Siemens SCALANCE XB-000 Operating Instructions Manual

SCALANCE XB-000

___________________

SIMATIC NET

Industrial Ethernet switches SCALANCE XB-000

Operating Instructions

12/2015

A2B00077300

-06

Introduction

Network topologies

Description of the device

Mounting

Connecting up

Maintenance and troubleshooting

Technical specifications

Approvals

Dimension drawings

Siemens AG Division Process Industries and Drives Postfach 48 48 90026 NÜ

RNBERG

GERMANY

A2B00077300-06

Ⓟ

11/2015 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance a

re required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

SCALANCE XB-000 Operating Instructions, 12/2015, A2B00077300-06

Table of contents

1 Introduction ............................................................................................................................................. 5

1.1 On the Operating Instructions ................................................................................................... 5

1.2 On the product .......................................................................................................................... 7

2 Network topologies ............................................................................................................................... 11

3 Description of the device ....................................................................................................................... 13

3.1 SCALANCE XB-000 overview ................................................................................................ 13

3.2 Product characteristics............................................................................................................ 15

3.2.1 SCALANCE XB004-1.............................................................................................................. 15

3.2.2 SCALANCE XB004-2.............................................................................................................. 16

3.2.3 SCALANCE XB004-1LD ......................................................................................................... 17

3.2.4 SCALANCE XB005 ................................................................................................................. 18

3.2.5 SCALANCE XB008 ................................................................................................................. 19

3.2.6 SCALANCE XB004-1G ........................................................................................................... 20

3.2.7 SCALANCE XB004-1LDG ...................................................................................................... 21

3.2.8 SCALANCE XB005G .............................................................................................................. 22

3.2.9 SCALANCE XB008G .............................................................................................................. 23

3.3 TP ports (twisted pair) ............................................................................................................. 24

3.3.1 Pin assignment ....................................................................................................................... 24

3.3.2 Functions ................................................................................................................................ 25

3.3.3 Insulation between the TP ports ............................................................................................. 26

3.4 FO port (fiber optic) ................................................................................................................. 28

3.4.1 SCALANCE XB004-1.............................................................................................................. 28

3.4.2 SCALANCE XB004-2.............................................................................................................. 29

3.4.3 SCALANCE XB004-1LD ......................................................................................................... 30

3.4.4 SCALANCE XB004-1G ........................................................................................................... 31

3.4.5 SCALANCE XB004-1LDG ...................................................................................................... 32

3.5 LEDs ....................................................................................................................................... 33

4 Mounting ............................................................................................................................................... 35

4.1 Safety notices for installation .................................................................................................. 35

4.2 Types of installation ................................................................................................................ 36

4.3 Fixing onto standard mounting rails ........................................................................................ 37

4.4 Wall mounting ......................................................................................................................... 39

5 Connecting up ....................................................................................................................................... 41

5.1 Power supply .......................................................................................................................... 41

5.1.1 Power supply 24 VAC ............................................................................................................. 41

5.1.2 Power supply 24 VDC ............................................................................................................. 42

Table of contents

SCALANCE XB-000

4 Operating Instructions, 12/2015, A2B00077300-06

5.2 Grounding .............................................................................................................................. 43

5.3 Twisted pair cable .................................................................................................................. 44

5.4 IE FC RJ-45 Plug 180 ............................................................................................................ 44

6 Maintenance and troubleshooting .......................................................................................................... 47

6.1 Possible sources of problems and how to deal with them ..................................................... 47

7 Technical specifications ........................................................................................................................ 49

7.1 SCALANCE XB004-1 ............................................................................................................. 49

7.2 SCALANCE XB004-2 ............................................................................................................. 52

7.3 SCALANCE XB004-1LD ........................................................................................................ 54

7.4 SCALANCE XB005 ................................................................................................................ 57

7.5 SCALANCE XB008 ................................................................................................................ 59

7.6 SCALANCE XB004-1G .......................................................................................................... 61

7.7 SCALANCE XB004-1LDG ..................................................................................................... 63

7.8 SCALANCE XB005G ............................................................................................................. 65

7.9 SCALANCE XB008G ............................................................................................................. 67

8 Approvals ............................................................................................................................................. 69

9 Dimension drawings .............................................................................................................................. 73

Index .................................................................................................................................................... 75

SCALANCE XB-000 Operating Instructions, 12/2015, A2B00077300-06

1.1

On the Operating Instructions

Purpose of the Operating Instructions

These Operating Instructions support you when commissioning networks with the Industrial Ethernet switches of the SCALANCE XB-000 product line.

Validity of the Operating Instructions

These operating instructions are valid for the following devices:

Device

Article number

XB004-1 6GK5 004-1BD00-1AB2

XB004-2

6GK5 004-2BD00-1AB2

XB004-1LD

6GK5 004-1BF00-1AB2

XB005

6GK5 005-0BA00-1AB2

XB008

6GK5 008-0BA00-1AB2

XB004-1G

6GK5 004-1GL00-1AB2

XB004-1LDG

6GK5 004-1GM00-1AB2

XB005G

6GK5 005-0GA00-1AB2

XB008G

6GK5 008-0GA00-1AB2

Further documentation

The "SIMATIC NET Industrial Ethernet Twisted Pair and Fiber Optic Networks" manual contains additional information on other SIMATIC NET products that you can operate along with the IE switches of the SCALANCE XB-000 product line in an Industrial Ethernet network.

You can order the manual "SIMATIC NET Industrial Twisted Pair and Fiber Optic Networks", release 05/2001, using the following order numbers: 6GK1970-1BA10-0AA0 German 6GK1970-1BA10-0AA1 English 6GK1970-1BA10-0AA2 French 6GK1970-1BA10-0AA4 Italian

You will also find this network manual on the Internet pages of Service & Support under the following entry ID: 1172207 (http://support.automation.siemens.com/WW/view/en/1172207

You will find further information in the "System Manual Industrial Ethernet" in the Manual Collection.

You will find further information on the SCALANCE system on the Internet at www.siemens.com/scalance (www.siemens.com/scalance

Introduction

1.1 On the Operating Instructions

SCALANCE XB-000

6 Operating Instructions, 12/2015, A2B00077300-06

Audience

These Operating Instructions are intended for persons who commission networks with the IE switches of the SCALANCE XB-000 product line.

SIMATIC NET glossary

Explanations of many of the specialist terms used in this documentation can be found in the SIMATIC NET glossary.

You will find the SIMATIC NET glossary here:

● SIMATIC NET Manual Collection or product DVD

The DVD ships with certain SIMATIC NET products.

● On the Internet under the following address:

50305045 (http://support.automation.siemens.com/WW/view/en/50305045

)

Security information

Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates.

For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit

http://www.siemens.com/industrialsecurity

To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com

Introduction

1.2 On the product

SCALANCE XB-000 Operating Instructions, 12/2015, A2B00077300-06

1.2

On the product

What is possible?

The IE switches of the SCALANCE XB-000 product line allow the cost-effective installation of Industrial Ethernet bus and star structures with switching functionality.

With the following IE switches, there are also electrical/optical media transitions:

● SCALANCE XB004-1

● SCALANCE XB004-2

● SCALANCE XB004-1LD

● SCALANCE XB004-1G

● SCALANCE XB004-1LDG

Note

It is not possible to use IE switches of the SCALANCE

XB-000 product line in a redundant

ring because they do not support redundancy.

Note

If devices are supplied over long 24 V power supply lines or networks, measures are necessary to prevent interference by strong electromagnetic pulses on the supply lines. These can result, for example, due to lightning or switching of large inductive load

One of the tests used to attest the immunity of these devices to electromagnetic interference is the "surge immunity test" according to EN 61000

-4-5. This test requires overvoltage

protection for the power supply lines. A suitable device is, for exampl

e, the Dehn Blitzductor

BVT AVD 24 V type no. 918 422 or a comparable protective element. For AC operation, for example the blitzductor BVT ALD 60 Art. no. 918409 or a comparable protective element is suitable.

Manufacturer: DEHN+SÖHNE GmbH+Co.KG Hans Dehn

Str.1 Postfach 1640 D-92306 Neumarkt,

Germany

Components of the product

The following components are supplied with a SCALANCE XB-000:

● IE switch SCALANCE XB-000

● 3-pin terminal block (power supply)

● Product information

Introduction

1.2 On the product

SCALANCE XB-000

8 Operating Instructions, 12/2015, A2B00077300-06

Accessories

Component

Length

Packaging unit

Order number

Suitable for XB-000 Fast Ethernet

Suitable for XB-000G Gigabit Ethernet

IE TP Cord RJ-45/RJ-45, CAT 6, TP cable 4x2, fitted with 2 RJ-45

plugs

0.5 m 1 6XV1870-3QE50 + +

IE TP Cord RJ-45/RJ-45, CAT 6, TP cable 4x2, fitted with 2 RJ-45 plugs

1 m 1 6XV1870-3QH10 + +

IE TP Cord RJ-45/RJ-45, CAT 6, TP cable 4x2, fitted with 2 RJ-45

plugs

2 m 1 6XV1870-3QH20 + +

IE TP Cord RJ-45/RJ-45, CAT 6, TP cable 4x2, fitted with 2 RJ-45

plugs

6 m 1 6XV1870-3QH60 + +

IE TP Cord RJ-45/RJ-45, CAT 6, TP cable 4x2, fitted with 2 RJ-45

plugs

10 m 1 6XV1870-3QN10 + +

IE FC Stripping Tool

- 1 6GK1901-1GA00

IE FC blade cassettes (5 mm)

- 1 6GK1901-1GB01

IE FC TP standard cable GP 2x2

- 1 6XV1840-2AH10

IE FC TP standard cable GP 4x2

- 1 6XV1878-2A

(+)

IE FC TP trailing cable

- 1 6XV1840-3AH10

IE FC TP marine cable

- 1 6XV1840-4AH10

IE FC TP trailing cable GP

- 1 6XV1870-2D

IE FC TP flexible cable GP 2x2 - 1 6XV1870-2B + -

IE FC TP flexible cable GP 4x2

- 1 6XV1878-2B

(+)

IE FC TP FRNC cable GP - 1 6XV1871-2F + -

IE FC TP festoon cable GP

- 1 6XV1871-2S

IE FC TP food cable

- 1 6XV1871-2L

IE TP torsion cable

- 1 6XV1870-2F

FO standard cable 50/125, fitted

with 2x2 SC connectors, pulling aid

80 m 1 6XV1873-6AN80 + +

FO standard cable 50/125, fitted

with 2x2 SC connectors, pulling aid

100 m 1 6XV1873-6AT10 + +

FO standard cable 50/125, fitted

with 2x2 SC connectors, pulling aid

150 m 1 6XV1873-6AT15 + +

FO standard cable 50/125, fitted

with 2x2 SC connectors, pulling aid

200 m 1 6XV1873-6AT20 + +

FO standard cable 50/125, fitted

with 2x2 SC connectors, pulling aid

300 m 1 6XV1873-6AT30 + +

FO standard cable GP (50/125)

- 1 6XV1873-2A

FO trailing cable (50/125)

- 1 6XV1873-2C

FO trailing cable GP (50/125)

- 1 6XV1873-2D

FO ground cable (50/125)

- 1 6XV1873-2G

Introduction

1.2 On the product

SCALANCE XB-000 Operating Instructions, 12/2015, A2B00077300-06

Component

Length

Packaging unit

Order number

Suitable for XB-000 Fast Ethernet

Suitable for XB-000G Gigabit Ethernet

FO FRNC cable (50/125)

- 1 6XV1873-2B

IE FC RJ-45 Plug 180 2x2 - 1 6GK1901-1BB10-2AA0 + -

IE FC RJ-45 Plug 4x2

- 1 6GK1901-1BB11-2AA0

(+)

IE FC RJ-45 Plug 180 2x2

6GK1901-1BB10-2AB0

IE FC RJ-45 Plug 4x2

6GK1901-1BB11-2AB0

(+)

IE FC RJ-45 Plug 180 2x2

6GK1901-1BB10-2AE0

IE FC RJ-45 Plug 4x2

6GK1901-1BB11-2AE0

(+)

Note

For the devices with Fast Ethernet, you can use cables and connectors with 2x2 lines. The use of 4x2 lines is also possible but not absolutely necessary. These products are indicated by (+).

Unpacking and checking

WARNING

Do not use any parts that show evidence of damage

If you use damaged parts, there is no guarantee that the device will function according to the specification.

If you use damaged parts, this can lead to the following problems:

• Injury to persons

• Loss of the approvals

• Violation of the EMC regulations

• Damage to the device and other components

Use only undamaged parts.

1. Make sure that the package is complete.

2. Check all the parts for transport damage.

Introduction

1.2 On the product

SCALANCE XB-000

10 Operating Instructions, 12/2015, A2B00077300-06

Electrostatic discharge

NOTICE

Electrostatic sensitive devices (ESD)

Electronic modules contain electrostatic sensitive components

These components can easily be destroyed if handled incorrectly.

Note the following instructions to avoid damage.

• Touch electronic modules only when you absolutely need to work on them.

• If electronic modules need to be touched, the body of the person involved must first be

electrostatically discharged and grounded.

• Do not bring electronic modules in contact with electrically isolating materials such as plastic film, isolating table top pads or clothing made of synthetic fibers.

• Place the modules only on conductive surfaces.

• Pack, store and transport electronic modules and components only in conductive

packaging such as metalized plastic or metal containers, conductive foam or household aluminum foil.

SCALANCE XB-000 Operating Instructions, 12/2015, A2B00077300-06

Switching technology allows extensive networks to be set up with numerous nodes and simplifies network expansion.

Which topologies can be implemented?

Using the IE switches of the SCALANCE XB-000 product line, you can implement star topologies.

Note

Keep to the maximum permitted cable lengths of the devices you are using. You will find the permitted cable lengths in the section "

Technical specifications (Page 49)".

Star topology

Figure 2-1 Example of an electrical star topology with SCALANCE XB005

Network topologies

SCALANCE XB-000

12 Operating Instructions, 12/2015, A2B00077300-06

Figure 2-2 Example of an electrical/optical star topology with SCALANCE XB004-1

SCALANCE XB-000 Operating Instructions, 12/2015, A2B00077300-06

3.1

SCALANCE XB-000 overview

Table 3- 1 Overview of the product characteristics

XB004-1

XB004-2

XB004-1LD

XB005

XB008

XB004-1G

XB004-1LDG

XB005G

XB008G

SIMATIC envi-

ronment

+ + + + + + + + +

Diagnostics LED

+ + + + + + + + +

24 VDC + + + + + + + + +

24 VAC

+ 1) - + 1)

+ 1) - - - -

2 x 24 VDC

- - - - - - - - -

Signaling contact + on-site opera-

tion

- - - - - - - - -

Diagnostics: Web, SNMP,

PROFINET

- - - - - - - - -

C-PLUG - - - - - - - -

Ring redundancy

with RM

- - - - - - - - -

Passive ring

redundancy

- - - - - - - - -

Standby redun-

dancy

- - - - - - - - -

IRT capability

- - - - - - - - -

Fast learning

- - - - - - - - -

Passive listening - - - - - - - - -

Log table

- - - - - - - - -

SNTP +

SICLOCK

- - - - - - - - -

Cut Through

- - - - - - - - -

Note the Hardware version (Page 49).

Description of the device

3.1 SCALANCE XB-000 overview

SCALANCE XB-000

14 Operating Instructions, 12/2015, A2B00077300-06

Table 3- 2 Overview of the connection options

XB004-1

XB004-2

XB004-1LD

XB005

XB008

XB004-1G

XB004-1LDG

XB005G

XB008G

TP (RJ-45) Fast Ethernet 10

/ 100 Mbps

4 4 4 5 8 - - - -

Fiber multimode (SC) Fast Ethernet

100 Mbps

1 2 0 - - - - - -

Single-mode fiber (SC) Fast Ethernet

100 Mbps

0 0 1 - - - - - -

TP (RJ-45) Gigabit Ethernet 10 / 100 / 1000

Mbps

- - - - - 4 4 5 8

Fiber multimode (SC) Gigabit Ethernet

1000 Mbps

- - - - - 1 0 - -

Fiber single mode (SC) Gigabit Ethernet

1000 Mbps

- - - - - 0 1 - -

Description of the device

3.2 Product characteristics

SCALANCE XB-000 Operating Instructions, 12/2015, A2B00077300-06

3.2

Product characteristics

3.2.1

SCALANCE XB004-1

Possible attachments

The SCALANCE XB004-1 has four RJ-45 jacks and an SC socket for the connection of end devices or other network segments.

Figure 3-1 SCALANCE XB004-1

Description of the device

3.2 Product characteristics

SCALANCE XB-000

16 Operating Instructions, 12/2015, A2B00077300-06

3.2.2

SCALANCE XB004-2

Possible attachments

The SCALANCE XB004-2 has four RJ-45 jacks and two SC sockets for the connection of end devices or other network segments.

Figure 3-2 SCALANCE XB004-2

Description of the device

3.2 Product characteristics

SCALANCE XB-000 Operating Instructions, 12/2015, A2B00077300-06

3.2.3

SCALANCE XB004-1LD

Possible attachments

The SCALANCE XB004-1LD has four RJ-45 jacks and an SC socket for the connection of end devices or other network segments.

Figure 3-3 SCALANCE XB004-1LD

Description of the device

3.2 Product characteristics

SCALANCE XB-000

18 Operating Instructions, 12/2015, A2B00077300-06

3.2.4

SCALANCE XB005

Possible connections

The SCALANCE XB005 has five RJ-45 jacks for connection of end devices or other network segments.

Figure 3-4 SCALANCE XB005

Description of the device

3.2 Product characteristics

SCALANCE XB-000 Operating Instructions, 12/2015, A2B00077300-06

3.2.5

SCALANCE XB008

Possible connections

The SCALANCE XB008 has eight RJ-45 jacks for the connection of end devices or other network segments.

Figure 3-5 SCALANCE XB008

Description of the device

3.2 Product characteristics

SCALANCE XB-000

20 Operating Instructions, 12/2015, A2B00077300-06

3.2.6

SCALANCE XB004-1G

Possible attachments

The SCALANCE XB004-1G has four RJ-45 jacks capable of Gigabit and an SC socket for the connection of end devices or other network segments.

Figure 3-6 SCALANCE XB004-1G

Description of the device

3.2 Product characteristics

SCALANCE XB-000 Operating Instructions, 12/2015, A2B00077300-06

3.2.7

SCALANCE XB004-1LDG

Possible attachments

The SCALANCE XB004-1LDG has four RJ-45 jacks capable of Gigabit and an SC socket for the connection of end devices or other network segments.

Figure 3-7 SCALANCE XB004-1LDG

Description of the device

3.2 Product characteristics

SCALANCE XB-000

22 Operating Instructions, 12/2015, A2B00077300-06

3.2.8

SCALANCE XB005G

Possible attachments

The SCALANCE XB005G has five RJ-45 jacks capable of Gigabit for connection of end devices or other network segments.

Figure 3-8 SCALANCE XB005G

Description of the device

3.2 Product characteristics

SCALANCE XB-000 Operating Instructions, 12/2015, A2B00077300-06

3.2.9

SCALANCE XB008G

Possible attachments

The SCALANCE XB008G has eight RJ-45 jacks capable of Gigabit for the connection of end devices or other network segments.

Figure 3-9 SCALANCE XB008G

Description of the device

3.3 TP ports (twisted pair)

SCALANCE XB-000

24 Operating Instructions, 12/2015, A2B00077300-06

3.3

TP ports (twisted pair)

3.3.1

Pin assignment

With IE switches of the SCALANCE XB-000 product line, the twisted-pair ports are designed as RJ-45 jacks with MDI-X pin assignment (Medium Dependent Interface Autocrossover) of a network component.

Pin number

Assignment for SCALANCE XB-000

Assignment for SCALANCE XB-000G

Pin 8

n. c.

D4-

Pin 7

n. c.

D4+

Pin 6

TD-

D2-

Pin 5

n. c.

D3-

Pin 4

n. c.

D3+

Pin 3

TD+

D2+

Pin 2

RD-

D1-

Pin 1

RD+

D1+

Note

TP cords or TP

-XP cords with a maximum length of 10 m can be connected to the TP port

with the RJ

-45 jack.

With the IE FC cables and IE FC RJ

-45 plug 180, an overall cable length of a maximum of

100 m is permitted between two devices depending on the cable type.

+ 54 hidden pages

Siemens SCALANCE XB-000 Operating Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual