Siemens RUGGEDCOM RX1500, RUGGEDCOM RX1512 Installation Manual
Preface
RUGGEDCOM RX1500
Installation Guide
Introduction
Installing the Device
Communication Ports
Technical Specifications
Dimension Drawings
Certification
1
2
3
4
5
6
02/2016
RC1053-EN-04
RUGGEDCOM RX1500
Installation Guide
Copyright © 2016 Siemens Canada Ltd.
All rights reserved. Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized
except where expressly permitted. Violations are liable for damages. All rights reserved, particularly for the purposes of patent application or
trademark registration.
This document contains proprietary information, which is protected by copyright. All rights are reserved. No part of this document may be
photocopied, reproduced or translated to another language without the prior written consent of Siemens Canada Ltd..
Disclaimer Of Liability
Siemens has verified the contents of this document against the hardware and/or software described. However, deviations between the
product and the documentation may exist.
Siemens shall not be liable for any errors or omissions contained herein or for consequential damages in connection with the furnishing,
performance, or use of this material.
The information given in this document is reviewed regularly and any necessary corrections will be included in subsequent editions. We
appreciate any suggested improvements. We reserve the right to make technical improvements without notice.
Registered Trademarks
RUGGEDCOM™ and ROS™ are trademarks of Siemens Canada Ltd..
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a
world-wide basis.
Other designations in this manual might be trademarks whose use by third parties for their own purposes would infringe the rights of the
owner.
Security Information
Siemens provides products and solutions with industrial security functions that support the secure operation of plants, machines, equipment
and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens' products and solutions
undergo continuous development. Siemens recommends strongly that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept)
and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also
be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity.
To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://
support.automation.siemens.com.
Warranty
Siemens warrants this product for a period of five (5) years from the date of purchase, conditional upon the return to factory for maintenance
during the warranty term. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all
warranties null and void. The warranties set forth in this article are exclusive and are in lieu of all other warranties, performance guarantees
and conditions whether written or oral, statutory, express or implied (including all warranties and conditions of merchantability and fitness for
a particular purpose, and all warranties and conditions arising from course of dealing or usage or trade). Correction of nonconformities in the
manner and for the period of time provided above shall constitute the Seller’s sole liability and the Customer’s exclusive remedy for defective
or nonconforming goods or services whether claims of the Customer are based in contract (including fundamental breach), in tort (including
negligence and strict liability) or otherwise.
For warranty details, visit www.siemens.com/ruggedcom or contact a Siemens customer service representative.
ii
RUGGEDCOM RX1500
Installation Guide
Contacting Siemens
Address
Siemens Canada Ltd.
Industry Sector
300 Applewood Crescent
Concord, Ontario
Canada, L4K 5C7
Telephone
Toll-free: 1 888 264 0006
Tel: +1 905 856 5288
Fax: +1 905 856 1995
E-mail
ruggedcom.info.i-ia@siemens.com
Web
www.siemens.com/ruggedcom
iii
RUGGEDCOM RX1500
Installation Guide
iv
RUGGEDCOM RX1500
Installation Guide
Table of Contents
Table of Contents
Preface ............................................................................................................... vii
Alerts ................................................................................................................................................ vii
Related Documents ............................................................................................................................ vii
Accessing Documentation .................................................................................................................. vii
Training ............................................................................................................................................ viii
Customer Support ............................................................................................................................. viii
Chapter 1
Introduction .......................................................................................................... 1
1.1 Feature Highlights ........................................................................................................................ 1
1.2 Description .................................................................................................................................. 2
Chapter 2
Installing the Device ............................................................................................ 5
2.1 Mounting the Device .................................................................................................................... 5
2.1.1 Mounting the Device to a Rack .......................................................................................... 6
2.1.2 Mounting the Device on a DIN Rail .................................................................................... 7
2.1.3 Mounting the Device to a Panel ......................................................................................... 8
2.2 Connecting Power ........................................................................................................................ 8
2.2.1 Installing/Removing Power Supplies ................................................................................... 9
2.2.1.1 Installing a Power Supply ...................................................................................... 10
2.2.1.2 Removing a Power Supply .................................................................................... 10
2.2.2 Connecting High AC/DC Power ........................................................................................ 11
2.2.3 Connecting Low DCPower ............................................................................................... 12
2.3 Connecting the Failsafe Alarm Relay ........................................................................................... 13
2.4 Grounding the Device ................................................................................................................. 14
2.5 Connecting to the Device ........................................................................................................... 14
2.6 Cabling Recommendations ......................................................................................................... 16
2.6.1 Protection On Twisted-Pair Data Ports .............................................................................. 16
2.6.2 Gigabit Ethernet 1000Base-TX Cabling Recommendations ................................................. 16
Chapter 3
Communication Ports ......................................................................................... 19
3.1 Copper Ethernet Ports ................................................................................................................ 20
3.2 Fiber Optic Ethernet Ports .......................................................................................................... 23
v
Table of Contents
3.3 SFP Optic Ethernet Ports ........................................................................................................... 23
3.4 WAN Modules ............................................................................................................................ 25
3.5 Serial Ports ................................................................................................................................ 27
3.6 Cellular Modem Modules ............................................................................................................ 28
3.7 DDS (Digital Data Services) Modules .......................................................................................... 33
3.8 RUGGEDCOM APE Module ....................................................................................................... 34
3.9 Installing/Removing Modules ....................................................................................................... 35
3.10 Connecting Multiple RS485 Devices .......................................................................................... 36
RUGGEDCOM RX1500
Installation Guide
3.3.1 Installing an SFP Optical Port .......................................................................................... 24
3.3.2 Removing an SFP Optical Port ......................................................................................... 25
3.6.1 Cellular Modem Installation Requirements ......................................................................... 30
3.6.2 Diversity Requirements .................................................................................................... 30
3.6.3 Supported Frequency Bands ............................................................................................ 30
3.6.4 Installing SIM Cards for GSM, EDGE and HSPA+ Cellular Modems .................................... 31
3.9.1 Installing a Module .......................................................................................................... 35
3.9.2 Removing a Module ........................................................................................................ 36
Chapter 4
Technical Specifications ..................................................................................... 39
4.1 Power Supply Specifications ....................................................................................................... 39
4.2 Failsafe Relay Specifications ...................................................................................................... 40
4.3 Copper Serial Port Specifications ................................................................................................ 40
4.4 Copper Ethernet Port Specifications ............................................................................................ 40
4.5 Fiber Optic Ethernet Port Specifications ....................................................................................... 41
4.5.1 10Base-FL/100Base-SX Ethernet Optical Specifications ..................................................... 41
4.5.2 Fast Ethernet (100 Mbps) Optical Specifications ................................................................ 41
4.5.3 Gigabit Ethernet (1 Gbps) Optical Specifications ................................................................ 43
4.6 Cellular Modem Specifications .................................................................................................... 44
4.7 Operating Environment ............................................................................................................... 45
4.8 RUGGEDCOM APE Specifications .............................................................................................. 45
4.9 Mechanical Specifications ........................................................................................................... 45
Chapter 5
Dimension Drawings .......................................................................................... 47
Chapter 6
Certification ........................................................................................................ 49
6.1 Standards Compliance ............................................................................................................... 49
6.2 Agency Approvals ...................................................................................................................... 49
6.3 EMC and Environmental Type Tests ............................................................................................ 50
vi
RUGGEDCOM RX1500
Installation Guide
Preface
This guide describes the RUGGEDCOM RX1500. It describes the major features of the device, installation,
commissioning and important technical specifications.
It is intended for use by network technical support personnel who are responsible for the installation,
commissioning and maintenance of the device. It is also recommended for use by network and system planners,
system programmers, and line technicians.
Alerts
The following types of alerts are used when necessary to highlight important information.
DANGER!
DANGER alerts describe imminently hazardous situations that, if not avoided, will result in death or
serious injury.
Preface
WARNING!
WARNING alerts describe hazardous situations that, if not avoided, may result in serious injury and/or
equipment damage.
CAUTION!
CAUTION alerts describe hazardous situations that, if not avoided, may result in equipment damage.
IMPORTANT!
IMPORTANT alerts provide important information that should be known before performing a procedure
or step, or using a feature.
NOTE
NOTE alerts provide additional information, such as facts, tips and details.
Related Documents
Other documents that may be of interest include:
• ROX II User Guide for the RX1500
Accessing Documentation
The latest user documentation for RUGGEDCOM RX1500 v is available online at www.siemens.com/ruggedcom.
To request or inquire about a user document, contact Siemens Customer Support.
Alerts vii
Preface
RUGGEDCOM RX1500
Installation Guide
Training
Siemens offers a wide range of educational services ranging from in-house training of standard courses on
networking, Ethernet switches and routers, to on-site customized courses tailored to the customer's needs,
experience and application.
Siemens' Educational Services team thrives on providing our customers with the essential practical skills to make
sure users have the right knowledge and expertise to understand the various technologies associated with critical
communications network infrastructure technologies.
Siemens' unique mix of IT/Telecommunications expertise combined with domain knowledge in the utility,
transportation and industrial markets, allows Siemens to provide training specific to the customer's application.
For more information about training services and course availability, visit www.siemens.com/ruggedcom or
contact a Siemens sales representative.
Customer Support
Customer support is available 24 hours, 7 days a week for all Siemens customers. For technical support or
general information, contact Siemens Customer Support through any of the following methods:
Online
Visit http://www.siemens.com/automation/support-request to submit a Support Request (SR) or check
on the status of an existing SR.
Telephone
Call a local hotline center to submit a Support Request (SR). To locate a local hotline center, visit
http://www.automation.siemens.com/mcms/aspa-db/en/automation-technology/Pages/default.aspx.
Mobile App
Install the Industry Online Support app by Siemens AG on any Android, Apple iOS or Windows mobile
device and be able to:
• Access Siemens' extensive library of support documentation, including FAQs and manuals
• Submit SRs or check on the status of an existing SR
• Contact a local Siemens representative from Sales, Technical Support, Training, etc.
• Ask questions or share knowledge with fellow Siemens customers and the support community
viii Training
RUGGEDCOM RX1500
Installation Guide
Introduction
The RUGGEDCOM RX1500 is a cost-efficient, rugged Layer 3 switch and router. The RX1500’s modular and
field replaceable platform can be equipped with WAN, serial, and Ethernet options, making it ideally suited for
electric power utilities, the industrial plant floor, and traffic control systems.
The RX1500 is designed to provide a high level of immunity to electromagnetic interference (EMI) and
heavy electrical surges typical of the harsh environments found in many industrial applications. An operating
temperature range of -40 to 85 °C (-40 to 185 °F) allows the RX1500 to be placed in almost any location.
The following sections provide more information about the RX1500:
• Section 1.1, “Feature Highlights”
• Section 1.2, “Description”
Section 1.1
Chapter 1
Introduction
Feature Highlights
Reliability in Harsh Environments
• Immunity to EMI and high voltage electrical transients
• -40 to 85 °C (-40 to 185 °F) operating temperature (no fans)
• Failsafe output relay for critical failure or error alarming
Physical Ports
• Field replaceable line modules
• Up to 24 100Base-FX ports
• Up to 24 10/100Base-TX ports
• Up to 12 10Base-FL/100Base-SX ports
• Up to 8 Gigabit Ethernet ports
• Up to 24 serial ports
• Up to 4 T1/E1 RJ48C ports or 2 E1 BNC ports
• Up to 2 DDS (Digital Data Services) ports
• Up to 2 cellular SMA antenna ports (HSPA/EVDO)
Universal Power Supply Options
• Dual redundant, modular, hot-swappable power supplies
• Fully integrated power supplies (no external adapters)
• Input voltage ranges: 13-36 VDC and 37-72 VDC or 85-264 VAC and 88-300 VDC for worldwide operability
• CSA/UL 60950-1 safety approved to 85 °C (185 °F)
Feature Highlights 1
Chapter 1
1 2 3 8
6 7
4
5
Introduction
Section 1.2
Installation Guide
Description
The RX1500 features various ports, controls and indicator LEDs on the front panel for connecting, configuring
and troubleshooting the device.
Figure 1: RUGGEDCOM RX1500
1. Management Port 2. RS232 Serial Console Port (DB9) 3. Utility USB Port 4. Port Status LEDs 5. Power Status LEDs 6. Alarm
Indicator LED 7. Lamp Test/Alarm Cut-Off (LT/ACO) Button 8. Compact Flash Card Port
RUGGEDCOM RX1500
• Management Port – This 10/100Base-T Ethernet port is used for system management that is out-of-band from
the switch fabric.
• RS-232 Serial Console Port – The serial console port is for interfacing directly with the device and accessing
initial management functions. For information about connecting to the device via the serial console port, refer to
Section 2.5, “Connecting to the Device”.
• Utility USB Port – Use the USB port to upgrade the ROX II software or install files, such as configuration
files and feature key files. For more information, refer to the RUGGEDCOM ROX II User Guide for the
RUGGEDCOM RX1500.
• Lamp Test/Alarm Cut-Off (LT/ACO) Button – This button performs two functions:
▪ Press and hold this button to test all indicator LEDs
▪ Press and release this button to acknowledge an active alarm
• Power Status LEDs – Indicate the status of the power modules.
▪ I = The power supply is receiving power
▪ O = The power supply is supplying power
• Port Status LEDs – Indicate when ports are active.
▪ Green = OK
▪ Orange = Warning alert
▪ Red = Configuration error
• Alarm Indicator LED – Indicates when an alarm condition exists.
▪ Green = Alarms cleared/acknowledged
▪ Red = Alarm
• Compact Flash Card Port – Houses the 1 GB compact flash card that contains active and backup installations
of RUGGEDCOMROX II, along with the configuration database and other system data.
2 Description
RUGGEDCOM RX1500
Installation Guide
Chapter 1
Introduction
CAUTION!
Configuration hazard – risk of data corruption/loss. Do not open the compact flash card port, unless
specifically instructed to by a Siemens Customer Support representative. The warranty will be void
otherwise. Removing the compact flash card improperly can corrupt configuration data.
Description 3
RUGGEDCOM RX1500
Installation Guide
Chapter 1
Introduction
Description 4
RUGGEDCOM RX1500
Installation Guide
Installing the Device
Installing the Device
The following sections describe how to install the device, including mounting the device, connecting power, and
connecting the device to the network.
WARNING!
Radiation hazard – risk of serious personal injury. This product contains a laser system and is
classified as a CLASS 1 LASER PRODUCT. Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous radiation exposure.
DANGER!
Electrocution hazard – risk of serious personal injury and/or damage to equipment. Before performing
any maintenance tasks, make sure all power to the device has been disconnected and wait
approximately two minutes for any remaining energy to dissipate.
IMPORTANT!
This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall
render all warranties null and void.
Changes or modifications not expressly approved by Siemens Canada Ltd. could invalidate
specifications, test results, and agency approvals, and void the user's authority to operate the
equipment.
Chapter 2
IMPORTANT!
This product should be installed in a restricted access location where access can only be gained by
authorized personnel who have been informed of the restrictions and any precautions that must be
taken. Access must only be possible through the use of a tool, lock and key, or other means of security,
and controlled by the authority responsible for the location.
• Section 2.1, “Mounting the Device”
• Section 2.2, “Connecting Power”
• Section 2.3, “Connecting the Failsafe Alarm Relay”
• Section 2.4, “Grounding the Device”
• Section 2.5, “Connecting to the Device”
• Section 2.6, “Cabling Recommendations”
Section 2.1
Mounting the Device
The RX1500 is designed for maximum mounting and display flexibility. It can be equipped with connectors that
allow it to be installed in a 48 cm (19 in) rack, 35 mm (1.4 in) DIN rail or directly on a panel.
Mounting the Device 5
Chapter 2
Installing the Device
RUGGEDCOM RX1500
Installation Guide
NOTE
For detailed dimensions of the device with either rack, DIN rail or panel hardware installed, refer to
Chapter 5, Dimension Drawings.
The following sections describe the various methods of mounting the device:
• Section 2.1.1, “Mounting the Device to a Rack”
• Section 2.1.2, “Mounting the Device on a DIN Rail”
• Section 2.1.3, “Mounting the Device to a Panel”
Section 2.1.1
Mounting the Device to a Rack
For rack mount installations, the RX1500 can be equipped with rack mount adapters pre-installed at the front or
rear of the chassis. Additional adapters are provided for added stability.
CAUTION!
Vibration hazard – risk of damage to the device. Always use four rack mount adapters (two at the
front of the device and two at the rear) when installing the device in high-vibration or seismically active
locations.
CAUTION!
Electrical/mechanical hazard – risk of damage to the device. Before installing the device in a rack,
make sure of the following:
• When installing the device in a closed or multi-device rack, be aware that the operating ambient
temperature of the rack may be higher than the ambient temperature of the room. Make sure the
rack is installed in a suitable environment that can withstand the maximum ambient temperature
generated by the rack.
• Make sure each device in the rack is separated by at least one rack-unit of space, or 44 mm (1.75
in), to promote convectional airflow. Forced airflow is not required. However, any increase in airflow
will result in a reduction of ambient temperature and improve the long-term reliability of all equipment
mounted in the rack space.
• Do not exceed the maximum number of devices or weight restrictions specified by the rack
manufacturer.
• Do not overload the supply circuit. Refer to the over-current protection and power supply ratings
specified by the rack manufacturer.
• Make sure the rack and all devices have a proper ground-to-Earth connection. Pay particular
attention to power supply connections other than direct connections to the branch circuit (e.g. power
strips).
To secure the device to a standard 48 cm (19 in) rack, do the following:
1. Make sure the rack mount adapters are installed on the correct side of the chassis.
• To make the modules and ports accessible, install the rack mount adapters at the rear of the chassis
• To make the management ports and LEDs accessible, install the rack mount adapters at the front of the
chassis
6 Mounting the Device to a Rack
RUGGEDCOM RX1500
3 3
1 2
3
1
2
2
1
Installation Guide
NOTE
The chassis features multiple mounting holes, allowing the rack mount adapters to be installed up
to 25 mm (1 in) from the face of the device.
Figure 2: Rack Mount Adapters
1. Rear 2. Front 3. Rack Mount Adapter
2. If required, install adapters on the opposite side of the device to protect from vibrations.
3. Insert the device into the rack.
4. Secure the adapters to the rack using the supplied hardware.
Installing the Device
Chapter 2
Section 2.1.2
Mounting the Device on a DIN Rail
For DIN rail installations, the RX1500 can be equipped with panel/DIN rail adapters pre-installed on each side of
the chassis. The adapters allow the device to be slid onto a standard 35 mm (1.4 in) DIN rail.
To mount the device to a DIN rail, do the following:
1. Align the adapters with the DIN rails and slide the device into place.
Figure 3: DIN Rail Mounting
1. Panel/DIN Rail Adapter 2. DIN Rail 3. Screw
Mounting the Device on a DIN Rail 7
Chapter 2
21
1
Installing the Device
2. Install one of the supplied screws on either side of the device to secure the adapters to the DIN rails.
Section 2.1.3
Installation Guide
Mounting the Device to a Panel
For panel installations, the RX1500 can be equipped with panel/DIN rail adapters pre-installed on each side of
the chassis. The adapters allow the device to be attached to a panel using screws.
To mount the device to a panel, do the following:
1. Place the device against the panel and align the adapters with the mounting holes.
RUGGEDCOM RX1500
Figure 4: Panel Mounting
1. Screw 2. Panel/DIN Rail Adapter
2. Install the supplied screws to secure the adapters to the panel.
Section 2.2
Connecting Power
The RX1500 supports dual redundant high AC, high DC and/or low DC power supplies that can be installed in
any combination. The use of two power modules is recommended to provide redundancy and load balancing.
The RX1500 can be equipped with either a screw-type or pluggable terminal block. The screw-type terminal
block is installed using Phillips screws and compression plates, allowing either bare wire connections or crimped
terminal lugs. Use #6 size ring lugs for secure, reliable connections under severe shock or vibration.
8 Mounting the Device to a Panel
RUGGEDCOM RX1500
1
2
Installation Guide
Installing the Device
Chapter 2
DANGER!
Electrocution hazard – risk of serious personal injury or death. The device may have two power
supplies equipped, which may be connected to separate power sources. Make sure all power sources
are off before servicing the power supply terminals.
IMPORTANT!
• In a high AC/DC and low DC (24/48 V) power supply arrangement, the placement of the AC and DC
power supplies is not slot-dependent. Either power module slot can be used for AC or DC power.
• For maximum redundancy in a dual power supply configuration, use two independent power
sources.
• Use only #16 gage copper wiring when connecting terminal blocks.
• The maximum wire length between the terminal block and power source must not exceed 6 m (20 ft)
for 24 V power supplies or 18 m (60 ft) for 48 V power supplies.
• For 125/230 VAC rated equipment, an appropriately rated AC circuit breaker must be installed.
• For 125/250 VDC rated equipment, an appropriately rated DC circuit breaker must be installed.
• It is recommended to provide a separate 20 A circuit breaker for each power supply module.
• Equipment must be installed according to applicable local wiring codes and standards.
The following sections describe how to connect power to the device:
• Section 2.2.1, “Installing/Removing Power Supplies”
• Section 2.2.2, “Connecting High AC/DC Power”
• Section 2.2.3, “Connecting Low DC Power”
Section 2.2.1
Installing/Removing Power Supplies
The RX1500 supports dual redundant AC and/or DC power supplies that can be installed in any combination.
Slots for the removable power modules are located on the rear panel of the device.
Figure 5: Power Module Slots
1. Slot PS1 2. Slot PS2
The following sections describe how to install, remove and connect the power supplies:
• Section 2.2.1.1, “Installing a Power Supply”
• Section 2.2.1.2, “Removing a Power Supply”
Installing/Removing Power Supplies 9
Chapter 2
3
2
1
Installing the Device
Section 2.2.1.1
RUGGEDCOM RX1500
Installation Guide
Installing a Power Supply
To install a power supply, do the following:
NOTE
The power supplies are hot swappable. It is not necessary to disconnect power to the device before
installing or removing a power supply.
1. Remove the blank power module assembly or, if equipped, the currently installed power supply. For
information about removing a power supply, refer to Section 2.2.1.2, “Removing a Power Supply”.
2. Insert the power supply into the empty slot. When power is supplied to the device, the top and bottom LEDs
on the power supply should be green, indicating that power is being received and supplied to the device.
Figure 6: Installing a Power Supply
1. Chassis 2. Power Supply 3. Screws
3. Hand-tighten the screws to secure the power supply.
Section 2.2.1.2
Removing a Power Supply
To remove a power supply, do the following:
NOTE
The power supplies are hot swappable. It is not necessary to disconnect power to the device before
Removing or removing a power supply.
1. Remove the screws that secure the power supply.
2. Pull the power supply from the chassis.
10 Installing a Power Supply
Loading...