Siemens SIRIUS ACT User Manual

Starter Kits –

SIRIUS
Command

SIRIUS ACT with PROFINET

Test our digital communication solution for
the field and the control panel

siemens.com/sirius-act-profinet

Efficient, direct connection of commanding
and signaling devices to the controller and
HMI devices via PROFINET.

There are two Starter Kits to choose:

“Standard Starter Kit”

With standard interface module
and selector switch

Article No. 3SU1900-0XA10-0AA0

Including:

“Safety Starter Kit”

With fail-safe interface module
and EMERGENCY STOP

Article No. 3SU1900-0XB10-0AA0

Including:

Your benefits

• Easy integration into the controller (PLC) via PROFINET

• Reduced wiring costs and less potential for error

• Quick installation with flat ribbon cable and no need for special tools

• Optimal flexibility thanks to modular, plug-in components

• More connection options on the interface module with additional inputs/outputs

• Connection of fail-safe devices up to SIL 3 (such as EMERGENCY STOP) to interface modules (IM F)
via PROFIsafe communication

• No addressing of individual pushbuttons or command points required – only one IP address for up to 21 devices

• Easy replacement of memory modules with no programming knowledge required

• Extended diagnostic and parameterization options and end-to-end engineering when integrated into the TIA Portal

2