Siemens SIMOVERT SLP, SIMOVERT MASTERDRIVE Series Operating Instructions Manual
SIMOVERT MASTERDRIVES
SLP – SIMOLINK Puls Generator
SLP – SIMOLINK Pulse Generator
Betriebsanleitung
Operating Instructions
Ausgabe / Edition: AA GWE-477 764 4070.76 J
Änderungen von Funktionen, technischen Daten, Normen, Zeichnungen und Parametern vorbehalten.
We reserve the right to make changes to functions, technical data, standards, drawings and parameters.
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und
Mitteilung ihres Inhalts ni cht gestattet, soweit ni cht ausdrücklich
zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz.
Alle Rechte vorbehalten, ins besondere für den Fall der
Patenterteilung oder GM-Eintragung.
Wir haben den Inhalt der Druckschrift auf Übereinstimmung mit der
beschriebenen Hard- und Software überprüft. Dennoch können
Abweichungen nicht ausgeschlos sen werden, so daß wir für die
vollständige Übereinstimmung keine Garantie übernehmen. Die
Angaben in dieser Druckschrift werden jedoch regelmäßig überprüft
und notwendige Korrekturen sind in den nachfolgenden A uflagen
enthalten. Für Verbesserungsvorschläge sind wir dankbar
The reproduction, transmi ssion or use of this document or its contents is not permi tted without express written authority. Off enders will
be liable for damages. Al l ri ghts, including rights c reated by patent
grant or registration of a utility m odel or design, are reserved.
We have checked t he contents of this document to ensure that they
coincide with the described hardware and soft ware. However,
differences cannot be completely excluded, so that we do not acc ept
any guarantee for complete conformance. However, the information
in this document is regularly checked and necessary c orrections will
be included in subsequent editi ons . We are grateful for any
recommendations for improvement.
Siemens AG 2001 All ri ghts reserved
SIMOVERT ist ein Warenzeichen von Siemens
SIMOVERT Registered Trade Mark
SIMOLINK Puls Generator 02.2001 Contents
Contents
1 DEFINITIONS AND WARNINGS......................................................................1-1
2 PRODUCT DESCRIPTION...............................................................................2-1
2.1 Description of function.......................................................................................2-2
3 TECHNICAL DATA...........................................................................................3-1
4 INSTALLATION ................................................................................................4-1
4.1 EMC measures..................................................................................................4-1
4.2 Housing .............................................................................................................4-1
5 CONNECTIONS................................................................................................5-1
5.1 Connector X1.....................................................................................................5-1
5.2 Encoder interface X2.........................................................................................5-2
5.3 Fiber-optic cable connection .............................................................................5-5
6 START-UP ........................................................................................................6-1
6.1 Setting the DIL switch........................................................................................6-1
6.2 LED displays......................................................................................................6-2
6.3 SIMOLINK data interface ..................................................................................6-3
Siemens AG GWE-477 764 4070.76 J
SIMOVERT MASTERDRIVES Operating Instructions 1
SIMOLINK Pulse Generator 02.2001 Definitions and Warnings
1 Definitions and Warnings
Qualified personnel
DANGER
WARNING
For the purpose of this documentation and the product warning labels,
a "Qualified person" is someone who is familiar with the installation,
mounting, start-up, operation and maintenance of the product. He or
she must have the following qualifications:
♦ Trained or authorized to energize, de-energize, ground and tag
circuits and equipment in accordance with established safety
procedures.
♦ Trained or authorized in the proper care and use of protective
equipment in accordance with established safety procedures.
♦ Trained in rendering first aid.
indicates an imminently hazardous situation which, if not avoided, will
result in death, serious injury and considerable damage to property.
indicates a potentially hazardous situation which, if not avoided, could
result in death, serious injury and considerable damage to property.
CAUTION
CAUTION
NOTICE
NOTE
used with the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in minor or moderate injury.
used without safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in property damage.
NOTICE used without the safety alert symbol indicates a potential
situation which, if not avoided, may result in an undesirable result or
state.
For the purpose of this documentation, "Note" indicates important
information about the product or about the respective part of the
documentation which is essential to highlight.
Siemens AG GWE-477 764 4070.76 J
SIMOVERT MASTERDRIVES Operating Instructions 1-1
Definitions and Warnings 02.2001 SIMOLINK Pulse Generator
WARNING
NOTE
Hazardous voltages are present in this electrical equipment dur ing
operation.
Non-observance of the warnings can thus result in severe personal
injury or property damage.
Only qualified personnel should work on or around the equipment
This personnel must be thoroughly familiar with all warning and
maintenance procedures contained in this documentation.
The successful and safe operation of this equipment is dependent on
correct transport, proper storage and ins ta l lat ion as well as caref ul
operation and maintenance.
This documentation does not purport to cover all details on all types of
the product, nor to provide for every possible contingency to be met in
connection with installation, operation or maintenance.
Should further information be des ired or should par t ic ular pr ob lems
arise which are not covered sufficiently for the purchaser’s purposes,
the matter should be referred to the local SIEMENS sales office.
The contents of this documentation shall not become part of or modify
any prior or existing agreement, commitment or relationship. The sales
contract contains the entire obligation of SIEMENS AG. The warranty
contained in the contract between the parties is the sole warranty of
SIEMENS AG. Any statements contained herein do not create new
warranties or modify the existing warranty.
GWE-477 764 4070.76 J Siemens AG
1-2 Operating Instructions SIMOVERT MASTERDRIVES
SIMOLINK Pulse Generator 02.2001 Definitions and Warnings
CAUTION
Components which can be destroyed by electrostatic discharge (ESD)
The board contains components which can be destroyed by
electrostatic discharge. These components can be easily destroyed if
not carefully handled. If you have to handle el ectr onic boards , pl eas e
observe the following:
Electronic boards should only be touched when absolutely necessary.
The human body must be electrically discharged before touching an
electronic board.
Boards must not come into contact with highly insulating materials - e.g.
plastic parts, insulated desktops, articles of clothing manufactured from
man-made fibers.
Boards must only be placed on conductive surfaces.
Boards and components should only be stored and transported in
conductive packaging (e.g. metalized plastic boxes or metal
containers).
If the packing material is not conductive, the boards must be wrapped
with a conductive packaging material, e.g. conductive foam rubber or
household aluminum foil.
The necessary ESD protective measures are clearly shown again in the
following diagram :
♦ a = Conductive floor surface
♦ b = ESD table
♦ c = ESD shoes
♦ d = ESD overall
♦ e = ESD chain
♦ f = Cubicle ground connection
b
c
a
Siemens AG GWE-477 764 4070.76 J
SIMOVERT MASTERDRIVES Operating Instructions 1-3
d
e
f
Fig. 1-1 ESD protective measures
f f f
d
f
c
StandingSitting Standi n g / Sitti ng
a
b
c
d
e
a
Loading...