s
Circuit Breaker
Interruptor
Disjoncteur
Installation Instructions / Instructivo de Instalación
Item: NEG _ _ _ _ _ _
HEG _ _ _ _ _ _
NEN _ _ _ _ _ _
HEN _ _ _ _ _ _
HES _ _ _ _ _ _
For Use With FrameEG
Para Usar Con Caja Base EG
Hazardous Voltage.
Hazardous Voltage.
Will cause death or serious injury.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before
Turn off and lock out all power supplying this device before
working on this device.
working on this device.
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
turned on.
turned on.
Tensiónpeligrosa.
Tensiónpeligrosa.
Puede causar la muerte o lesiones graves.
Puede causar la muerte o lesiones graves.
Desenergi ce totalme nte antes d e instalar o darle servicio.
Desenergi ce totalme nte antes d e instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
Reemplace todas las barreras y cubiertas antes de
energizarel interruptor.
energizarel interruptor.
Use only with Siemens certified components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
1 Pole / Polos
2 Pole / Polos
4 X
6 - 32 X 3.00 in. [ 76 ]
2 X
4X
Frame – EG
Caja Base – EG
A
B
2 X
6 - 32 X 3.00 in. [ 76 ]
Frame – EG
Caja Base – EG
3 Pole / 3 Polos
4 X
6 - 32 X 3.00 in. [ 76 ]
Frame – EG
Caja Base – EG
Tension dangereuse.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Danger de mort ou risque de blessures graves.
Couperl'alime ntation de l'appareilet barrer avant de
Couperl'alime ntation de l'appareilet barrer avant de
travailler.
travailler.
Remplaceztouts les couverts avant que
Remplaceztouts les couverts avant que
l'approvisionnementde pouvoir soit alimenté.
l'approvisionnementde pouvoir soit alimenté.
5/32”
4 Pole / Polos
4 X
6 - 32 X 3.00 in. [ 76 ]
Frame – EG
Caja Base – EG
1
[
Interrumpir]
807891A03
Trip
1 / 4
66A3673H04
2
4 X 6-32 UNC-2B
2 X 6-32 UNC-2B
4 X 6-32 UNC-2B
4 X 6-32 UNC-2B
3
2.35
[59.7 mm]
3.81
.50
[12.7 mm]
1.00
[25.4 mm]
[96.8 mm]
4X
10 Lb. In.
[1.1 Nm]
2.35
[59.7 mm]
3.81
[96.8 mm]
.50
[12.7 mm]
2 Pole / Polos1 Pole / Polos
6X
10 Lb. In.
[1.1 Nm]
1.00
[25.4 mm]
3 Pole / Polos
10 Lb. In.
[1.1 Nm]
2.35
.50
[12.7 mm]
2X
[59.7 mm]
3.81
[96.8 mm]
[50.8 mm]
4 Pole / Polos
4X
10 Lb. In.
[1.1 Nm]
2.00
2.35
[59.7 mm]
3.81
[96.8 mm]
.50
[12.7 mm]
4X
10 Lb. In.
[1.1 Nm]
B
1 Pole / Polos
807891A03
B
2 X 1 Pole / Polos
A
A
2 Pole / Polos
3 Pole / Polos
2 / 4
4 Pole / Polos
4
Hazardous Voltage.
Hazardous Voltage.
Will cause death or serious injury.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before
Turn off and lock out all power supplying this device before
working on this device.
working on this device.
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
turned on.
turned on.
Option 1
[ Opción 1 ]
See chart for torque
[ Ver torque en la tabla ]
3TW1EG30
3TA1EG10
3TA1EG30
Tensiónpeligrosa.
Tensiónpeligrosa.
Puede causar la muerte o lesiones graves.
Puede causar la muerte o lesiones graves.
Desenergi ce totalme nte antes d e instalar o darle servicio.
Desenergi ce totalme nte antes d e instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
Reemplace todas las barreras y cubiertas antes de
energizarel interruptor.
energizarel interruptor.
Tension dangereuse.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Danger de mort ou risque de blessures graves.
Couperl'alimen tation de l'appareilet barrer avant de
Couperl'alimen tation de l'appareilet barrer avant de
travailler.
travailler.
Remplaceztouts les couverts avant que
Remplaceztouts les couverts avant que
l'approvisionnementde pouvoir soit alimenté.
l'approvisionnementde pouvoir soit alimenté.
A
Wire Connector
[ Conexión del
cable ]
3TA1EG10
( Cu / Al )
OPTIONAL
3TA1EG30
( Cu / Al )
OPTIONAL
3TW1EG30
( Cu Only )
STANDARD
Wire Size
[ Rango Cable ]
14 -10 AWG
[ 2.5 – 6 mm² ]
8 AWG
[ 10 mm² ]
6 - 4 AWG
[ 16 – 25 mm² ]
3 - 2 AWG
[ 35 mm² ]
1 – 1 / 0 AWG
[ 50 mm² ]
6 – 2 AWG
[ 16– 35 mm² ]
1 – 3 / 0 AWG
[ 50 – 95 mm² ]
14 -10 AWG
[ 2.5 – 6 mm² ]
8 AWG
[ 10 mm² ]
6 - 4 AWG
[ 16 – 25 mm² ]
3 - 2 AWG
[ 35 mm² ]
1 – 3 / 0 AWG
[ 50 – 95 mm² ]
Req. Wire Stranding
[ Hebras ]
UL 486A - 486B
CU / AL
Class
B
7
7
OK
CU
Class
C
19
3719
19
3719
19
37
Torque
[ esfuerzo de
torsión ]
35 Lb. in.
[ 4.0 Nm ]
40 Lb. in.
[ 4.5 Nm ]
45 Lb. in.
[ 5.1 Nm ]
50 Lb. in.
[ 5.6 Nm ]
50 Lb. in.
[ 5.6 Nm ]
80 Lb. in.
[ 9.0 Nm ]
35 Lb. in.
[ 4.0 Nm ]
40 Lb. in.
[ 4.5 Nm ]
45 Lb. in.
[ 5.1 Nm ]
50 Lb. in.
[ 5.6 Nm ]
50 Lb. in.
[ 5.6 Nm ]
Wire Strip
Length
[ Quitar ]
A
0.5”
[ 13mm ]
0.5”
[ 13mm ]
0.5”
[ 13mm ]
0.5”
[ 13mm ]
0.5”
[ 13mm ]
0.5”
[ 13mm ]
807891A03
3 / 4
5
Option 2
[ Opción 2 ]
5/32”
3X
34 – 38 lb. in.
[ 3.8 – 4.3 Nm ]
TNKE1 - 1 Pole / Polos
TNKE2 - 2 Pole / Polos
TNKE3 - 3 Pole / Polos
6
[ INTERRUMPIR ]
ON / I
TRIP
Note: If cover must be removed for any
reason, torque cover mounting screws to
OFF / O
6-7 Lb.in. [.68-.79 Nm].
[ Nota: Si la cubierta se debe qu itar por
cualquier razón, los tornillos de montaje de
RESET
[ RESTABECER ]
PUSH TO TRIP
[ PRESIONE PARA INTERRUMPIR ]
Technical Support: Toll Free: 1-800-964-4114 Internet: www.usa.siemens.com/powerdistribution
Subject to change without prior notice © Siemens Industry, Inc. 2009
Siemens Industry, Inc. , Norcross, GA U.S.A.
4 / 4
la cubierta requieren esfuerzo de torsión de
6-7 Lb.in. [.68-.79 Nm].
66A3673H04
807891A03
Loading...