Shuttle XS36VL Owner's Manual

XPC Bios User Guide
For the :
XS36VL
Shuttle®
XPC Installation Guide
Copyright
©2012 by Shuttle® Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means such as electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise, without prior written permission from Shuttle® Inc.
Other brands and product names used herein are for identification purposes only and may be trademarks of their respective owners.
Disclaimer
Shuttle® Inc. shall not be liable for any incidental or consequential damages resulting from the performance or use of this product.
Shuttle® Inc. makes no representation or warranty regarding the contents of this ma­nual. Information in this manual had been carefully checked for accuracy;however, no guarantee is given as to the correctness of the contents. For continuing product improve­ment, Shuttle® Inc. reserves the right to revise the manual or make changes to the speci­fications of this product at any time without notice and obligation to any person or entity regarding such change. The information contained in this manual is provided for general use by customers.
This device complies to Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must withstand any background interference including those that may cause undesired operation.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
Intel and Pentium are registered trademarks of Intel Corporation. PS/2 is a registered trademark of IBM Corporation. AWARD is a registered trademark of Award Software Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice
Other brand and product names used herein are for identification purposes only and may be trademarks of their respective owners.
Safety Information
Read the following precautions before setting up a Shuttle XPC.
CAUTION
Incorrectly replacing the battery may damage this computer. Replace only
with the same or equivalent as recommended by Shuttle. Dispose of used batteries according to the manufacturer's instructions.
Laser compliance statement
The optical disc drive in this server is a laser product. The drive's classication
label is lacated on the drive.
CLASS 1 LASER PRODUCT
CAUTION
AVOID EXPOSURE TO BEAM.
INVISIBLE LASER RADIATION WHEN OPEN.
Installation Notices
Do not place this device underneath heavy loads or in an unstable position.
Do not expose this device to high levels of direct sunlight,
high-humidity or wet conditions.
Do not use or expose this device around magnetic elds
as magnetic interference may affect the performance of the device.
Do not block the air vents to this device or impede the
airow in any way.
TABLE OF CONTENTS
Driver and Software Installation............................................................... 1
Mainboard Driver CD .......................................................................... 1
User Manuals ............................................................................... 2
Appendix.................................................................................................. 3
Starting BIOS ....................................................................................... 3
BIOS Setup Menu ................................................................................ 3
Main Setup ................................................................................... 5
Advanced ..................................................................................... 6
Power Management Conguration ........................................ 7
CPU Conguration ................................................................ 9
SATA Conguration ............................................................. 10
Onboard Device Conguration .............................................11
USB Conguration .............................................................. 12
Hardware Health Conguration ........................................... 13
Boot .................................................................................... 14
Security ..................................................................................... 15
Save & Exit ................................................................................. 17
Driver and Software Installation
Motherboard Driver CD
The CD contents attached in XS36VL motherboard are subject to change without notice.
The Motherboard Driver CD contains all the motherboard drivers necessary to optimize the performance of this Shuttle Xvision in a Windows® OS. Install these
drivers after installing Microsoft® Windows®.
Insert the attached CD into your CD-ROM drive. The CD AutoRun screen should appear. If the AutoRun screen does not appear, double click on Autorun icon in
My Computer to bring up Shuttle Mainboard Software Setup screen.
Navigation Bar Description :
Auto Install Driver/ Utility.

English
User Manuals - Motherboard Manual, Quick Guide.
Link to Shuttle Website - Link to shuttle website homepage.
Browse this CD - Allows you to see contents of this CD.
1
2
English
User Manuals
Install Adobe Reader 9.5
Motherboard Manual
Quick Guide
Appendix
Starting BIOS
AMIBIOS has been integrated into many motherboards for over a decade. In the past, people often referred to the AMIBIOS setup menu as BIOS, BIOS setup, or CMOS setup.
American Megatrends refers to this setup as BIOS. Specically, it is the name of the
AMIBIOS8 BIOS setup utility. This chapter describes the basic navigation of the BIOS setup screens.
Enter the BIOS
To enter the BIOS setup screens, follow the steps below:
Step1. Power on the motherboard.
Step2. Press the <Delete> key on your keyboard when you see the following text prompt:
Step3. After you press the <Delete> key, the main BIOS setup menu displays. You can access the other setup screens from the main BIOS setup menu, such as the Chipset and Power menus.
Press DEL to run Setup.
English
This manual describes the standard look of the BIOS setup screen. The motherboard manufacturer has the ability to change any and all of the settings described in this manual. This means that some of the options described in this manual do not exist in your motherboard's AMIBIOS.
In most cases, the <Delete> key is used to invoke the BIOS setup screen. There are a few cases that other keys are used, such as <F1>,<F2>, and so on.
BIOS Setup Menu
The main BIOS setup menu is the rst screen that you can navigate. Each main
BIOS setup menu option is described in this user’s guide.
The Main BIOS setup menu screen has two main frames. The left frame displays all the options that can be congured. “Grayed-out” options cannot be congured. Options is blue can be.
The right frame displays the key legend. Above the key legend is an area reserved for a text message. When an option is selected in the left frame, it is highlighted in white.
Often a text message will accompany it.
3
Loading...
+ 15 hidden pages