Siemens SITRANS T4200, SITRANS TH300, SITRANS TH200, SITRANS TH100 Operating Instructions Manual
SITRANS SENSOR HEAD MOUNT TEMPERATURE TRANSMITTERS
MODELS: TH100 & TH200 & TH300 & TH400
PRODUCT INSTRUCTION MANUAL V1.0
MAY 2016
201 SOUTH HOUSTON AVE.
TULSA, OK 74127
PHONE (918) 584-4700
WWW.ERNIEGRAVES.COM
SITRANS TH200/TH300
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
SITRANS T
Temperature transmitter
SITRANS TH200/TH300
Operating Instructions
7NG3211-1*N00 SITRANS TH200 7NG3212-0*N00
SITRANS TH300
_________________
Introduction
_________________
General safety notes
_________________
Description
_________________
Installation
_________________
Connecting
_________________
Operation
_________________
Functional safety
_________________
Commissioning
_________________
Functions
_________________
Service and maintenance
_________________
Technical data
_________________
Dimension drawings
__________________
Spare parts and accessories
_________________
Appendix
_________________
List of abbreviations
1
2
3
4
5
6
7
8
9
10
11
12
13
A
B
06/2010
A5E00393069-03
Legal information
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.
CAUTION
without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.
NOTICE
indicates that an unintended result or situation can occur if the corresponding information is not taken into
account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation for the specific task, in particular its warning notices and
safety instructions. Qualified personnel are those who, based on their training and experience, are capable of
identifying risks and avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be adhered to. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights of the
owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY
order number: A5E00393069
Ⓟ 10/2010
Copyright © Siemens AG 2010.
Technical data subject to change
Loading...