Siemens SCALANCE XB004-1, SCALANCE XB004-1LD, SCALANCE XB005, SCALANCE XB008, SCALANCE XB004-1G Operating Instructions

SCALANCE XB-000

___________________

SIMATIC NET

Industrial Ethernet switches SCALANCE XB-000

Operating Instructions

07/2014

A2B00077300

Introduction

1

Network topologies

2

Description of the device

3

Mounting

4

Connecting up

5

Maintenance and troubleshooting

6

Technical specifications

7

Approvals

8

Dimension drawings

9

-04

Siemens AG Industry Sector Postfach 48 48 90026 NÜRNBERG GERMANY

A2B00077300-04

Ⓟ

Legal information

Warning notice system

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

Qualified Personnel

personnel qualified

Proper use of Siemens products

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

Disclaimer of Liability

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage.

The product/system described in this documentation may be operated only by task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems.

for the specific

Note the following:

documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

07/2014 Subject to change

Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates.

For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit

http://www.siemens.com/industrialsecurity

To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com

50305045 (http://support.automation.siemens.com/WW/view/en/50305045

.

)

.

SCALANCE XB-000

6 Operating Instructions, 07/2014, A2B00077300-04

Introduction

1.2

On the product

What is possible?

Note

It is not possible to use IE switches of the SCALANCE ring because they do not support redundancy.

Note

If devices are supplied over long 24 V power supply lines or networks, measures are necessary to prevent interference by strong electromagnetic pulses on the supply lines. These can result, for example, due to lightning or switching of large inductive load

One of the tests used to attest the immunity of these devices to electromagnetic interference is the "surge immunity test" according to EN 61000 protection for the power supply lines. A suitable device is, for exampl BVT AVD 24 V type no. 918 422 or a comparable protective element.

Manufacturer: DEHN+SÖHNE GmbH+Co.KG Hans Dehn Str.1 Postfach 1640 D Germany

Components of the product

1.2 On the product

The IE switches of the SCALANCE XB-000 product line allow the cost-effective installation of Industrial Ethernet bus and star structures with switching functionality.

With the following IE switches, there are also electrical/optical media transitions:

● SCALANCE XB004-1

● SCALANCE XB004-1LD

● SCALANCE XB004-1G

● SCALANCE XB004-1LDG

XB-000 product line in a redundant

The following components are supplied with a SCALANCE XB-000:

● IE switch SCALANCE XB-000

● 3-pin terminal block (power supply)

● Product information

s.

-4-5. This test requires overvoltage e, the Dehn Blitzductor

-92306 Neumarkt,

SCALANCE XB-000 Operating Instructions, 07/2014, A2B00077300-04

7

Introduction

Accessories

Component

Length

Packaging unit

Order number

Suitable for XB-000 Fast Ethernet

Suitable for XB-000G Gigabit Ethernet

plugs

IE FC Stripping Tool

- 1 6GK1901-1GA00

+

IE FC TP standard cable GP 2x2

- 1 6XV1840-2AH10

+

-

IE FC TP standard cable GP 4x2

- 1 6XV1878-2A

(+)

+

IE FC TP trailing cable

- 1 6XV1840-3AH10

+

-

IE FC TP marine cable

- 1 6XV1840-4AH10

+

-

IE FC TP trailing cable GP

- 1 6XV1870-2D

+

-

IE FC TP flexible cable GP 2x2

- 1 6XV1870-2B

+

-

IE FC TP flexible cable GP 4x2

- 1 6XV1878-2B

(+)

+

IE FC TP FRNC cable GP

- 1 6XV1871-2F

+

-

IE FC TP festoon cable GP

- 1 6XV1871-2S

+

-

IE FC TP food cable

- 1 6XV1871-2L

+

-

IE TP torsion cable

- 1 6XV1870-2F

+

-

with 2x2 SC connectors, pulling aid

FO standard cable GP (50/125)

- 1 6XV1873-2A

+

FO trailing cable (50/125)

- 1 6XV1873-2C

+

FO trailing cable GP (50/125)

- 1 6XV1873-2D

+

FO ground cable (50/125)

- 1 6XV1873-2G

+

1.2 On the product

IE TP Cord RJ-45/RJ-45, CAT 6, TP cable 4x2, fitted with 2 RJ-45

IE FC blade cassettes (5 mm) - 1 6GK1901-1GB01 + +

0.5 m 1 6XV1870-3QE50 + +

1 m 1 6XV1870-3QH10 + +

2 m 1 6XV1870-3QH20 + +

6 m 1 6XV1870-3QH60 + +

10 m 1 6XV1870-3QN10 + +

FO standard cable 50/125, fitted

SCALANCE XB-000

8 Operating Instructions, 07/2014, A2B00077300-04

80 m 1 6XV1873-6AN80 + +

100 m 1 6XV1873-6AT10 + +

150 m 1 6XV1873-6AT15 + +

200 m 1 6XV1873-6AT20 + +

300 m 1 6XV1873-6AT30 + +

Introduction

Component

Length

Packaging unit

Order number

Suitable for XB-000 Fast Ethernet

Suitable for XB-000G Gigabit Ethernet

FO FRNC cable (50/125)

- 1 6XV1873-2B

+

IE FC RJ-45 Plug 180 2x2

- 1 6GK1901-1BB10-2AA0

+

-

IE FC RJ-45 Plug 4x2

- 1 6GK1901-1BB11-2AA0

(+)

+

IE FC RJ-45 Plug 180 2x2

-

10

6GK1901-1BB10-2AB0

+

-

IE FC RJ-45 Plug 4x2

-

10

6GK1901-1BB11-2AB0

(+)

+

IE FC RJ-45 Plug 180 2x2

-

50

6GK1901-1BB10-2AE0

+

-

IE FC RJ-45 Plug 4x2

-

50

6GK1901-1BB11-2AE0

(+)

+

Note

Fo use of 4x2 lines is also possible but not absolutely necessary. These products are indicated by (+).

Unpacking and checking

WARNING

Do not use any parts that show evidence of damage

1.2 On the product

r the devices with Fast Ethernet, you can use cables and connectors with 2x2 lines. The

If you use damaged parts, there is no guarantee that the device will function according to the specification.

If you use damaged parts, this can lead to the following problems:

• Injury to persons

• Loss of the approvals

• Violation of the EMC regulations

• Damage to the device and other components

Use only undamaged parts.

1. Make sure that the package is complete.

2. Check all the parts for transport damage.

SCALANCE XB-000 Operating Instructions, 07/2014, A2B00077300-04

9

Introduction

1.2 On the product

SCALANCE XB-000

10 Operating Instructions, 07/2014, A2B00077300-04

2

Which topologies can be implemented?

Note

Keep to the maximum permitted cable lengths of the devices you are using. You will find the permitted cable lengths in the section "

Star topology

Switching technology allows extensive networks to be set up with numerous nodes and simplifies network expansion.

Using the IE switches of the SCALANCE XB-000 product line, you can implement star topologies.

Technical specifications (Page 43)".

Figure 2-1 Example of an electrical star topology with SCALANCE XB005

SCALANCE XB-000 Operating Instructions, 07/2014, A2B00077300-04

11

Network topologies

Figure 2-2 Example of an electrical/optical star topology with SCALANCE XB004-1

SCALANCE XB-000

12 Operating Instructions, 07/2014, A2B00077300-04

3

3.1

SCALANCE XB-000 overview

XB004-1

XB004-1LD

XB005

XB008

XB004-1G

XB004-1LDG

XB005G

XB008G

SIMATIC environment

+ + + + + + + + Diagnostics LED

+ + + + + + +

+

24 VDC

+ + + + + + +

+

2 x 24 VDC

- - - - - - -

-

operation

PROFINET

C-PLUG

- - - - - - -

-

Ring redundancy with RM

- - - - - - -

-

Passive ring redundancy

- - - - - - - - Standby redundancy

- - - - - - -

-

IRT capability

- - - - - - -

-

Fast learning

- - - - - - -

-

Passive listening

- - - - - - - - Log table

- - - - - - -

-

SNTP + SICLOCK

- - - - - - -

-

XB004-1

XB004-1LD

XB005

XB008

XB004-1G

XB004-1LDG

XB005G

XB008G

Fast Ethernet 10 / 100 Mbps

Fast Ethernet 100 Mbps

1000 Mbps

Gigabit Ethernet 1000 Mbps

Table 3- 1 Overview of the product characteristics

Signaling contact + on-site

Diagnostics: Web, SNMP,

Cut Through - - - - - - - -

Table 3- 2 Overview of the connection options

TP (RJ-45)

Fiber multimode (SC)

- - - - - - - -

4 4 5 8 - - - -

1 0 - - - - - -

Single-mode fiber (SC)

TP (RJ-45) Gigabit Ethernet 10 / 100 /

Fiber multimode (SC)

Fiber single mode (SC)

SCALANCE XB-000 Operating Instructions, 07/2014, A2B00077300-04

0 1 - - - - - -

- - - - 4 4 5 8

- - - - 1 0 - -

- - - - 0 1 - -

13

Description of the device

3.2

Description of the device

3.3

TP ports (twisted pair)

3.3.1

Pin assignment

Pin number

Assignment for SCALANCE XB-000

Assignment for SCALANCE XB-000G

Pin 8

n. c.

D4-

Pin 7

n. c.

D4+

Pin 6

TD-

D2-

Pin 5

n. c.

D3-

Pin 4

n. c.

D3+

Pin 3

TD+

D2+

Pin 2

RD-

D1-

Pin 1

RD+

D1+

Note

TP cords or TP with the RJ

With the IE FC cables and IE FC RJ 100 m is permitted between two devices depending on the cable type.

3.3 TP ports (twisted pair)

With IE switches of the SCALANCE XB-000 product line, the twisted-pair ports are designed as RJ-45 jacks with MDI-X pin assignment (Medium Dependent Interface Autocrossover) of a network component.

SCALANCE XB-000

22 Operating Instructions, 07/2014, A2B00077300-04

-XP cords with a maximum length of 10 m can be connected to the TP port

-45 jack.

-45 plug 180, an overall cable length of a maximum of

Siemens SCALANCE XB004-1, SCALANCE XB004-1LD, SCALANCE XB005, SCALANCE XB008, SCALANCE XB004-1G Operating Instructions

SCALANCE XB-000

Table of contents

On the Operating Instructions

1.2 On the product

SCALANCE XB-000 overview

SCALANCE XB004-1

3.2 Product characteristics

SCALANCE XB004-1LD

SCALANCE XB005

SCALANCE XB008

SCALANCE XB004-1G

SCALANCE XB004-1LDG

SCALANCE XB005G

SCALANCE XB008G

Pin assignment

3.3 TP ports (twisted pair)