SICK S3000 Cold Store Addendum Operating Instructions

ADDENDUM OPERATING INSTRUCTIONS

S3000 Cold Store

Safety Laser Scanner

Addendum Operating Instructions

S3000 Cold Store

Subject to change without notice

This document is protected by the law of copyright, whereby all rights established therein remain with the company SICK AG. Reproduction of this document or parts of this document is only permissible within the limits of the legal determination of Copyright Law. Alteration or abridgement of the document is not permitted without the explicit written approval of the company SICK AG.

Addendum Operating Instructions

S3000 Cold Store

Subject to change without notice

Contents

1 About this document.........................................................................................................4

2 On safety............................................................................................................................. 4

2.1 Applications of the device.....................................................................................4

2.2 General safety notes and protective measures .................................................. 4

3 Product description........................................................................................................... 5

3.1 Special features ....................................................................................................5

3.2 Status indicators ................................................................................................... 6

4 Mounting ............................................................................................................................7

5 Electrical installation........................................................................................................ 8

5.1 System connection................................................................................................ 8

5.2 Parameter setting and diagnostics connection.................................................10

6 Care and maintenance ...................................................................................................11

6.1 Cleaning the front screen ...................................................................................11

6.2 Replacing desiccant cartridge............................................................................11

7 Technical specifications .................................................................................................12

7.1 Data sheet ...........................................................................................................12

7.2 Dimensional drawings ........................................................................................13

7.2.1 S3000 Cold Store..............................................................................13

8 Ordering information.......................................................................................................15

8.1 Delivery ................................................................................................................15

8.2 System available .................................................................................................15

8.3 Accessories/spare parts.....................................................................................15

9 Annex ................................................................................................................................16

9.1 Compliance with EU directives ...........................................................................16

9.2 List of tables........................................................................................................17

9.3 List of illustrations...............................................................................................17

Chapter 1 Addendum Operating Instructions

S3000 Cold Store

Subject to change without notice

About this document

1 About this document

This document is an original document. This addendum is only applicable to the S3000 Cold Store safety laser scanner with one of the following entries on the type label in the field Operating Instructions:

 8011877  8011877/TL59  8011877/YY95

This document is part of SICK part number 8011877 (addendum operating instructions “S3000 Cold Store Safety Laser Scanner” in all available languages).

This addendum only applies in conjunction with the original operating instructions “S3000 Safety Laser Scanner” (SICK part number 8009791).

If not otherwise revised in this document, the information in the original operating instructions applies, which relate to the S3000 Advanced safety laser scanner.

For the configuration and diagnostics of these devices you require CDS (Configuration & Diagnostic Software) version 3.50 or higher.

2 On safety

2.1 Applications of the device

The S3000 Cold Store safety laser scanner is used to protect persons and plant. The S3000 Cold Store is particularly suitable for use in cold environments.

It is possible to implement both stationary applications, e.g. area protection or gate protection, and also mobile applications, e.g. AGV.

Ambient conditions, e.g. rain, snow, fog or incident sunlight, are only compensated to a limited extent by the S3000 Cold Store. Usage outdoors in the open is not foreseen.

The safety laser scanner’s safety level corresponds to category 3 as per EN ISO 13849C1, it can be used up to SIL2 as per IEC 61508.

2.2 General safety notes and protective measures

Safety notes

This addendum must be made available to the operator of the system, machine or the vehicle where the S3000 Cold Store safety laser scanner is used, together with the original operating instructions. The operator is to be instructed by qualified safety personnel and is to read and follow the addendum; the operating instructions must also be followed.

Note



WARNING

Addendum Operating Instructions Chapter 3

S3000 Cold Store

Subject to change without notice

Product description

3 Product description

This chapter provides information on the special features and properties of the S3000 Cold Store safety laser scanner. It also describes the properties and functions that differ from the S3000 Advanced.

 Please read this chapter before mounting, installing and commissioning the device.

3.1 Special features

 protective field range 7 m

 warning field range 49 m (20 m at 20% reflectivity)

 180° scan area

 4 protective and warning fields (field sets)

 minimum response time 60 ms

 safe bus interfacing using SICK Intelliface products

 extended temperature range from –30 °C to +50 °C

The S3000 Cold Store is specially designed for cold environments. It can be used at ambient temperatures from –30 °C to +50 °C

The device meets enclosure rating IP 67 as per EN 60529 and is equipped with an internal, thermostatically controlled heater. The heater switches on as necessary. The safety laser scanner is ready for operation when the required temperature has been reached in the housing. The heater switches on automatically as necessary during operation (cyclic heating process).

 When the device is switched on, the warm-up process takes approx. 60 minutes at an

external temperature of –30 °C.

 Transferring the device from a warm to a cool area can cause condensation to form on

the front screen. In this case, the scanner shows  “Front screen dirty” and    or   . In this case, a warm-up phase of up to three hours is recommended to allow the

device to reach the ambient temperature.

Notes

Chapter 3 Addendum Operating Instructions

S3000 Cold Store

Subject to change without notice

Product description

3.2 Status indicators

In addition to the display elements from the S3000, the S3000 Cold Store has a blue LED on the right beside the front screen with the following significance:

Heater switched on, device warming up

Once the necessary temperature has been reached in the housing, the safety laser scanner is ready for operation (warm-up time at –30 °C: approx. 60 minutes).

During operation, the LED illuminates occasionally and signals “warming up”. The S3000 Cold Store remains ready for operation while the LED is illuminated.

 Blue

Fig.1:

“Heater switched on”

LED

Note

Blue LED

+ 14 hidden pages

SICK S3000 Cold Store Addendum Operating Instructions

Specifications and Main Features

Frequently Asked Questions

User Manual