Siemens SCALANCE W1788-2IA M12, SCALANCE W1788, SCALANCE W1788-2 M12, SCALANCE W1788-1 M12, SCALANCE W1788-2 M120 EEC Reference Manual

___________________

SIMATIC NET

Industrial Wireless LAN
Approvals SCALANCE W1700

802.11ac

Reference Manual

11/2018

C79000

SCALANCE W1788-x

1

-G8976-C487-02

Siemens AG
Division Process Industries and Drives
Postfach 48 48
90026 NÜRNBERG
GERMANY

C79000-G8976-C487-02

Ⓟ

Copyright © Siemens AG 2018.
All rights reserved

Legal information

Warning notice system

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

Qualified Personnel

personnel qualified

Proper use of Siemens products

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

Disclaimer of Liability

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.

The product/system described in this documentation may be operated only by
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.

Note the following:

documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

for the specific

10/2018 Subject to change

Table of contents

1 SCALANCE W1788-x ............................................................................................................................. 7

1.1 Type designations ..................................................................................................................... 8

1.2 EC declaration of conformity ..................................................................................................... 9

1.2.1 ATEX ....................................................................................................................................... 10

1.2.2 RoHS....................................................................................................................................... 11

1.2.3 RED......................................................................................................................................... 11

1.2.3.1 Protection of health and safety ............................................................................................... 11

1.2.3.2 EMC ........................................................................................................................................ 12

1.2.3.3 Efficient use of the radio spectrum ......................................................................................... 13

1.2.4 Products .................................................................................................................................. 13

1.3 General approvals ................................................................................................................... 14

1.4 National approvals .................................................................................................................. 19

Approvals SCALANCE W1700 802.11ac
Reference Manual, 11/2018, C79000-G8976-C487-02

3

Table of contents

Approvals SCALANCE W1700 802.11ac

4 Reference Manual, 11/2018, C79000-G8976-C487-02

Security information

Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be
connected to an enterprise network or the internet if and to the extent such a connection is
necessary and only when appropriate security measures (e.g. firewalls and/or network
segmentation) are in place.

For additional information on industrial security measures that may be implemented, please
visit https://www.siemens.com/industrialsecurity

Siemens’ products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customers’ exposure
to cyber threats.

.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under https://www.siemens.com/industrialsecurity

.

Approvals SCALANCE W1700 802.11ac
Reference Manual, 11/2018, C79000-G8976-C487-02

5

SCALANCE W1788-x

Approvals SCALANCE W1700 802.11ac

6 Reference Manual, 11/2018, C79000-G8976-C487-02

1

Note
Issued approvals on the type plate of the device

The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been
markings on the type plate.

granted for your product by the

Approvals SCALANCE W1700 802.11ac
Reference Manual, 11/2018, C79000-G8976-C487-02

7