· SAX319.. Operating voltage AC 230 V, 3-position control signal
· SAX619.. Operating voltage AC/DC 24 V, control signal DC 0…10 V,
4…20 mA
· SAX619.. Position feedback, override control,
choice of flow characteristic
· For direct mounting on valves; no adjustments required
· Manual adjuster, position indicator and status indication per LED
· Optional functions with auxiliary switches, potentiometer,
function module
For the operation of Siemens 2-port and 3-port valves, types V..F21.., V..F31..,
V..F40.., V..F41.., V..G41.., VVF52.. and V..F53.. with 20 mm stroke as control and
safety shut-off valves in heating, ventilation and air conditioning systems.
CE1Q4501en
2013-11-11
Building Technologies
Page 2
Type summary
Product
number
SAX319.00 S55150-A105-A900
SAX319.03 S55150-A106-A900
SiemensElectromotoric actuators for valvesCE1Q4501en
Building Technologies2013-11-11
Page 3
Product documentation
Notes
Detailed information about the New Generation actuators can be found in the Basic
documentation "Electromotoric actuators SAX.." (CE1P4040_01en).
Engineering
SAX319..
SAX619..
Mounting
Maintenance
Warranty
3-position actuators must have their own specific controller, refer to "Connection
Diagrams" (page 6).
Up to 10 actuators can drive in parallel on a controller output with a rating of 1 mA.
Modulating actuators have an input impedance of 100 kΩ.
Indoor useOutdoor use
1)
Only in connection with weather shield ASK39.1
1)
The actuators are maintenance-free.
The engineering data specified in chapter "Combinations" (page 2) are only
guaranteed in connection with the Siemens valves listed.
Note
When using the actuators in connection with valves of other manufacture,
correct functioning must be ensured by the user, and Siemens will assume
no responsibility.
3 / 8
SiemensElectromotoric actuators for valvesCE1Q4501en
Building Technologies2013-11-11
Page 4
Technical Data
1)
1)
2)
3)
4)
SAX..9..
Power supplyOperating voltage
Frequenc y45…65Hz
Fusing ac. DIN 57 100 part 430 (supply lines)6 A…10 A slow
Power consumption at 50 Hz
SAX319.00Stem retracts / extends3.5 VA / 2 W
SAX319.03Stem retracts / extends6 VA / 3.5 W
SAX619.03Stem retracts / extends8 VA / 3.75 W
Function dataPositioning times (with the specified nominal stroke)
The positioning time can vary, depending on the type
of valve, refer to chapter "Type summary" (page 2)
Positioning force800 N
Nominal stroke20 mm
Permissible medium temperature (valve fitted)-25…130 °C
Signal inputsPositioning signal ”Y” SAX319..3-position
Parallel operationSAX619..≤ 10 (depending on controller output)
Forced controlPositioning signal ”Z”SAX619.. R = 0…1000 Ω, G, G0
Position feedbackPosition feedback USAX619..DC 0...10 V ± 1%
1 – 2 frost hazard / sensor is interrupted (ther mostat closes with frost)
1 – 3 normal operation
F3Temperature detector
F4Frost protection monitor with 0…1000 Ω signal output, does NOT support QAF21.. or QAF61..
MMeasuring neutral
N1C ontrol ler
SNSystem neutr al
SPSystem potential AC/DC 24 V
UPosition feedback - (reference potential is M measuring neutral)
YPosition signal
ZPositioning signal forced c ontrol
6 / 8
SiemensElectromotoric actuators for valvesCE1Q4501en
Building Technologies2013-11-11
Page 7
Dimensions
Dimensions in mm
Revision numbers
Product no.
SAX..
With ASK39.1
SAX319.00..G
SAX319.03..G
SAX619.03..G
ABCC1C2DE►►►
242124150688280100100200
+25154300200100----
Product no.Valid from rev. no.
1,850
2,080
7 / 8
SiemensElectromotoric actuators for valvesCE1Q4501en
Building Technologies2013-11-11
Page 8
8 / 8
ã
2011-2013Siemens Switzerland Ltd.
Subject to
change
SiemensElectromotoric actuators for valvesCE1Q4501en
Building Technologies2013-11-11
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.