Shyam Telecom HB 20 1900 User Manual

Antenna – Electronic
Communication Systems

Home Booster

0

HHBB--220

Home Booster 1900 MHz

IINNSSTTAALLLLAATTIIOONN AANNDD OOPPEERRAATTIIOONN MMAANNUUAALL

5700 9004 051 REV. 1.0 Feb, 2005

Proprietary Information

The information contained herein is proprietary to Shyam Telecom Limited. Use
or disclosure of this document or the information contained herein, for any purpose
other than that for which it was furnished is not permitted or it shall not be disclosed
or divulged to any third Party without the prior written cons ent of Shyam Telecom

Limited.

SHYAM Telecom Ltd.

A-60, Naraina Industrial Area, Phase-I, New Delhi-110028 (INDIA)
Tel: [phone] Fax: [phone] Email:

File Doc. No. Date Version Page
HB-20 5700 9004 051 Feb 05 1.0 1/12

[e-mail]

Antenna – Electronic
Communication Systems

Contents

PREAMBLE................................................................................................3

About the manual.....................................................................................3

1.0 About the manual...............................................................................4

2.0 Important Safety Information...........................................................4

3.0 Introduction: Booster Theory / Background.................................5

4.0 Description of HB-20 Booster installation Kit...............................6

5.0 System Design and Setup...............................................................7

6.0 Installing the HB-20...........................................................................7

6.1 Pre-installation considerations................................................................7

6.2 Installation Tools.....................................................................................7

6.3 Installation Procedure: Do It Yourself ....................................................8

6.4 Power Startup / Alarm Checks / Coverage Testing ................................8

6.5 Display Details of HB-20.........................................................................9

Technical Specification: Boosters HB-20..............................................10

Trouble shooting procedure HB-20.......................................................11

File Doc. No. Date Version Page
HB-20 5700 9004 051 Feb 05 1.0 2/12

Antenna – Electronic
Communication Systems

PREAMBLE

In cellular systems boosters / repeaters are used, to enhance the coverage of a
Base station in a region where, due to topological conditions, poor field strengths
disable communication. SHYAM is a leading manufacturer of boosters /
repeaters. These boosters / repeaters provide excellent electrical characteristics,
are lightweight and easy to install.

Any intervention has to be performed by authorized persons only. If you need
technical assistance, please contact at the following address:

SHYAM Telecom Ltd.

A-60, Naraina Industrial Area, Phase-I, New Delhi-110028 (INDIA)

Tel: [phone] Fax: [phone]

Email:

Under consideration of all references given in this manual, the repeater should be
taken into service without any complications and should operate trouble free for a
long time.

However we have country wide after sales support network to assist you if
required.

Please visit to our web site www.shyamtelecom.com
sales support offices.

[e-mail]

for our country wide after

About the manual

The “Installation and Operation manual” is intended to be used for SHYAM
HB-20 Booster installation. It contains the general guidelines for the field
engineers /technicians. Read carefully before starting the installation.

File Doc. No. Date Version Page
HB-20 5700 9004 051 Feb 05 1.0 3/12

Antenna – Electronic
Communication Systems

1.0 About the manual

The “Installation and Operation manual” is intended to be used for SHYAM HB-20
booster installation. It contains the general guidelines for the person installing the
HB-20 booster. Read carefully before starting the HB-20 booster installation.

2.0 Important Safety Information

The HB-20 booster has been designed for maximum safety when installed and
operated according to the instructions in this manual. Refer to all safety
instructions as per the antenna installation instruction sheets.

Do not bypass any of the safety features with the equipment provided, nor
operate the system in an inappropriate environment.

WARNING! Installation of antennas near power lines is dangerous. For your

safety, follow all installation directions and keep safe distance from any
high voltage power lines that could result in shock or loss of life.

WARNING! This equipment complies with FCC & IC radiation exposure

limits set forth for an uncontrolled environment. This transmitter must not
be co-located or operating in conjunction with any other antenna or
transmitter. The signal booster with server antenna must be installed to
provide minimum 20 cm separation distance between the server antenna to
the body of user or near by person. The donor antenna used for this
transmitter must be fixed-mounted on outdoor permanent structures with a
separation distance of at least 1.5 meters from all persons during normal
operation.

Additional wiring required to install the HB-20 system should comply with national
or local governing Electrical Codes. Indoor RF coaxial cable installations should
comply with local Electrical Code requirements.

The HB-20 booster is designed for indoor application. The housing is not
waterproof, so please keep it away from water, rain and any chemical liquid.

Do discharge the static before you touch the connectors of the booster.
Do not open the module inside the booster unless you are authorized.

The power supply unit in the HB-20 booster is supplied from the mains (primary
AC power) that contains dangerous voltage level which will cause electric shock,
Please turn off the mains before you install / uninstall the booster.

The primary AC power should be in the range of AC90-240V, 50/60Hz. Booster
will be damaged if the primary AC power is out of the range.

File Doc. No. Date Version Page
HB-20 5700 9004 051 Feb 05 1.0 4/12

Antenna – Electronic
Communication Systems

The RF electric performance of the HB-20 booster conforms to ETSI
requirement of the inter modulation and spurious emission. It avoids the
interference problem.

3.0 Introduction: Booster Theory / Background

In mobile cellular communication system, boosters provide the radio frequency
(RF) coverage to areas, which either lack signal, or the required signal strength
for adequate mobile phone performance. To the typical user, this translates to the
inability to place or receive mobile phone calls in or out of the area, and in most
cases will result in a dropped call while entering into the poor coverage area.

Insufficient wireless coverage can occur both indoors and outdoors, and may
include indoor areas such as office buildings, parking garages, apartment
buildings, shopping malls, and residential homes. Outdoor areas are degraded by
geographic topologies such as mountains, valleys, dense foliage and high rising
urban landscapes which can easily degrade or obstruct the cell site’s signal from
the mobile phone.

The weak coverage problem can be solved by installing an active booster
system, designed for use in a multitude of installation configurations. Booster
systems provide an effective solution by redirecting, filtering and amplifying the
available signal at the donor antenna, into the weak coverage area, through a
properly selected interior coverage antenna. The illumination of the weak
coverage area allows the user’s handset to operate as intended within the
building or weak coverage area, while maintaining the user’s call clarity and
quality, which reduces service complaints and potential subscriber churn.

Booster
Antenna

Figure 1: Typical Booster/Coverage Configuration

File Doc. No. Date Version Page
HB-20 5700 9004 051 Feb 05 1.0 5/12