Data sheet |
5SJ4301-7HG41 |
Miniature circuit breaker 240 V 14kA, 3-pole, C, 1A, D=70 mm according to UL 489
Model
Product brand name
Product designation
Design of the product
SENTRON
Miniature circuit breakers
Miniature circuit-breaker 5SJ4
General technical data
Number of poles |
3 |
|
3P |
Number of poles / Note |
|
|
|
Tripping characteristic class |
C |
|
Suitable for environment B (immunity to interference not |
Installation environment regarding EMC |
|
|
applicable) |
|
5SJ4 |
circuit-breaker / Design |
|
|
20 000 |
Mechanical service life (switching cycles) / typical |
|
|
F |
Reference code / acc. to DIN 40719 extended |
|
according to IEC 204-2 / acc. to IEC 750 |
|
|
|
Overvoltage category |
3 |
|
|
Voltage
Insulation voltage / at AC / rated value |
440 V |
|
|
Supply voltage
5SJ4301-7HG41 |
12/28/2019 |
Subject to change without notice |
Page 1/7 |
© Copyright Siemens |
|
|
|
Type of voltage
Current / at AC / rated value
Supply voltage / at AC / rated value
Operating voltage
●at AC / acc. to UL 489 and CSA C22.2 No. 5-02 / maximum
●at DC / rated value / maximum
●at DC / 1-channel / acc. to UL 489 and CSA C22.2 No. 5-02 / maximum
●at DC / 2-channel / acc. to UL 489 and CSA C22.2 No. 5-02 / maximum
Supply voltage frequency
● rated value
AC/DC
1 A
400 V
240 V
60 V
60 V
125 V
50 Hz
Protection class
Protection class IP |
IP20, with connected conductors, IP 40 in the handle range |
|
|
Switching capacity
Switching capacity current
●acc. to EN 60898 / rated value
●acc. to IEC 60947-2 / rated value
10 kA
15 kA
Dissipation
Power loss [W] / for rated value of the current / at AC |
1.7 W |
/ in hot operating state / per pole |
|
|
|
Current
Tripping residual / rated value / derated current / at |
1 A |
40 Cel |
|
|
|
Main circuit
Type of voltage supply / at AC / acc. to UL 489 and |
240 |
CSA C22.2 No. 5-02 |
|
|
Mechanical engineering / industry |
Suitability for operation |
|
|
|
Product details
Product function / neutral conductor switching |
No |
|
Yes |
Product feature / Touch protection |
|
|
|
Product component |
|
● Tunnel terminals top |
No |
● Tunnel terminals bottom |
No |
● combined terminal top |
Yes |
|
|
● combined terminal bottom |
Yes |
|
|
Product feature |
|
● halogen-free |
Yes |
● sealable |
Yes |
● silicon-free |
Yes |
|
|
5SJ4301-7HG41 |
12/28/2019 |
Subject to change without notice |
Page 2/7 |
© Copyright Siemens |
|
|
|
Product function
Product function / Note |
Terminal tightening torque for Cu, 60/75°C; 3.5Nm/31lb.in |
|
|
Short circuit
Breaking capacity short-circuit current (Icn) / at AC / |
14 kA |
acc. to UL 1077 and CSA C22.2 No.235
Connections
Connectable conductor cross-section / finely stranded / with core end processing
●minimum
●maximum
Position / of power supply cord
1.5 mm²
25 mm²
Any
Mechanical Design
Height
Width
Depth
Installation depth
Number of width units
Mounting type
Mounting position
Net weight
90 mm
54 mm
76 mm
70 mm
3
on standard mounting rail
any
496 g
Environmental conditions
Influence of the surrounding temperature
Vibration resistance
Vibration resistance / acc. to IEC 60068-2-6
Ambient temperature
●minimum
●maximum
Ambient temperature / during storage
●minimum
●maximum
max. 95% humidity
50 m/s² at 25 to 150Hz and 60m/s² at 35Hz (4sec)
50 m/s² at 25 to 150Hz and 60m/s² at 35Hz (4sec)
-25 °C
55 °C
-40 °C
75 °C
Certificates
Reference code |
|
|
|
● acc. to DIN EN 61346-2 |
F |
● acc. to DIN EN 81346-2 |
F |
|
|
5SJ4301-7HG41 |
12/28/2019 |
Subject to change without notice |
Page 3/7 |
© Copyright Siemens |
|
|
|