Siemens SCALANCE XB108-2, SCALANCE XB-100 Series, SCALANCE XB108-2(ST), SCALANCE XB108-2(SC), SCALANCE XB116 Operating Instructions Manual
...
SIMATIC NET
Industrial Ethernet switches
SCALANCE XB-100
Introduction
1
Operating Instructions
Safety notices
Description of the device
Installation
Connecting up
Upkeep and maintenance
Technical specifications
Dimension drawings
2
3
4
5
6
7
8
Approvals
A
02/2019
C79000-G8976-C473-03
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be
used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property
damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified
personnel are those who, based on their training and experience, are capable of identifying risks and avoiding
potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended or
approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described.
Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this
publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Siemens AG
Division Process Industries and Drives
Postfach 48 48
90026 NÜRNBERG
GERMANY
C79000-G8976-C473-03
Ⓟ 03/2019 Subject to change
Copyright © Siemens AG 2018 - 2019.
All rights reserved
Table of contents
1 Introduction...................................................................................................................................................5
2 Safety notices ...............................................................................................................................................9
3 Description of the device ............................................................................................................................11
3.1 Properties and functions ........................................................................................................11
3.2 Product overview....................................................................................................................11
3.2.1 Accessories............................................................................................................................12
3.2.2 Spare parts.............................................................................................................................13
3.3 Device views ..........................................................................................................................13
3.3.1 Device view of a SCALANCE XB108-2..................................................................................13
3.3.2 Device view of a SCALANCE XB112.....................................................................................14
3.3.3 Device view of a SCALANCE XB116.....................................................................................14
3.3.4 Device view of a SCALANCE XB124.....................................................................................15
3.4 LED display ............................................................................................................................15
4 Installation ..................................................................................................................................................17
4.1 Safety notices for installation .................................................................................................17
4.2 Mounting on DIN rails.............................................................................................................20
5 Connecting up ............................................................................................................................................23
5.1 Safety when connecting up ....................................................................................................23
5.2 Industrial Ethernet ..................................................................................................................24
5.2.1 Electrical.................................................................................................................................24
5.2.2 Optical ....................................................................................................................................26
5.3 Wiring rules ............................................................................................................................27
5.4 Power supply..........................................................................................................................28
5.5 Functional ground ..................................................................................................................29
6 Upkeep and maintenance...........................................................................................................................31
7 Technical specifications..............................................................................................................................33
7.1 Technical specifications of the SCALANCE XB108-2(SC) ....................................................33
7.2 Technical specifications of the SCALANCE XB108-2(ST).....................................................34
7.3 Technical specifications of the SCALANCE XB112 ...............................................................36
7.4 Technical specifications of the SCALANCE XB116 ...............................................................37
7.5 Technical specifications of the SCALANCE XB124 ...............................................................38
7.6 Cable lengths .........................................................................................................................39
7.7 Switching properties...............................................................................................................39
SCALANCE XB-100
Operating Instructions, 02/2019, C79000-G8976-C473-03 3
Table of contents
8 Dimension drawings ...................................................................................................................................41
A Approvals....................................................................................................................................................45
Index...........................................................................................................................................................53
SCALANCE XB-100
4 Operating Instructions, 02/2019, C79000-G8976-C473-03
Introduction
Purpose of the Operating Instructions
These operating instructions support you when installing and connecting up devices of the
SCALANCE XB-100 product group.
The configuration and the integration of the devices in a network are not described in these
operating instructions.
Validity of the Operating Instructions
These operating instructions apply to the following devices:
● SCALANCE XB108-2(SC)
● SCALANCE XB108-2(ST)
● SCALANCE XB112
● SCALANCE XB116
● SCALANCE XB124
1
Unless mentioned otherwise, the descriptions in these operating instructions refer to all devices
of the SCALANCE XB-100 product group named in the section on validity.
Designations used
Classification Description Terms used
Product line The product line includes all devices and variants of all product groups.
If information applies to all product groups within the product line, the term
SCALANCE X-100 is used.
Product group If information applies to all devices and variants of a product group, the term
SCALANCE XB-100 is used.
Device If information relates to a specific device, the device name is used. e.g. SCALANCE
Further documentation
In the system manuals "Industrial Ethernet / PROFINET Industrial Ethernet" and "Industrial
Ethernet / PROFINET passive network components", you will find information on other
SIMATIC NET products that you can operate along with the devices of this product line in an
Industrial Ethernet network.
There, you will find among other things optical performance data of the communications partner
that you require for the installation.
SCALANCE X-100
SCALANCE XB-100
XB108-2(ST)
SCALANCE XB-100
Operating Instructions, 02/2019, C79000-G8976-C473-03 5
Introduction
You will find the system manuals here:
● On the data medium that ships with some products:
– Product CD / product DVD
– SIMATIC NET Manual Collection
● On the Internet pages of Siemens Industry Online Support:
– Industrial Ethernet / PROFINET Industrial Ethernet System Manual (https://
– Industrial Ethernet / PROFINET Passive Network Components System Manual (https://
SIMATIC NET manuals
You will find the SIMATIC NET manuals here:
● On the data medium that ships with some products:
– Product CD / product DVD
– SIMATIC NET Manual Collection
support.industry.siemens.com/cs/ww/en/view/27069465)
support.industry.siemens.com/cs/ww/en/view/84922825)
● On the Internet pages of Siemens Industry Online Support (https://
support.industry.siemens.com/cs/ww/en/ps/15247).
SIMATIC NET glossary
Explanations of many of the specialist terms used in this documentation can be found in the
SIMATIC NET glossary.
You will find the SIMATIC NET glossary here:
● SIMATIC NET Manual Collection or product DVD
The DVD ships with certain SIMATIC NET products.
● On the Internet under the following address:
50305045 (https://support.industry.siemens.com/cs/ww/en/view/50305045)
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be connected
to an enterprise network or the internet if and to the extent such a connection is necessary and
only when appropriate security measures (e.g. firewalls and/or network segmentation) are in
place.
SCALANCE XB-100
6 Operating Instructions, 02/2019, C79000-G8976-C473-03
Catalogs
Introduction
For additional information on industrial security measures that may be implemented, please
visit
https://www.siemens.com/industrialsecurity (https://www.siemens.com/industrialsecurity)
Siemens’ products and solutions undergo continuous development to make them more secure.
Siemens strongly recommends that product updates are applied as soon as they are available
and that the latest product versions are used. Use of product versions that are no longer
supported, and failure to apply the latest updates may increase customers’ exposure to cyber
threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
https://www.siemens.com/industrialsecurity (https://www.siemens.com/industrialsecurity)
You will find the article numbers for the Siemens products of relevance here in the following
catalogs:
● SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI
● SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog ST 70
● Industry Mall - catalog and ordering system for automation and drive technology, Online
catalog (https://mall.industry.siemens.com/goos/WelcomePage.aspx?regionUrl=/
en&language=en)
You can request the catalogs and additional information from your Siemens representative.
Device defective
If a fault develops, please send the device to your SIEMENS service center for repair. Repairs
on-site are not possible.
Recycling and disposal
The products are low in pollutants, can be recycled and meet the requirements of the WEEE
directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a certified
disposal company for electronic scrap or your Siemens contact (Product return (https://
support.industry.siemens.com/cs/ww/en/view/109479891)).
Note the different national regulations.
Trademarks
The following and possibly other names not identified by the registered trademark sign ® are
registered trademarks of Siemens AG:
SIMATIC NET, SCALANCE, C-PLUG, OLM
SCALANCE XB-100
Operating Instructions, 02/2019, C79000-G8976-C473-03 7
Introduction
SCALANCE XB-100
8 Operating Instructions, 02/2019, C79000-G8976-C473-03
Safety notices
Read the safety notices
Note the following safety notices. These relate to the entire working life of the device.
You should also read the safety notices relating to handling in the individual sections,
particularly in the sections "Installation" and "Connecting up".
CAUTION
To prevent injury, read the manual before use.
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
WARNING
EXPLOSION HAZARD
2
Do not open the device when the supply voltage is turned on.
Safety notices when using the device according to Hazardous Locations (HazLoc) and FM.
If you use the device under HazLoc or FM conditions you must also keep to the following safety
notices in addition to the general safety notices for protection against explosion:
This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-hazardous
locations only.
This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations only.
SCALANCE XB-100
Operating Instructions, 02/2019, C79000-G8976-C473-03 9
Safety notices
SCALANCE XB-100
10 Operating Instructions, 02/2019, C79000-G8976-C473-03
Description of the device
Interface
Number of electrical connectors
Number of optical connectors
XB1 -
3.1 Properties and functions
The SCALANCE XB-100 is an unmanaged Industrial Ethernet- switch with a compact plastic
enclosure. The different versions have electrical and/or optical interfaces. All version are
PROFINET CC-A compliant and can be used in hazardous areas of Zone 2.
Due to the flexible power supply, the IE switches SCALANCE XB-100 are suitable for use in the
industry (24 V DC) and building technology (24 V AC).
3.2 Product overview
Article numbers
Device Description Article number
SCALANCE XB108-2(SC) 8 x 10/100 Mbps RJ45 ports, 2 x 10/100 Mbps SC
ports, multimode fiber-optic cable
SCALANCE XB108-2(ST) 8 x 10/100 Mbps RJ45 ports, 2 x 10/100 Mbps ST/
BFOC ports, multimode fiber-optic cable
SCALANCE XB112 12 x 10/100 Mbps RJ45 ports 6GK5 112-0BA00-2AB2
SCALANCE XB116 16 x 10/100 Mbps RJ45 ports 6GK5 116-0BA00-2AB2
SCALANCE XB124 24 x 10/100 Mbps RJ45 ports 6GK5 124-0BA00-2AB2
6GK5 108-2BD00-2AB2
6GK5 108-2BB00-2AB2
3
Type designation
The type designation of a SCALANCE XB-100 is made up of several parts that have the
following meaning:
Interfaces of devices with optical connectors:
Interface Property
SC 10/100 Mbps SC port, multimode fiber-optic cable, up to 5 km
ST 10/100 Mbps ST/BFOC port, multimode fiber-optic cable, up to 5 km
SCALANCE XB-100
Operating Instructions, 02/2019, C79000-G8976-C473-03 11
Description of the device
3.2 Product overview
Unpacking and checking
WARNING
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to the
specification.
If you use damaged parts, this can lead to the following problems:
● Injury to persons
● Loss of the approvals
● Violation of the EMC regulations
● Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
Components of the product
The following components are supplied with a SCALANCE XB-100:
● One IE switch
● Two 3-terminal blocks for the power supply
3.2.1 Accessories
Accessories
The following accessories are available for SCALANCE XB-100:
Power supply
Component Description Article number
SITOP PSU100C 24V/0.6 V Stabilized power supply
LOGO!Power 24 V/1.3 A Stabilized power supply
6EP1 331-5BA00
Input: 1-phase 100-240 V AC or
110-300 V DC
Output: 24 V DC/0.6 A
6EP1 331-1SH03
Input: 1-phase 100-240 V AC or
110-300 V DC
Output: 24 V DC/1.3 A
You will find additional accessories in the Industry Mall (https://eb.automation.siemens.com/
goos/WelcomePage.aspx?regionUrl=/en&language=en).
SCALANCE XB-100
12 Operating Instructions, 02/2019, C79000-G8976-C473-03
3.2.2 Spare parts
Spare parts
The following spare parts are available for SCALANCE XB-100:
Component Description Article number
Spring-loaded terminal
block, 3-pole
3-pole spring-loaded terminal block to
connect the power supply (24 V AC/DC),
pack of 5
3.3 Device views
3.3.1 Device view of a SCALANCE XB108-2
Description of the device
3.3 Device views
6GK5 980-1CB10-0CA5
The following figure shows an overview of the components of the SCALANCE XB108-2 using
the SCALANCE XB108-2(SC) as an example. The SCALANCE XB108-2(ST) only differs in the
optical interfaces.
① Optical ports with port LEDs
② Power LEDs
③ Redundant power supply with connector for grounding
④ Electrical ports with port LEDs
SCALANCE XB-100
Operating Instructions, 02/2019, C79000-G8976-C473-03 13
Description of the device
3.3 Device views
3.3.2 Device view of a SCALANCE XB112
The following figure shows an overview of the components of the SCALANCE XB112.
① Electrical ports with port LEDs
② Power LEDs
③ Redundant power supply with connector for grounding
3.3.3 Device view of a SCALANCE XB116
The following figure shows an overview of the components of the SCALANCE XB116.
① Electrical ports with port LEDs
② Power LEDs
③ Redundant power supply with connector for grounding
SCALANCE XB-100
14 Operating Instructions, 02/2019, C79000-G8976-C473-03
3.3.4 Device view of a SCALANCE XB124
The following figure shows an overview of the components of the SCALANCE XB124.
① Electrical ports with port LEDs
② Power LEDs
③ Redundant power supply with connector for grounding
Description of the device
3.4 LED display
3.4 LED display
Port LEDs "P"
The port LEDs indicate the status of the ports.
RJ-45 ports
Each RJ-45 port has 2 integrated LEDs.
The green LED shows the status of the link.
LED color LED status Meaning
Green Lit link exists
- Off No link exists
The yellow LED shows the status of data reception.
LED color LED status Meaning
Yellow Flashing Receiving data at port
- Off Not receiving data at port
SCALANCE XB-100
Operating Instructions, 02/2019, C79000-G8976-C473-03 15
Description of the device
3.4 LED display
SC/ST ports
There is an LED for each SC/ST port.
LED color LED status Meaning
Green Lit link exists
Orange Lit Receiving data at port
- Off No link exists
Power LEDs "L1" and "L2" (green LEDs)
The power LEDs show the status of the power supply at connectors L1 and L2.
LED color LED status Meaning
Green Lit Power supply L1 or L2 is connected.
- Off Power supply L1 and L2 are not connected or L1 and L2
<9.6 V.
SCALANCE XB-100
16 Operating Instructions, 02/2019, C79000-G8976-C473-03
Installation
4.1 Safety notices for installation
Safety notices
When installing the device, keep to the safety notices listed below.
WARNING
If a device is operated in an ambient temperature of more than 50 °C, the temperature of the
device housing may be higher than 70 °C. The device must therefore be installed so that it is
only accessible to service personnel or users that are aware of the reason for restricted access
and the required safety measures at an ambient temperature higher than 50 °C.
WARNING
If the device is installed in a cabinet, the inner temperature of the cabinet corresponds to the
ambient temperature of the device.
4
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
WARNING
EXPLOSION HAZARD
Replacing components may impair suitability for Class 1, Division 2 or Zone 2.
WARNING
The device is intended for indoor use only.
WARNING
The device may only be operated in an environment of pollution degree class 2 (cf. IEC
60664-1).
SCALANCE XB-100
Operating Instructions, 02/2019, C79000-G8976-C473-03 17
Loading...