Siegenia KFV Assembly Instructions Manual

Magnetic lock

Window systems

Door systems

Comfort systems

ASSEMBLY INSTRUCTIONS

KFV

ENGLISH

Assembly instructions : Magnetic lock 111

Contents

1. Introduction 6

1.1 Validity 6

1.2 Target group of this documentation 6

1.3 Correct use 6

1.3.1 Installation location 6

1.3.2 Locking part and hardware 6

1.3.3 Transport 6

1.4 Improper use 6

1.5 Care and service instructions 6

1.6 Installation conditions and requirements 6

1.7 Dimensions 6

1.8 Explanation of symbols 7

1.9 Instructions and symbols 7

1.10 Screw recommendation 7

1.11 Safety notices 7

2. Overview 8

2.1 Product presentation 8

2.2 Component dimensions 9

3. Installation 10

3.1 Cutting the door leaf 10

3.2 Screw on the magnetic lock 11

3.3 Changing the hinge side of the striker plate 12

3.4 Milling the door frame 13

3.5 Mount the striker plate 13

3.6 Adjusting the frame parts 14

3.7 Functional test 15

3.7.1 Checking functionality when the door is open: 15

3.7.2 Checking functionality when the door is closed 15

305.2016

KFV

4

KFV

Introduction

Magnetic lock 111

Lock

• Based on DIN 18251-1 class 1

• For rebated interior doors

• Quiet closing, pleasant acoustics

• The latch does not hit the door frame

• High-quality appearance thanks to flush latch position in gear box

• With permanent magnets (neodymium) in the latch and striker plate

• Brushed stainless steel secondary sash and striker plate

• Also available as a pure latch lock

• Secondary sash width 18, 20

• WC and BB (skeleton key)

Striker plate

• Stainless steel striker plate with neodymium triggering magnets

• Magnet can not be removed when installed

• Circumferential PVC backing with fastening points

• Third fastening hole between the latch and the deadbolt is possible

• Only available for the latch lock with latch cut out

• Fits standard milling

Technical specifications

Lock

Surface satin finished stainless steel

Secondary sash width 18, 20 mm

Secondary sash profile flat, rounded, 235 mm

Versions BB, WC and latch lock

Backset 55 mm

Spindle square 8 mm

Latch PVC with 2 neodymium magnets, 10 mm hook bolt

Deadbolt PVC, single turn, 10 mm hook bolt

Striker plate

Surface satin finished stainless steel

Length 170 mm with 8 mm vertical leg, edged

Fastening perforation 2 or 3 fastening holes (between latches and deadbolt aperture)

Backing PVC, perforation in the deadbolt area

Striker plates are available with recessed strike plates as an option

Striker plates for the latch lock available without striker plate opening

505.2016

KFV

Introduction