Siefken SBS002 User Manual
User´s manual
20V BRUSHLESS CORDLESS ANGLE GRINDER
SBS002
Operating Instructions
Please read the operation instructions meticulously and pay particular attention to the safety instructions.
CONTENT
BRUSHLESS TECH series
BRUSHLESS CORDLESS ANGLE GRINDER
General recommendations
Specications
Use and features
Maintenance
Warranty
1
2
3
8
9
Care for the environment!
It must not be disposed of with household waste! This product contains electrical or electronic
components that must be recycled. Take the product for recycling at the sites assigned to your
area, Ejm: the local recycling station.
BRUSHLESS TECH series
BRUSHLESS CORDLESS ANGLE GRINDER
General recommendations
The angle grinder is designed for cutting* and trimming, using the suitable disks, steel and
building materials (stone, brick, breeze-blocks, reinforced concrete, etc.). It can also be tted
with accessories and used for sanding and brushing.
• There is a whole range of sizes for grinders, generally 115 mm to 230 mm in diameter. The 115
mm - 125 mm models are generally used for carrying out small jobs, because they are light and
easy to use. The 230 mm models are used for much heavier tasks.
• The cutting* capacity of the grinders depends, to a great extent, on the type of disk used.
There are disks for cutting metal, sheet metal, masonry (stone, breeze-block, etc.)
• The speed control, if your machine is tted with one, makes trimming and sanding work
easier.
• The soft start function, if your machine is tted with it, makes it easier to start on the piece to
be ground more eciently and with greater precision.
• The trimming function can be used to remove burr that is left behind after cutting, for example. You must use a disk that is appropriate to the material, and work at an angle of around 25°,
and move the tool back and forth constantly and smoothly. The cutting* function consist to
work at an angle of 90° with an appropriate disk to the material.
*= Only with suitable not provided carter
1
Specications
* The charging time of the tool depends on the battery if it is 2.0Ah its charging time is 1 hour, if the battery is 4.0Ah and the time of
Charge is 2.5 hours
BRUSHLESS TECH series
BRUSHLESS CORDLESS ANGLE GRINDER
20VVoltage
Brushless Tech motorMotor
8.000RPMSpeed
115mmDisk size
4.000mAh Li - ionBattery
1 a 2.5 Horas*Charge time
Figure A.
2
5
3
1. On / O Switch
2. Lock button
3. Adjustable protection guard.
4. Adjustable handle
5. Clamping screw
1
4
2
Loading...