How it Works
Siemens
Loading...
S
Loading...
Loading...
SITOP PSU100L 6EP1336-1LB00
User Manual
58 pgs2.38 Mb0
Table of contents
Loading...

Siemens SITOP PSU100L 6EP1332-1LB00, SITOP PSU100L 6EP1333-1LB00, SITOP PSU100L 6EP1336-1LB00, SITOP PSU100L 6EP1334-1LB00 User Manual

SITOP power supply

SITOP PSU100L

Manual
08.2016
C98130

Overview

Safety instructions
1
Description, device design, dimension drawing
2
Mounting/removal
3
Mounting position, mounting clearances
4
Installation
5
Technical data
6
Safety, approvals, EMC
7
Ambient conditions
8
Applications
9
Environment
10
Service & Support
11
-1LB00
-1LB00
-1LB00
-A7603-A1-2-7629
A
Siemens AG Division Process Industries and Drives Postfach 48 48 90026 NÜRNBERG GERMANY
C98130-A7603-A1-2-7629
Ⓟ
Copyright © Siemens AG 2016. All rights reserved
Legal information Warning notice system
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
may
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
Qualified Personnel
personnel qualified
Proper use of Siemens products
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
Disclaimer of Liability
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger.
indicates that death or severe personal injury
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage.
result if proper precautions are not taken.
The product/system described in this documentation may be operated only by task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems.
Note the following:
documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
for the specific
08/2016 Subject to change
Overview
Description
The 1-phase SITOP PSU100L from the SITOP lite product line is the power supply series to address basic requirements in the industrial environment. It offers all of the important functions at a favorable price – and does not compromise when it comes to quality and reliability.
The key benefits of the product include:
● 1-phase input voltage range with manual switchover
● Narrow design
● Good efficiency
● Green LED for "24 V O.K."
● Can be connected in parallel
● No lateral installation clearances required
● Ambient temperature from 0 °C to 60 °C (exception, 6EP1336-1LB00: 0 °C to 70 °C)
(from 45 °C with derating)
● Cooling through natural convection
● Short circuit and overload protection
● Certification according to CE and cULus
SITOP PSU100L Manual, 08.2016, C98130-A7603-A1-2-7629
3
Overview
Ordering data
Regulated power supply unit SITOP PSU100L
Type
Order number
Output, 24 VDC/5 A
Output, 24 V DC/10 A
Output, 24 V DC/20 A
The following device options are available:
Input, 120/230 V AC Output, 24 V DC/2.5 A Input, 120/230 V AC
Input, 120/230 V AC
Input, 120/230 V AC
6EP1332-1LB00
6EP1333-1LB00
6EP1334-1LB00
6EP1336-1LB00
SITOP PSU100L
4 Manual, 08.2016, C98130-A7603-A1-2-7629
Table of contents
Overview................................................................................................................................................. 3
1 Safety instructions ................................................................................................................................... 7
2 Description, device design, dimension drawing........................................................................................ 9
3 Mounting/removal ................................................................................................................................. 19
4 Mounting position, mounting clearances ................................................................................................ 21
5 Installation ............................................................................................................................................ 31
6 Technical data ...................................................................................................................................... 33
2.1 Device description ..................................................................................................................... 9
2.2 Connections and terminal designation.................................................................................... 10
2.3 Potentiometer .......................................................................................................................... 12
2.4 Status displays and signaling ................................................................................................. 13
2.5 Voltage selector switch ........................................................................................................... 14
2.6 Block diagram ......................................................................................................................... 15
2.7 Dimensions and weight ........................................................................................................... 16
4.1 Standard mounting position .................................................................................................... 21
4.2 Other mounting positions ........................................................................................................ 23
4.2.1 6EP1332-1LB00 ...................................................................................................................... 23
4.2.2 6EP1333-1LB00 ...................................................................................................................... 25
4.2.3 6EP1334-1LB00 ...................................................................................................................... 27
4.2.4 6EP1336-1LB00 ...................................................................................................................... 29
5.1 Line-side connection ............................................................................................................... 31
5.2 Output-side connection ........................................................................................................... 32
6.1 Input ........................................................................................................................................ 33
6.2 Output ..................................................................................................................................... 34
6.3 Efficiency ................................................................................................................................. 38
6.4 Closed-loop control ................................................................................................................. 40
6.5 Protection and monitoring ....................................................................................................... 40
6.6 MTBF ...................................................................................................................................... 40
6.7 Mechanical system ................................................................................................................. 41
6.8 Dimension drawing ................................................................................................................. 41
SITOP PSU100L Manual, 08.2016, C98130-A7603-A1-2-7629
5
Table of contents
7 Safety, approvals, EMC ........................................................................................................................ 43
8 Ambient conditions ................................................................................................................................ 47
9 Applications .......................................................................................................................................... 49
10 Environment ......................................................................................................................................... 55
11 Service & Support ................................................................................................................................. 57
7.1 Safety ..................................................................................................................................... 43
7.2 Test voltage ............................................................................................................................ 44
7.3 Approvals ............................................................................................................................... 45
7.4 EMC ....................................................................................................................................... 45
9.1 Parallel connection to increase power rating ......................................................................... 49
9.2 Parallel connection for redundancy ....................................................................................... 51
9.3 Series connection for increased voltage ................................................................................ 52
9.4 Protection against short-time voltage dips ............................................................................. 53
SITOP PSU100L
6 Manual, 08.2016, C98130-A7603-A1-2-7629
1
WARNING
Correct handling of the devices
When operating electrical devices, it is inevitable that certain components will carry dangerous voltages.
Therefore, failure to handle the units properly can result in death or serious physical injury as well as extensive property damage.
Only appropriately qualified personnel may work on or in the vicinity of this equipment.
Perfect, safe, and reliable operation of this equipment is dependent on proper transportation, storage, installation and mounting.
Before installation or maintenance work can begin, the system's main switch must be switched off and measures taken to prevent it being switched on again.
If this instruction is not observed, touching live parts can result in death or serious injury.
SITOP PSU100L Manual, 08.2016, C98130-A7603-A1-2-7629
7
Safety instructions
SITOP PSU100L
8 Manual, 08.2016, C98130-A7603-A1-2-7629
2
2.1

Device description

①
AC input
②
DC output
③
Potentiometer U
out
④
Indicator light (24 V O.K.)
⑤
Voltage selector switch
⑥
DIN rail slider
⑦
Natural convection
⑧
Clearance above/below
SITOP PSU100L is a primary-clocked power supply for connection to a 1-phase AC line supply. An electronically regulated DC voltage that can be set via a potentiometer is available at the output of the device. The output of the device is isolated, no-load proof and short-circuit proof. The LED display is used to signal the operating state.
SITOP PSU100L Manual, 08.2016, C98130-A7603-A1-2-7629
Figure 2-1 Design (example, 6EP1334-1LB00)
9
Description, device design, dimension drawing
2.2
Connections and terminal designation
Note
UL requirement: Use suitable copper cables that are designed for operating temperatures of at least 65
Connections and terminal designations
①
②
②
Do not subject the end stop to higher loads
Terminal data for 6EP1332-1LB00, 6EP1333-1LB00 and 6EP-1334-1LB00

2.2 Connections and terminal designation

°C/75 °C.
The line input terminals ① can be used to establish the connection to supply voltage. The output terminals
② are used to connect to the loads to be supplied (see also Section
Installation (Page 31)).
Line input L1, N, PE
Output +
Output –
*1)
Figure 2-2
One screw terminal each
2 screw terminals
2 screw terminals
SITOP PSU100L
10 Manual, 08.2016, C98130-A7603-A1-2-7629
Description, device design, dimension drawing
Do not subject the end stop to higher loads
Terminal data for 6EP1336-1LB00
2.2 Connections and terminal designation
*1)
Figure 2-3
SITOP PSU100L Manual, 08.2016, C98130-A7603-A1-2-7629
11
Description, device design, dimension drawing
2.3
Potentiometer
NOTICE
Thermal overload possible
Note
It is only permissible to use a
The end stop may be subject to a maximum load of 0.04

2.3 Potentiometer

The potentiometer ③ on the front of the device is used to set the output voltage. The output voltage is set to 24 V in the factory, and can be adjusted in the range 22.8 - 26.4 V (for 6EP1336-1LB00 22.8 - 28 V); for example, to compensate voltage drops across long supply lines to the connected load.
Figure 2-4 Potentiometer (example, 6EP1334-1LB00)
When adjusting the output voltage to greater than the rated voltage, the output current must be derated by 4 %/V, or the permissible ambient temperature must be taken into account with 3° C/V.
n insulated screwdriver when actuating the potentiometer.
Nm (0.35 lbf in).
For information on actuating the potentiometer (screwdriver, torque), see Connections and terminal designation (Page 10).
SITOP PSU100L
12 Manual, 08.2016, C98130-A7603-A1-2-7629
Description, device design, dimension drawing
2.4
Status displays and signaling
6EP1332-1LB00 (24 V / 2.5 A) 6EP1333-1LB00 (24 V / 5 A) 6EP1334-1LB00 (24 V / 10 A) 6EP1336-1LB00 (24 V/20 A)
Operating display
LED green for "24 V O.K."
Signaling
6EP1332-1LB00 (24 V / 2.5 A) 6EP1333-1LB00 (24 V / 5 A) 6EP1334-1LB00 (24 V / 10 A) 6EP1336-1LB00 (24 V/20 A)

2.4 Status displays and signaling

LED ④ lights up green
LED ④ off
Figure 2-5 Operating display and signaling (example 6EP1334-1LB00)
Normal operation, output voltage > 20 V ± 0.5 V
No supply voltage
SITOP PSU100L Manual, 08.2016, C98130-A7603-A1-2-7629
13
Description, device design, dimension drawing
2.5
Voltage selector switch
Selector switch for the input voltage range

2.5 Voltage selector switch

Figure 2-6 120 V/230 V voltage selector switch (example, 6EP1334-1LB00)
The selector switch as delivered (factory setting) is in the 230 V position. It must be moved to the appropriate position for operation in the 120 V range. The selector switch can only be actuated in the de-energized state.
SITOP PSU100L
14 Manual, 08.2016, C98130-A7603-A1-2-7629
Description, device design, dimension drawing
2.6
Block diagram
*)
Setting range for 6EP1336-1LB00: 22.6 - 28 V

2.6 Block diagram

Figure 2-7 Block diagram
SITOP PSU100L Manual, 08.2016, C98130-A7603-A1-2-7629
15
Description, device design, dimension drawing
2.7
Dimensions and weight

2.7 Dimensions and weight

Figure 2-8 Dimension drawing 6EP1332-1LB00
Figure 2-9 Dimension drawing 6EP1333-1LB00
SITOP PSU100L
16 Manual, 08.2016, C98130-A7603-A1-2-7629
Description, device design, dimension drawing
6EP1332-1LB00 (24 V/2.5 A)
6EP1333-1LB00 (24 V/5 A)
6EP1334-1LB00 (24 V/10 A)
6EP1336-1LB00 (24 V/20 A)
(W × H × D) in mm
Weight
approx. 0.32 kg
Approx. 0.5 kg
Approx. 0.75 kg
1.65 kg
2.7 Dimensions and weight
Figure 2-10 Dimension drawing 6EP1334-1LB00
Dimensions
SITOP PSU100L Manual, 08.2016, C98130-A7603-A1-2-7629
Figure 2-11 Dimension drawing 6EP1336-1LB00
32.5 × 125 × 120.3 50 × 125 × 120.3 70 × 125 × 120.3 110 × 125 × 125
17
Description, device design, dimension drawing
2.7 Dimensions and weight
SITOP PSU100L
18 Manual, 08.2016, C98130-A7603-A1-2-7629
Loading...
+ 40 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use