot (max. 60 ºC)
drinking water, depending on model, and commerci ally
available detergents and care products which are suitable for use in washing machines.
.
– Do not leave children unattended near the
washing machine.
– The washing machine is not to be used by
children or persons not familiar with the
operating instructions.
– Keep pets away from the washing machine.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Individual settings
ʑ
Option button Finish in
When a programme is selected, its duration is displayed. You can delay the end of the programme before it begins. The
ready in-time can be set in increments of one hour up to a maximum of 24 hours. Press the Finish in button until th e
required number of hours is displayed (h = hour). Choose Start/Reload. Once the programme has begun, no further
adjustment is possible.
ʑ
Spin speed in rpm/ (without final spin)
You can change the displayed spin speed or choose (without final spin, laundry soaks in the last rinsing water,
display panel - - - ). The maximum selectable spin speed depends on the model and which programme is currently
selected.
ʑ
Additional functions aOverview of programm es,page 7
speedPerfect iFor washing in a shorter time with a washing outcome comparable to that of the
standard programme. Maximum load
aOverview of programmes, page 7.
ecoPerfect
¢
For saving energy with a washing performance comparable to that of the standard
programme.
Less Ironing Special spin sequence with subsequent fluffing. Gentle final spin: residual moisture in
the laundry slightly increased.
Extra Rinse Additional rinse cycle. For areas with very soft water or for further enhancing the spin
result.
ʑ
Childproof lock
ª¥in the display panel You can lock the washing machine to prevent the functions you have set from being
changed inadvertently.
To activate: press and hold the Start/Reload button for approx. 5 seconds after the
programme has started. ª
¥ appears in the display panel for approx. 5 seconds, then
the Finish-in time is shown again.
To deactivate: press a nd hold the Start/Reload button for approx. 5 seconds.
Note: If a button is pressed when the childproof lock is active, ª
¥ lights up for
approx. 5 seconds, then the Finish-in time is displayed again.
ª
¥lights up continouously if the programme selector is adjusted when the Childlock
is active.
ʑ
Reloading
§
in the display panel
Press Start/Reload if you want to add additional items of laundry after the programme
has started. The machine checks whether reloading is possible.
§ lits: reloading is possible.
Ç
¯ flashes: wait until § lights.
Note: do not open the door until
§ is lit.
Ç
¯: it is not possibl e to reload .
Note: for safety reasons, the washing machine door remains locked when the water
level and/or temperature is high, or during spinning.
To continue the programme, press the Start/Reload
button.
ʑ
Energy saving mode
The display panel lighting goes out after a few minutes, Start/Reload flashes. Press any button to switch on the lighting.
ʑ
Start/Reload
To start the programme or to subsequently load additional laundry, and to activate/deactiv ate the childproof lock.
Individual settings
z
ʑ
Signal
Important information
Protecting the laundry and the machine
– When determining the dosage of all washing powders, additives and cleaning agents, you must follow the
manufacturer's instructions..
– Empty all poc kets
– Check for metal items (paper-clips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush san d out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, choose the additional function speedPerfect i.
Pre-treat any stains as necessary.
intense wash Load less laundry. Choose a programme with a prewash.
Soaking Load laundry of the same colour.
Pour soaking agent/detergent into compartment II in accordance with the m anufacturer's instructions. Turn th e
programme selector t o Cotton
30 °C and press Start/Reload. After approx. 10 minutes, press Start/Reload to pause
the programme. Once the required soaking time has elapsed, press Start/Relo ad
again to continue the programme, or
select a different programme.
Starch Laundry should not be treated with fabric softener.
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in accordance with the
manufacturer's instructions into fabric softener compartment ~ (rinse first if necessary).
Dyeing / Bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye
manufacturer's in structions . Do not use the washing machine for bleaching clothes.
Textile Guard Laundry must not be treated with fabric softener.
Clean the detergent drawer thoroughly to remove fabric softener residue.
Special detergent and waterproofing agent suitable for machine washing are available from sports shops. Dosage according to
the manufacturer's instructions:
1. Place the special detergent for outdoor clothing in compartment I
I and
2. pour impregnating agent (max. 170 ml) into the ~ compartment.
Set the programme selector to Textile Guard. Set the temperature.
Press Start/Reload. Final treatment of the laundry in accordance with the manufacturer's instructions.
Insert for liquid detergent depending on model
Position the insert for dispensing liquid detergent:
– Remove the detergent drawer completely a page 9
– Slide the insert forwards and click into place.
Do not use the insert (slide upwards): for gel detergents and washing powder,
for programmes with + Prewashand End time option.
Set to o
1 step, the display
panel lights up
press and
hold
+
1 step, release
set to
o
setting the volume*setting the volume* 1 step
* if necessary,
select the function
several times
1.
Activating the mode for
setting the signal
volume
2. Setting the volume for...
Button signals Information signals
direct
3
Detergent drawer with
compartments I, II, ~
Door
Drum
Control panel
Service door
Display panel /
option buttons
Additional functions Start /
Reload
Programme selector for
switching the machine on
and off and for selecting the
programme. Can be turned
in either directio n.
**If ª¥ flashes in the display panel,
the childproof lock is active
aDeactivate childproof lock,
page 5.
Additional functions and option
buttons
aIndividual settings,
page 5.
Press Start/Reload
All buttons are sensitive and need
only to be touched lightly. Press and
hold the Finish in option button for an
automatic run through all setting
options.
Programme selector
1 2 3 4 5
6
Insert for liquid detergent (depending on model) apage 6
1 - 24 Finish in End of programme after ...
Status displays Programme sequence displays:
1ü2c-¯- Wash, rinse, spin, end
without final spin
ª¥Childproof locka p age 5
1 2 3 4 5
6
2
2
7
Overview of programmes aRefer to the table of consumption values on page 8, and advice and warnings on page 6.
Programmes °C max.
Type of laundry
Additional functions; Information
Cotton 30, 40, 60, 90 °C
8 kg/
4 kg*
hard-wearing fabrics, cottons or linen that can be
washed at 90°C
speedPerfect i*, ecoPerfect¢, Less Iron ing, Extra Rinse
+ Prewash 40 °C
Easy-Care
3.5 kg
easy-care cotton, linen, synthetic or blended fabrics
speedPerfect i, ecoPerfect
¢, Less Ironing, Extra Rinse
30, 40 °C
Mixed Fabrics 40 °C co tton or synthetic fabrics
speedPerfecti, ecoPerfect ¢, Less Ironing, Extra Rinse;
different types of laundry can be washed together
Delicates 30 °C
2 kg
for delicate fabrics, e.g., silk, satin, synthetic fibres
or blended fabrics (e.g. curtains)
speedPerfecti, ecoPerfect
¢, Less Ironing, Extra Rinse:
no spin between rinse cycles
ÿ Wool cold, 30 °C hand/machine washable wool
particularly delicate wash programme to avoid shrinkage of laundry;
longer programme breaks (fabrics rest in the detergent solution)
Rapid 15’ 30 °C
synthetic cotton, linen, synthetic fibres or blended
fabrics
short programme of approx. 15 mi nutes,
suitable for lightly soiled laundry
Textile Guard 30 °C 1 kg
washing with subsequent waterproofing of all-
weather, sportswear and outdoor clothing, and
clothing with a weatherproof membrane, waterproof
fabrics
speedPerfecti, ecoPerfect ¢, Ext ra Rinse;
more information aboutthe textile guard function a page 6,
reduced final spin at intervals
Additional programmes Rinse/Spin, Empty
* reduced load with additional function speedPerfecti.
For programmes without prewash, add detergent to compartment II. For prewash programmes, distribute the detergent between compartments I and II.
9202 / 9000748346
9000748346
WM14Q360GB /...
Siemens Electrogeräte GmbH
CarläWery Str. 34
81739 Munich / Germany
8
Safety instructions
– Carefully read the instruction manual and the information enclosed, a nd act accordingly.
– Keep the machine's documentation for future reference.
Risk of electric shock! – Never pull the cable to disconnect the mains plug!
– Never insert/disconnect the mains plug with damp hands.
Danger to life! For worn-out appliances:
– Disconnec t the mains plug.
– Sever the mains cable and discard along with the plug.
– Destroy the loc k on the washing machine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation! – Keep packaging, film and packaging parts out of the reach of children.
Risk of poisoning! – Keep detergents and care products out of the reach of children.
Risk of explosion! – Items of laundry p retreated with cleaning agents containing solvents, e.g. stain
remover/cleaning solvent may lead to an explosion after being loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury! –The washing machine door may become very hot.
– Be careful when d raining hot detergent solution.
– Do not clim b onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
– Be careful when o pening the detergent drawer while the machine is in operation.
Consumption values depending on model
Programme Load Electricity*** Water***
Programme
duration***
Cotton 30 °C* 8 kg 0.40 kWh 68 l 145 min
Cotton 40 °C* 8 kg 1.05 kWh 68 l 155 min
Cotton60 °C* 8 kg 1.15 kWh 68 l 165 min
Cotton90 °C 8 kg 2.30 kWh 80 l 155 min
Easy-Care 40 °C* 3.5 kg 0.64 kWh 55 l 103 min
Mixed Fabrics 40 °C 3.5 kg 0.54 kWh 47 l 6 0 min
Delicates 30 °C 2 kg 0.19 kWh 34 l 41 min
Wool 30 °C* 2 kg 0.17 kWh 39 l 40 min
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
Programme
Additional
function
Load
Annual energy
consumption
Annual water
consumption
Cotton40/60 °C
ecoPerfect
¢**
8/4 kg 179 kWh 8700 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
***The values deviate from the indicated values depending on water pressure, hardness, an d inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected addition al
functions.
9
Care and cleaning
Before the first wash
Do not put laundry in the machine! Turn on the tap. Put into compartment II:
– approx. 2 litres of water
– detergent (measure according to the manufacturer's instructions for lightly soiled laundry and water hardness)
Turn the programme selector to Cotton 60 °C, addi tional func tion
speedPerfect iand press Start/Reload. At the end of
the programme, turn the programme selector to
Off.
Machine housing, control panel
– Remove deterg ent and cleaning a gent residue.
– Wipe with a soft, damp cloth.
– Do not wash the machine with a jet of water!
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down and remove draw er completely.
2. To remove the insert: press upwards from b elow with your finger.
3. For models with insert for liquid detergent :Slide the insert upwards and remo ve it from the back.
4. Clean the detergent dispenser tray and inserts with water and a brush and dry them.
5. Attach the insert and engage (connect the cylinder to the guide pin).
6. Push in the detergent drawer.
Leave the detergent drawer open so that any residual wat er can evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
For rust stains, use chl orine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine!
This will not be necessary if the correct dosage of detergent is used. If it is, descale the appl iance according to the
manufacturer's instructions. Descaling products can be acquired on the website or from customer services aInstallation
instructions.
Emergency release e.g. in the event of a power cut
The programme continues to run wh en the power has be en restored. However, if the laundry has t o be removed, the
washing machine door can be opened as follows:
Risk of scalding!
The detergent solution and laundry may be hot. Let it cool.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the dete rgent soluti on apage 10.
3. Pull the emergency release downwards with a tool and release.
The washing machine door can then be opened.
Information on the display panel depending on mod el
§:³±Close the washing machine door properly; laundry may be caught.
§:³Å,
§
: É
Turn on the (cold water) tap fully, supply hose kinked or trapped;
Clean the filter apage 10, water pressure too low.
§:³µ– Detergent solution pump blocked; Clean the detergent solution pump apage 10.
– Drainage hose / waste pipe blocked; Clean the drainage hose at the siphon apage 10.
– Heavy foam build-up apage 11, status indicator 1 flashes.
§: ´Water in the base tub, appliance leaking. Call customer services!
©:³¯– Open the (hot water) tap fully.
– Inlet hose kinked/trapped.
– Water pressure too low. Clean the filter apage 10 .
– Hot water hose not connected; appliance will operate using cold water only. Ignore information, only for first
wash cycle.
ª¥Childproof lock activated: to deactivate apage 5.
– Risk of electri c shock! Disconnect the mains plug.
– Risk of explosion! Do not use so lvents.
9 10
Maintenance
Detergent solution pump
Turn the programme selector to Off and disconnect
the mains plug.
1. Using a screwdriver or the insert for liquid detergent
(depending on model), open and remove the service flap.
2. Remove the folding gutter and place a large enough container underneath.
3. For models with a drainage hose: Remove the drainage hose from the retainer and pull it
from the housing.
Remove the sealing cap, allow the detergent solution to flow out into the container. Replace
the sealing cap and place the drainage hose in the retainer.
3* F or models without a drainage hose: Carefully uns crew the pump cover 180° or until the
detergent solution begins to flow out on the folding gutter. When the container is full, close
the pump cover and empty the container. Repeat the above steps until all the detergent
solution has completely drained out.
4. Carefully unscrew the pump cover (there may be residual water).
5. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
6. Replace the pump cover and screw it tightly.
7. Return the drainage hose (depending on model) and the folding gutter to their start position.
8. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 2 litres of water into compartment II and then start the Empty programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock!
Do not immerse the Aqua-Stop safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except Rinse/Spin // Empty).
3. Choose Start/Reload. Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-S ecure models:
Remove the hose on the rear of the appliance.
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
– Risk of burning!
Allow the detergent solution to cool.
– Turn off the tap.
11
What to do if...
ʑ
Water is leaking out – Attach/replace the drainage hose correctly.
– Tighten the screw connection o f the supply hose.
ʑ
No water supply.
Detergent not dispensed.
– Start/Reload not selected?
– Tap not turned on?
– Filter blocked? Clean the filter apage 10.
– Supply hose kinked or trapped?
ʑ
The appliance door will not
open.
– Safety function active. Programme stopped? apage 4.
– (without final spin) selected? apage 3, 4.
– Can be opened by emergenc y release only? apage 9.
– Door locked after the washing machine is switched off: Switch on the washing
machine and wait for 5 seconds.
ʑ
The selected programme does
not start.
– Start/Reloador Finish in t ime selected?
– Wa shing mach ine door clo sed?
– Childproof lock acti ve? Deactivate apage 5.
ʑ
Detergent solution is not
drained.
– (without final spin) selected? apage 3, 4.
– Clean the detergent solution pump apage 10.
– Clean the waste pipe and/or drainage hose.
ʑ
No water can be seen in the
drum.
– Not a fault. Water remains inside below the visible area.
ʑ
Spin result not satisfactory.
Laundry wet/too damp.
– Not a fault. Spin control system has stopped the spin cycle. Uneven d istribution of
laundry.
Distribute large and small items of laundry evenly in the drum.
– Less Ironing selected? apage 5.
– Selected sp eed too low? apage 5.
ʑ
Programme duration changes
suddenly during operation.
– Not a fault. The program time can vary according to the distribution of laundry, with
it therefore being possible for the display panel to show adjustments in the
duration.
ʑ
Spin cycle performed several
times.
– Not a fault. The balance control system has detected an imbalance and is
attempting to redress this by repeating the spin.
ʑ
Residual water in the
compartment for care pr oducts.
– Not a fault: th e action of the care product is not affected.
– Clean the compartment if necessary apage 9.
ʑ
Odour formation in the washing
machine.
– Run programme Cotton90 °C without laundry. Use standard detergent.
ʑ
Status display 1 flashing.
Appliance has detected a
detergent overload.
– Too much deterg ent used?
If foam is escaping from the detergent drawer: mix 1tablespoon of fabric softener
with ½ litre of water and pour into compartment II (not with outdoor or down
fabrics).
– Reduce the detergent dosage for th e next wash cycle.
ʑ
Intense noise formation,
vibrations and "wandering"
during the spin cycle.
– Are the appliance feet fixed?
Secure the appliance feetaInstallation instructions.
– Transportation safety devices removed?
Remove transportation safety devices aInstallation instructions .
ʑ
Display panel/indicator lamps
remain turned off while the
machine is working.
– Energy-saving mode apage 5.
– Power cut?
– Fuses triggered? Reset/change the fuse.
– If the fault occurs repeatedly, call customer services.
ʑ
Programme sequence longer
than usual.
– Not a fault. Unbalanced load detection system adjusts imbalance by repeatedly
distributing the laundry.
– Not a fault: foam detection system active; adds an additional rinse cycle.
ʑ
Detergent residues on the
laundry.
– Occasionally, phosphate-free detergents contain water-insoluble residues.
– Select Rinse/S pin or brush out the laundry after washing.
If you cannot correct a fault yourself or if a repair is necessary:
– Turn the progra mme selector to Off and remove the mains plug from the so cket.
– Turn off the water supply and call customer services aInstallation instructions.
Instructions for use
Washing
Machine
Observe the safety
instructions on
page 8!
Read these instructions and the separate in stallation
instructions before operating the washing m achine.
en
Clean the interior, pump cover thread and pump housing (the impeller in the detergent
Clean the interior, pump cover thread and pump housing (the impeller in the detergent
Clean the interior, pump cover thread and pump housing (the impeller in the detergent
Clean the interior, pump cover thread and pump housing (the impeller in the detergent
Clean the interior, pump cover thread and pump housing (the impeller in the detergent
Clean the interior, pump cover thread and pump housing (the impeller in the detergent
Clean the interior, pump cover thread and pump housing (the impeller in the detergent
Clean the interior, pump cover thread and pump housing (the impeller in the detergent
Clean the interior, pump cover thread and pump housing (the impeller in the detergent
Clean the interior, pump cover thread and pump housing (the impeller in the detergent
6.6.8.
8.
1 2
Correct installation acco rding to the separate
installations actions.
Checking the machine
– Never use a damaged machine!
– Contact customer service!
Connecting the mains plug
Make sure your han ds are dry!
Handle the plug only!
Turning on the tap
Compartment II: detergent for the main wash, water softener,
bleach, stain rem over
Close the door. Take care not to trap items of laund
Your washing machine
Congratulations on having opted for a modern, high-quality domestic appliance
manufactured by Siemens. This washing machine is distinguished by its economical
energy co nsumption.
Each machine that leaves our factory has been inspected thoroughly to ensure that it
functio ns properl y and is in perfect co ndition.
For further infor mation on our products, acce ssories, spares and services, co nsult our
website www.siemens-home.com or contact any of ou r customer service centres.
You can find the contact details for your nearest after-sales service here or in the aftersales service directory (depending on model).
– GB 0844 8928999 (calls from a B T landline will be charged at up to 3 pence
per minute. A call set-up fee of up to 6 pence may apply)
– IE 01450 2655
Environmentally friendly waste disposal
All packaging must be disposed of in accordance with environmental guidelines.
This appliance is certified in accordance with European Directive 2002/96/CE on the
waste electrical and electronic equipment ( WEEE).
This directive provides the framework for the EU-wide collecti on and reuse of used
appliances.
Intended use
Contents Page
ʋIntended use ............... ....................... ................... ....................... ....... 1
ʋProgramm es .... ..................................... ............................................... 1
ʋSetting and adjusting the programme ........................................... 3
ʋWashing ...... ....................... .......................................... ....................3/4
ʋAfter washi ng .................... .................. ........................ ....................... .4
ʋIndividual settings .......................................... ................................5/6
ʋImportant in formation ........................ ............................................... 6
ʋOverview of programmes .................................. ....................... ....... 7
ʋSafety instru ctions ......................................... ....................... ............. 8
ʋConsumption values ......................................................................... 8
ʋCare and cle aning ....................... .................. ....................... ............. 9
ʋInformati on on the display panel .......... .................. ....................... .9
ʋMaintenance ..................... .................. ........................ ..................... 10
ʋWhat to do if ... ................................................................................ 11
Protection of the environment/Conservation tips
– Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
– Wash no rmally soiled laundry without a pre-wash.
– Instead of Cotton
90 °C, choose the programme Cotton 60 °C
with the additional function ecoPerfect
¢
. Comparable cleaning
result was significantly lower energy consumption.
– Measure the detergent according to the manufacturer's
instructio ns and water hardnes s.
– If the laundry is then dried in the tumble dryer, select spin speed
according to instructions of dry er manufacturer .
Preparation
Programmes
Detailed overview of programmes
a
page 7.
Spin speed can be selected individually, irrespective of the
selected programme and programme progre ss.
Cotton hard-wearing fabrics
+ Prewas h hard-wearing fabrics, prewash
Mixed Fabrics Different types of laundry
Rapid 15’ Short programme
Rinse/Spin Laundry washed by hand, Extra Rinse button acti-
vated; if only using the spin cycle, deactivate the button
Empty Drain rinsing water with c(without final spin)
Textile Guard All-weather, sports and outdoor fabrics apage 6
ÿ Wool Hand/machine washable wool
Delicates Delicate washable fabrics
Easy-Care synthetic fabrics
Compartment ~: Fabric sof tener, bleach
Compartment I: Deterge nt for prewash
ʋfor domestic use only,
ʋfor washing ma chine-washable fabrics and
hand-washable wool in detergent solution,
ʋto be operated with cold or cold and hot (max. 60 ºC)
drinking water, d epending on model, an d commercially
available detergents and care products which are suitable for us e in washing machines.
.
– Do not leave children unattended near the
washing machin e.
– The washing machine is not to be used by
children or persons not familiar with the
operating instr uctions.
– Keep pets away from the washing machine.
Display panel /
option buttons
Additional functions
Programme selector for
switching the machine on
and off and for selecting the
progra mme. Can be turned
in eit her direct ion.
Programme selector
1 2
Insert for liq uid deterg ent (depe nding on model) apage 6
1 - 24 Finish in
End of programme after ...
Status displays Programme sequence displays:
1ü2c- ¯-
Wash, rinse, spin, end
without final s pin
ª¥Childproof lock
a
1 2
Loading...